Search the Community
Showing results for tags 'armed longboat'.
Found 2 results
1:24 Armed Longboat 18th Century, 1750-1760 Model Shipways Kit No. MS1460 Description For beginners and experts alike. A true plank-frame armed captain's longboat in 1:24 scale measuring approximately 24" from bowsprit to tip of boom. Every wood detail in the original longboat has been captured in 9 sheets of laser-cut basswood (no plywood) and over 60 basswood strips and dowels. Thirty-six cast Brittania metal (lead-free pewter) detail parts capture every iron fitting as well as the cannon and swivel guns. Brass split rings, rods, eyebolts, nails, parrels and belaying pins are machined and polished. Thirty-four yards and five diameters of jewelry, no-stretch and easy to knot nylon rigging replicates the original. Twenty-two walnut blocks and deadeyes compliment the rigging lines. All the decorations you see along the bulwarks and transom of the longboat are neither decals nor painted; they are photo-etched brass and are included. Technical data Scale 1:24 Length 26"/660,4 mm Height 17"/431,8 mm The kit 3 sheets of 34 x 44" plans in true to model size A 48 page instruction booklet with over 130 color photos. 9 sheets of lasercut basswood Over 60 basswood strips and dowels. One Photoetched brass sheet Thirty-six cast Brittania metal parts in high quality All needed rope All parts of the kit are stored safely and tidily in the box so as to minimise any movement of items within. Let's look deeper at this kit. As you can see all small parts are well stowed away. The castings make a very good impression. Let's check the cleanly lasered wooden boards. Backside as you can see perfectly lasered no much laser char. The basswood strips and dowels Photoetched parts Some brass stuff All the needed small parts are separatly packed The rope is unusually good for a kit like this. There are three fullsize Plans showing every detail The 48 page instruction booklet with over 130 color photos will make it easy to build a great model out of box for every one. Conclusion Good materials, detailed instructions and a really attractive price make this model a wonderful introduction to the world of historical ship model building. This little kit is really great. For the beginner, but certainly also for the advanced, who are simply looking for a small, loving intermediate project, this model promises a lot of fun and expansion possibilities (e.g. sails). ModelExpo currently lists this model on sale for $99.99 (retail is $169.99) and I think that represents really good value for money for this kit. Check the Instructions & Part List https://modelexpo-online.com/assets/images/documents/MS1460_18_Century_Long_Boat_Assembly_Instructions.pdf https://modelexpo-online.com/assets/images/documents/MS1460_Armed_Longboat_Parts_List.pdf My sincere thanks go to Model Shipways for sending this kit for review here on Model Ship World. To buy, go to your favorite dealer or directly to https://modelexpo-online.com/Model-Shipways-MS1460-18th-Century-Armed-Longboat--Laser-Cut-Wood-Metal-Photo-etched-Brass-Kit_p_3218.html
Well, this is my first wood ship model build, and build log, so I'll just jump right in. I found the 18th Century Armed Longboat on Amazon and thought it looked like a good beginner kit. Then while doing some research I found this glorious site and its great members! To my surprise, there were several completed build logs for this exact model! So after reading thru several and getting some great inspiration I decided to begin. However I did not thing of doing a build log until most of my hull was planked. I thought the process of planking was pretty straight forward, and the instructions were great and helped out a lot. I had a few problems with clamps denting wet planks, and learned a valuable lesson about sanding the rib supports to the proper angle before starting planking. Below are some pics of the fully planked hull. This was after the first rough sanding with 110 grit. I bent all the planks into place and only cut (i forget the proper term) the sheer plank and the last infill plank from a sheet of 1/16. The planking took me way longer then expected to complete. I used yellow wood glue and glued 2 planks a night, and formed and clamped 2 more. So it took a couple of weeks to complete. Time consuming, but I was pretty happy with the results, and only had minimal gaps to fill. Overall great fun and a good learning experience. Thanks for taking a look and any advice or comments are greatly appreciated.