-
Posts
399 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by Ondras71
-
-
On 2/18/2024 at 10:31 PM, FriedClams said:
Fantastic work on that boat, Ondras! Beautiful!
Gary
On 2/19/2024 at 1:37 AM, JFMJr said:For a first time builder.. and new to this site...this looks amazing... awesome..
Thank you very much friends. thank you for the like.
I'm continuing with the rotating chamber cannons on the railing, luckily there will only be four.
I found the current cannon in a book by Ab Hoving: Het Schip Van Wilem Barents and painted it.
Then the turning began. It is very small against already created cannons.
Created pockets for exchange chambers.
Of course, you need to start making a larger number, they slowly decrease during the work..
Added chambers..
Result OK..
-
-
-
-
-
-
I continue on the boat..🔥
I found beautiful photos of the Willem Barentsz boat replica. On the website of the modeler Heinrich. shipsofscale.com/sosforums/threads/high-hopes-wild-men-and-the-devil’s-jaw-willem-barentsz-kolderstok-1-50.8662/page-100
The tops of the ribs have been cleaned, the ribs have been cleaned inside, the top edge has been ground flat..
Completed the last rib and bottom of the boat..
Outer hull and bottom of boat waxed..🎨
Now the railings and benches..🔥💥
-
-
Another milestone behind me, the body of the boat finished, sanded and cut from the hoof with a razor saw..🔥💥
Again I used the option of dispersion glue. The sunken place on the bow after removal is wetted and pushed from the inside into the correct place..
A preview of the boat on the ship's deck..😍
Now clean the ribs and arrange.🔥
-
- druxey, thibaultron, mtaylor and 1 other
- 4
-
I continue on the work boat. Bending workshop..
According to the paper templates, I create more rows of boards, the edges highlighted with graphite..
The third row already has an extreme side bend. After a good soaking, the 0.8x3.5 mm strips can be bent well, just persistence. Step one - side bend..
Step 2 - after drying, bend into the shape of the torso, then fit.. I will save material against carving from wood plates..👍
The last part, closing the bottom. Too small, the bottom will not be visible, I helped myself by assembling the moldings from two parts. Otherwise, it would not be possible to do it well..🔥
-
- petervisser, GrandpaPhil, marsalv and 12 others
- 13
- 2
-
-
I continue on the work boat. According to the plan, the boat has colorful decorations. I didn't want to do this on the boat, but the color strip will match the whole boat..
So spray paint white and then red triangles. The board is 2.2 mm..
Red...
And the resulting decorations..
I'm repainting and now just clean wood...🔥
-
-
- marsalv, GrandpaPhil, Javelin and 8 others
- 11
-
-
So the WCHS 2023 pre-competition and competition time is over, the boat has returned from its trip..
...now to start building again and finish the rigging!🔥
- Javelin, FriedClams, scrubbyj427 and 8 others
- 10
- 1
-
On 8/20/2023 at 4:18 PM, Snug Harbor Johnny said:
There's a Gorch Fock in one display case there ... something I'm attempting to restore - estimated age 50 - 70 years.
You have great eyes Johnny. Of course, the plan in our "eastern" sector was for the Soviet ship Tovarišč.
-
Binding points laid on the bowsprit stump.
The ship is temporarily located in the museum in Rumburk as part of promotional events for the 2023 World Model Boat Championship in the Czech Republic. https://wchs-c-2023.eu/cz
-
-
-
-
Roter Löwe 1597 by Ondras71
in - Build logs for subjects built 1501 - 1750
Posted
I finished the swivel cannons on the railing.💥
I created new smaller chambers..
After blackening..
The last visible detail, the chamber pins..
The last parts of the hull, chamber guns, placed..
And now I can rush to the rigging!!🔥