Search the Community
Showing results for tags 'Horse'.
Found 3 results
After the tremendous help I received regarding the nature of the horse for the foresail, I find I have a further quandary. How to attach the foresail to the rail. I find the description given by Steel to be very confusing. He says: "Sheets reeve through a block made fast to the horse with a thimble, or, in some sloops, a dead-eye iron bound, and through a block at the clue, and so on, alternately, between the strap of the block and the seizing or dead-eye; then through the thimble at the clue, till the whole sheet is expended; then frapped together and hitched." I really cannot envisage this. It seems to say that the sheet is bound to the clue, then directly to a block at the horse, then to a block also attached to the clue, then to the seizing or dead-eye, then to the strap of the block at the clue then (after going back and forth 'between the strap of the block and the seizing or dead-eye') through the thimble at the clue and, when the rope is spent, frapped and hitched to the layers of rope so formed. I can't find a picture showing this, apart from a very indistinct picture from Cole's build of the Alert. I'd therefore be very grateful if someone could explain how the foresail is attached to the horse rail in this manner, especially if they could provide a drawing, illustration or picture. Just in case people reply after tomorrow afternoon, I'll be on a three-week trip starting mid-day Thursday 10th, and so may be unable to reply until I can find suitable wi-fi connections wherever I'll be staying. Thanks in advance Tony
I want to place a horse rail for the sheet of the foresail on the Sherbourne (English Revenue Cutter 1763). I have seen pictures of rails that run right across the deck along the top of the bulwarks, but it seems from a look at Steel's and Marquardt's books that the horse would lie quite close to the deck just in front of the mast. Unfortunately none of the models of cutters I have seen in the museums have such a horse, even though all the sources refer to one. Goodwin's AOTS book on the Alert doesn't show one either, although there is a tantalising reference in one drawing of the rigging which shows the sheet tackle disappearing from sight on to the deck with the caption 'secured to horse'. In fact the only one I recall seeing on a model is Kester's (Stockholm Tar) build of the Sherbourne. There he placed the rail across the fore gratings but I recall he was uncertain himself at the time of how exactly he should place it. My question is how wide across the deck should the horse rail go? My initial thought was to make it the same width as the one for the mainsail at the taffrail, but when I placed it on the deck it looked a little short at just under 4 ft (45 inches) full size on a deck whose width is nearly 19 ft. The other thing, of course is the height. I've thought 15 inches would be ok, but again am more than willing to hear from the experts. Any advice or wisdom will be gratefully received as usual. Tony
Looking far far ahead at some of the rigging instructions for my Rattlesnake privateer (I'm only at the first planking stage...), it has a "horse" (part # 125) for the mizzen boom sheet. #264 is the mizzen boom: On the model, this is bent brass wire. Anybody have an image or a description of how a horse actually looked? I don't know what the Model Shipways version does for this rigging. Lees in '...Masting and Rigging..." mentions the horse but suggests an eyebolt was generally used, such as this image from Petersson "Rigging Period Ship Models". I suspect using a horse versus the eyebolt was the model designer's choice and not necessarily the definitive arrangment. I'd likely go with the eyebolt version without a better vision of the looks of a "proper" horse. Thanks! Brian