-
Posts
132 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by mhmtyrl
-
-
-
-
thank you all for nice comments and likes...
-
-
-
- ccoyle, Harvey Golden, mtaylor and 4 others
- 7
-
-
17 hours ago, GrandpaPhil said:
Nicely done!
thank you very much :-)
- mtaylor and GrandpaPhil
- 2
-
-
On 10/2/2020 at 12:17 AM, macleadg said:
Fantastic job! I just started building this model, too. I intend to build two of them, and to send them to my childhood friends whose father was a tugboat captain.
However, I am not an experienced modeler so any advice on how to achieve the weathering looks that you’ve done would be greatly appreciated. (I don’t particularly like the way the model looks when completed according to the instructions in the kit, but I love the way yours looks).
In particular, how did you achieve the look of corrosion on the keel? Also, where do you get copper plating? Are any special tools needed to apply the copper plating or do you just nail them on?
thank you very much :-)
weathering on the wooden parts are pretty easy, i first applied one or two coats of gloss varnish used in yatch decks. when dried applied 1 or two coats of pinotex as a wash. salt streaks on the hull are water based acyrlics, apply them as little dots with the bruh tip and used vertical brush strikes. also sanded pastel chalk works very well for darkening the edges such as deck buildings meet the deck. the rust was made via acyrilics and pastel chalk again.
for the sea creatures etc. on the keel, i used table salt. sprey water to the keel and applied table salt on it. that sticks to some degree and some of them fall, so you may choose to apply too much salt later to remove. than painted it with shades of green, and used white pastel chalk to blur its color.
i cut the copper plates with x-acto knife from a sheet. for the nail effects i used a little rotary piece, just run it over the cut piece (like cutting a pizza), and sticked them to the hull.
plastic modellers do fantastic job with these kind of items on battle ships, tanks etc. and there are great instructional videos on you tube, i highly reccomend watching them. hope these help.
best...
-
On 10/2/2020 at 9:12 AM, BobG said:
Outstanding! This is some of the best weathering I've ever seen. Really well done!
Thank you very much Bob
best....
-
- BobG, GrandpaPhil, sapperred1 and 2 others
- 5
-
On 5/6/2020 at 7:01 PM, BobG said:
This is a very interesting model and you are doing a fantastic job on the weathering. How did you weather the deck and how did you make the salt streaks?
many thanks Bob :-)
deck; after the deck was planked, I put some coal dust on it and rubbed it. the coal particles then accumulated in the recesses between the planks. later on, I applied 2 layers of gloss varnish (the ones we use for any wood work), when dried I did some washing with walnut pinotex (this should not be so much as it covers and darkens everywhere), so the recesses between the planks were further darkened by this way, lastly I added some pastel chalk to corners (where deck meets bulwarks or the deck buildings)
salt streaks; these are ordinary white acrylics. I applied in little spots and using another semi-dry brush apply vertical (from up to down) brush manouvers. if looks to much then you can just wipe it off. the surface of the hull was not very smooth, so wiping off was really a problem. pastel caulks can also be used (in fact I used it at some places. that being said, I feel that acrylics are not very suitable for salt streaks, as they dry too fast before you can apply vertical brush touches. next time I will use enamels.
hope it helps, the plastic modellers in youtube do fantastic job with these techniques. you can find many on web.
best
Mehmet
-
- Papa, BobG and GrandpaPhil
- 3
-
-
-
Hello everbody
I have started this model long time ago but did some progress only recently. This is a tug boat that have been in service for quite long time in İstanbul Bosphorus, later renovated and currently used as a museum boat. This is my first model that i used airbrush and copper plating. some more weathering such as salt streaks will be added.
-
I have used expanding foam in a previous build of mine. after expansion and completely dried I pressed on it, apply another layer so that it became slightly solid. I did not try to glue the planks on it (gues CA will melt it) but it served as a base for the planks to lay, supporting planks especially in tight turns. nice and easy method but really sticky and messy :-)
mehmet
- mtaylor, tkay11, thibaultron and 1 other
- 4
-
1 hour ago, Griphos said:
Beautiful work and incredible details. Judging from the ripples along the hull, she’s making pretty good way, but I don’t see any engine controls. I’m assuming diesel power?
I love models of working boats.
Thank you Griphos, these kind of boats are not in service for a quite long time, I dont have much info about the engine type or so...
-
15 hours ago, G.L. said:
Mehmet,
A very nice model again. Congratulations!
How did you make the sea surface and the waterjet from the pump?
thanks a lot :-) sea surface is epoxy resin and acrylic medium gel. after resin is dried completely I added medium gel randomly, when dried looks like ripples. water from the pump is thin stripe of transparent folder cover, covered with hot glue. later on I added some resin on it. you can bend it the way you want then.
-
-
On 2/11/2019 at 10:44 AM, G.L. said:
Mehmet,
I find the weathering very realistic. However if it was a real boat I would rather prefer to stay on shore.
Do you still plan to put it in a diorama?
Thank you very much. I also think that this boat is more suitable for shore in reality, but I will use it as a working boat. my problem is this actually, I can not weather the boats in an acceptable way for service :-) hope will achieve one day...
-
On 2/11/2019 at 7:57 AM, Omega1234 said:
Hi Mehmet
Well...my first reaction on seeing the pump was, ‘now that’s rusty!’ But, if you think it’s in keeping with the overall look and feel that you’re trying to achieve, then it looks appropriate.
Cheers.
Patrick
Hello Patrick, thanks alot for comments, I guess I will slightly renew it.
-
thank you all for comments and likes
do you think that condition of bilge pump is way too bad? I mean is the weathering too much? would like to hear your comments.
Dutch flat boat by mhmtyrl - FINISHED - 1:50 scale
in - Build logs for subjects built 1501 - 1750
Posted
Hello, sorry for not posting the photos of building stages, as I started this model on 2021, but most work was done in past 2 months...I think a real version of this boat would have allready been launched 🙂