Search the Community
Showing results for tags 'battle station'.
Found 3 results
After 40 years, i finally retired from job, and made a small "gift"to me. It is a small build that i want to work with my grand daugther, that like to work with me (i have some pictures with she working) Hope to be a future modelist Today i received the package Wait for her to start the build, and the log.
Open the box! The box; 58 x 30 x 6.5cm is not overbig, but a hefty 2kg according to the dispatch note, and it alarmed me enormously when I first took possession of it. It rattled as if every component within was loose and this worried me considerably. When opened it wasn’t as bad as it sounded. All the pieces were sound and tied together, the majority of the rattling must have come from the plastic box of preformed components which were well and truly mixed together! Having travelled 1,110 miles this isn’t surprising! The box contained said stout plastic box compartmentalised to hold the separate preformed components, an A4 manual c/w full colour photographs, a huge “poster” depicting 3 views of the finished build with limited nomenclature, two big bundles of firmly bound lengths of wood and four more smaller ones including what appears to be a short length of broom handle! This I assume is destined to be the mast, and by its huge diameter gives an idea of the big scale of the kit. Lastly the plinth on which the whole kit sits, and which indeed is an integral part of it. This is solid and quite well cut. Several laser cut sheets of various thicknesses were held together in a plastic bag. First impressions were good. The quality of the wood appears very high, as does the quality of the preformed components. The laser cut sheets do worry me a tad, as the laser cuts do leave wide gaps of un-burnt wood, and on thicker pieces this can lead to problems extricating the pieces intact, as I know to my cost. The manual however made me groan. The photos are fairly good, and plenty of them, each with individual items numbered. These numbers correspond to the parts list in the rear of the manual, where are also to be found the diagrams of each of the six laser cut sheets. What did make me groan though were the build instructions themselves. I think the word is minimal! Thankfully this shouldn’t be too complicated a build, but just as well if I had to rely on the instructions themselves. However I’ll persevere, the first job to paint the plinth black… Bryan
This is my build log of a Cross section from a British Man of War from approx. 1815. This was my first POB build. The Kit is from Panart. The Plans consisted of 1 double sided sheet in Italian.