Search the Community
Showing results for tags 'burton pendant'.
Found 1 result
As usual, once I arrive at the point of making a particular part, I find the details confusing. This time it's about the mast tackles. The Sherbourne kit that I have doesn't illustrate or mention mast tackles or Burton pendants. Similarly, the 1763 cutter model I photographed in the Royal Dockyard doesn't have any. On the other hand, one of the cutter models (1790) I photographed does show a similar tackle hooked to the base of the mast as follows: Furthermore, Petersson in his book 'Rigging Period Fore and Aft Craft' shows what he calls a Burton pendant and tackle as follows (though I have added text to point out the difficulty I have with his diagram): This made me think it might be a good thing to set up mast tackles. However, the moment I started looking at this, I thought that the diagram didn't make mechanical sense. It shows the runner going through what looks like a hook without a block -- which would mean it would have to run through a thimble. When I looked up Marquardt's book on Eighteenth Century Rigs & Rigging, he shows the following arrangement: This is very similar to that shown by zu Mondfeld and is clearly more sound (to my mind) in terms of mechanics. Marquardt also supplies the following information about cutter rigging (following Steel) -- the last two paragraphs of which I am at a loss to understand: "The mast tackle pendants were wormed, parcelled and served over their whole length. Each was doubled, and the bight was seized to create an eye which fitted over the masthead. The ends were then spliced together, and a single block was seized in the lower bight. The ends of all splices were tapered, marled down and served over with spun-yarn. The tackle runners had a hook and thimble spliced into one end and were served over. They rove through the pendant blocks and were spliced round the strops of long tackle blocks. The tackle fall was bend to a becket at the lower end of a long stropped single block, with the ends seized. The long strops, with hooks and thimbles spliced in, were hooked to eyebolts in the sides." Here, I don't understand the terms 'served over' and 'long tackle blocks'. I also don't understand which 'long stropped single block' is being referred to as having the becket for the tackle fall. As a result I don't really know whether it's right to put mast tackles on, and, if I do, whether to try to mimic Petersson's diagram, or whether to go for the kind of picture Marquardt shows. Any advice, comment or other will be, as usual, very welcome! Tony