guraus Posted February 1, 2015 Share #1 Posted February 1, 2015 Hello all, Since I decided not to do any rigging on my Victory model and since I already made the lower main mast and top I decided to start this small side project to use the parts I've already made and also to put at good use the rope machine I bought a while ago. Additionally this will break a bit the monotony of repetitive work on full hull Victory. The section starts at the main mast and ends at the end of main channels and only from the quarter deck up. This allow me to do most of the main mast standing rigging - less the stays. Now I am imagining this project as the full main mast including the yards but no sails. This might change in the future. Here are some pictures with the progress so far. Regards, Alexandru harvey1847, mtaylor, CaptainSteve and 4 others 7 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted February 1, 2015 Author Share #2 Posted February 1, 2015 ... qwerty2008, Jeronimo, harvey1847 and 5 others 8 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted February 1, 2015 Author Share #3 Posted February 1, 2015 ... fatih79, harvey1847, Jeronimo and 6 others 9 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted February 7, 2015 Author Share #4 Posted February 7, 2015 Some progress: the deck is planked and nailed and started to work on the rails. WackoWolf, mtaylor, Fam and 5 others 8 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted February 7, 2015 Author Share #5 Posted February 7, 2015 ... Erebus and Terror, harvey1847, Jeronimo and 17 others 20 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
cwboland Posted February 8, 2015 Share #6 Posted February 8, 2015 WOW. Great idea to use parts that you've already built. Love the look of the rails. Will be interested to follow along and see how she progresses Quote Carl Completed builds: AL Bluenose II 1:75 Gallery Amati Hannah SIB 1:300 Gallery Current Build: Bluenose II - SIB - unknown scale Link to comment Share on other sites More sharing options...
Gerligand Posted February 8, 2015 Share #7 Posted February 8, 2015 Beautiful work. I see that you are using different types of wood. Would you mind telling us what you are using? Thank you. Looking forward for the rest of the build. Quote Pierre. Link to comment Share on other sites More sharing options...
guraus Posted February 9, 2015 Author Share #8 Posted February 9, 2015 Beautiful work. I see that you are using different types of wood. Would you mind telling us what you are using? Perre, I use different colours of wood as I don't like using paint or stains. The base is maple and I useed it just because it was readily available and it is very heavy and I figured it will be stable for the tall structure. Outer planking is pear, inner is purplheart, the deck is holy and the rails and channels are ebony. Thank you for interest. Alexandru mtaylor and Gerligand 2 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
jiljilia Posted February 11, 2015 Share #9 Posted February 11, 2015 Your very skilled, like what you have done so far! Quote Link to comment Share on other sites More sharing options...
guraus Posted February 18, 2015 Author Share #10 Posted February 18, 2015 Thank you all for the comments and likes. Here is a small update. Alexandru WackoWolf, mtaylor, kees de mol and 8 others 11 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
maltbyguy Posted February 18, 2015 Share #11 Posted February 18, 2015 (edited) excelent workmanship I bet its nice to work on a large ship and at a large scale means some great details Andy Edited February 18, 2015 by maltbyguy Quote Link to comment Share on other sites More sharing options...
guraus Posted February 22, 2015 Author Share #12 Posted February 22, 2015 (edited) Hello, I just got my new serving machine from Domanoff (http://www.shipworkshop.com - thank you for the amazingly fast shipping) and after assembling it I give it a short trial run. I am quite pleased with the results. But I am not there yet so I continued the work on the deck section. First I started making belong pins on my lathe using a method seen here on MSW. I am very happy with how they came also. I still have to do another 6 or so to have them all. Here are some pictures. Edited February 22, 2015 by guraus qwerty2008, yvesvidal, fatih79 and 5 others 8 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted February 22, 2015 Author Share #13 Posted February 22, 2015 ... yvesvidal, mikeaidanh, fatih79 and 8 others 11 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted March 2, 2015 Author Share #14 Posted March 2, 2015 Some more progress pictures. qwerty2008, WackoWolf, harvey1847 and 3 others 6 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted March 2, 2015 Author Share #15 Posted March 2, 2015 ... gjdale, SailorGreg, fatih79 and 6 others 9 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted March 2, 2015 Author Share #16 Posted March 2, 2015 ... mtaylor, AntonyUK, puckotred and 11 others 14 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
michael mott Posted March 2, 2015 Share #17 Posted March 2, 2015 Alexandru your use of the different colours of wood looks fantastic. Michael WackoWolf 1 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
cwboland Posted March 2, 2015 Share #18 Posted March 2, 2015 Those deadeyes look good. What kind of wood did you turn them from? Quote Carl Completed builds: AL Bluenose II 1:75 Gallery Amati Hannah SIB 1:300 Gallery Current Build: Bluenose II - SIB - unknown scale Link to comment Share on other sites More sharing options...
guraus Posted March 2, 2015 Author Share #19 Posted March 2, 2015 Thanks for watching and for your comments. Those deadeyes look good. What kind of wood did you turn them from? The wood is called "Castello" - it is the closest thing to boxwood I could find. Some SouthAmerican wood. Alexandru WackoWolf 1 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
gjdale Posted March 2, 2015 Share #20 Posted March 2, 2015 Your work continues to amaze and delight me Alexandru! WackoWolf 1 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
guraus Posted March 9, 2015 Author Share #21 Posted March 9, 2015 Hello all, thank you for following my build, likes and comments. Some more progress on the rigging - started to do the shrouds. Alexandru WackoWolf, qwerty2008, Landrotten Highlander and 2 others 5 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted March 9, 2015 Author Share #22 Posted March 9, 2015 ... Landrotten Highlander, mtaylor, druxey and 6 others 9 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted April 5, 2015 Author Share #23 Posted April 5, 2015 More progress fatih79, Tarjack, mtaylor and 3 others 6 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted April 5, 2015 Author Share #24 Posted April 5, 2015 ... Landrotten Highlander, qwerty2008, justsayrow and 3 others 6 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
guraus Posted April 5, 2015 Author Share #25 Posted April 5, 2015 ... Beef Wellington, Landrotten Highlander, WackoWolf and 8 others 11 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
Beef Wellington Posted April 6, 2015 Share #26 Posted April 6, 2015 Beautiful work as always Alexandru. WackoWolf 1 Quote Cheers, Jason "Which it will be ready when it is ready!" In the shipyard: HMS Jason (c.1794: Artois Class 38 gun frigate) Queen Anne Royal Barge (c.1700) Finished: HMS Snake (c.1797: Cruizer Class, ship rigged sloop) Link to comment Share on other sites More sharing options...
Mirabell61 Posted April 6, 2015 Share #27 Posted April 6, 2015 Alexandru, love that mast / Platform and its rigging related work Nils WackoWolf 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
guraus Posted June 21, 2015 Author Share #28 Posted June 21, 2015 A bit of progress today on this other project of mine: main topic metalworking. Alexandru mtaylor, gjdale, Landrotten Highlander and 6 others 9 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
cwboland Posted June 22, 2015 Share #29 Posted June 22, 2015 Great job on the metal work. I can hardly believe the tiny details you are able to get. WackoWolf 1 Quote Carl Completed builds: AL Bluenose II 1:75 Gallery Amati Hannah SIB 1:300 Gallery Current Build: Bluenose II - SIB - unknown scale Link to comment Share on other sites More sharing options...
guraus Posted November 23, 2015 Author Share #30 Posted November 23, 2015 Some more progress pictures for this project - some older some more recent. Alexandru ianmajor, ggrieco, GuntherMT and 14 others 17 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.