Jump to content

Bedford

Members
  • Content Count

    896
  • Joined

  • Last visited

About Bedford

  • Birthday 10/20/1961

Profile Information

  • Gender
    Male
  • Location
    Camden NSW Australia

Recent Profile Visitors

1,204 profile views
  1. OK now I'll come clean, I sent Keith a PM after my previous post saying I didn't really know what it was I was just stirring the pot to promote the mystery of it. Although I did have an idea because I know how Keith did the cradle for Altair, it's his style.
  2. Some really nice work there mate If you're waiting for a heat gun to use on the heatshrink there are other ways to shrink it. A hair dryer works well as does a cigarette lighter, just keep a bit of distance between the lighter and the job. It doesn't take a lot of heat but you want to spread it around the tube so it shrinks evenly
  3. It's obvious what he's doing, I'm surprised you can't see it. I won't spoil his fun though!
  4. Mark, the windlass on Waratah has gypsies for the anchor chain and similar brakes though the axis is on the horizontal, the brake is manually adjusted as the anchor is lowered so yes someone has to stand there and effect a controlled descent of the anchor
  5. Now I know how to make what we call a gypsy for the anchor chain, thanks!
  6. John, the SHF shipyard is closed for the duration, no cruises either because it is run by volunteers and most are in the senior age group most at risk
  7. I'd follow a loco thread Michael As for covid, the Sydney Heritage Fleet shipyard has been closed down and all cruises cancelled because most of the volunteers are of an age deemed susceptible
  8. Keith, further to Druxeys comment, there is an old wood turning trick whereby you glue the quadrants together with paper in between then after turning it a sharp knife can be used to separate the pieces. Clearly you loose half the thickness of the paper from each face but that would not be noticeable in most cases.
  9. Dan, so sorry to hear it mate. Yours has always been a name on this site that has deserved respect, you're words of praise or encouragement are very highly valued, you'll be sorely missed. Fair winds Dan. Steve
  10. When you gotta shoot, shoot, don't talk - Tuco
  11. Love the oars Geert, I wouldn't have minded if you copied the leathering, that's what the site is about. Learning from each other, getting ideas from each other etc. Having said that, I do like the darkened rope on your oars.
  12. Yeah Keith, I'm replacing the broken drills with 10 packs. The HSS ones Eberhard mentioned would be great but I haven't found any and these are cheap. As for work holding I still have patience to learn in that area, I'll always try the quick easy way first but I can generally tell when I need to go the long route before I start something.
  13. Yeah Eberhard I considered making something better to hold the pins but I only needed 6 and have about 500 to work with. I'll have to keep my eyes open for better HSS drills but these are cheap and plentiful
  14. I got a set of micro drills last week and they've been very handy despite the steep learning curve using such fine drills in a machine, I broke the 0.3mm while getting the 0.4mm out! I cross drilled three of the 0.8mm pins with the 0.4mm bit before it snapped on the way out after drilling the hole, I think a bit of swarf came up with the drill and jammed it. I had to drill the remaining three holes with the 0.5mm bit which required very accurate centering leaving only 0.15mm either side of the hole. I couldn't hold the pins in a collet because I haven't got one small enough so I just clamped them in the machine vice and then used the 1mm bit to start the hole to prevent the smaller drill running off the side of the pin and breaking. The wire I used to put through the pin is 0.3mm diameter The pins were cut just past the holes

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...