Jump to content

Search the Community

Showing results for tags 'constructo'.

More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


  • The Captain's Cabin
    • Questions/instructions on how to use and post to this forum/Site Problems or suggestions
    • New member Introductions
    • Group Projects on Model Ship World
  • Member's Build Logs
    • Build Logs for SHIP MODEL KITS
  • Shop Notes, Ship Modeling Tips, Techniques and Research
    • Nautical/Naval History
    • Ships plans and Project Research. General research on specific vessels and ship types..
    • Building, Framing, Planking and plating a ships hull and deck
    • Discussion for a Ship's Deck Furniture, Guns, boats and other Fittings
    • Masting, rigging and sails
    • Model Tips and Tricks and Making Jigs
    • Modeling tools and Workshop Equipment
    • Metal Work, Soldering and Metal Fittings
    • Wood discussion
    • Painting, finishing and weathering products and techniques
    • CAD and 3D Modelling/Drafting Plans with Software
  • Ship Modeling News And Reviews.....Traders and Dealers...Ship Model Clubs
    • General Ship Model Kit Discussions
    • Reviews
    • Book, Monograph and Magazine reviews and Downloads. Questions and Discussions for Books and Pubs
    • Traders, Dealers, Buying or Selling anything? - Discuss New Products and Ship Model Goodies here as well!!
    • NAUTICAL RESEARCH GUILD - News & Information
    • Important Ship Model Club News, Links to ship modelling resources and museums
  • The Crew's Lounge
    • Nautical General Discussion
    • Shore Leave
  • Medway Longboat Group Project's Medway Longboat Build Logs
  • Medway Longboat Group Project's Plans and Instructions/Downloads
  • Medway Longboat Group Project's General discussions/How to join
  • Rope Making/Ropewalks's Ropewalk Plans/Downloads
  • Rope Making/Ropewalks's Discussions about Rope Making
  • Rope Making/Ropewalks's Rope Materials and parts resources
  • Rope Making/Ropewalks's Commercial sources for ropewalk machines
  • Intro to carving - typical decorative relief carving for ship models's Build Logs for the Carving Group Project
  • Intro to carving - typical decorative relief carving for ship models's Tutorials and Discussion for the Carving Group
  • Intro to carving - typical decorative relief carving for ship models's How to join this Carving Group
  • HMS Triton - 28 gun frigate's Cross Section Build Logs for HMS TRITON
  • HMS Triton - 28 gun frigate's Build Logs for the Full Hull Version of HMS TRITON
  • HMS Triton - 28 gun frigate's How to Join The HMS TRITON Group Build
  • HMS Winchelsea 1764's Member Build logs for the HMS Winchelsea
  • HMS Winchelsea 1764's General project discussions on planking, fittings and monograph chapters
  • HMS Winchelsea 1764's How to join this group project???
  • Planking Techniques's Click Here for Topics dedicated to planking!!!!
  • Planking Techniques's Planking Downloads and Tutorials and Videos


There are no results to display.

There are no results to display.

Marker Groups

  • Members

Find results in...

Find results that contain...

Date Created

  • Start


Last Updated

  • Start


Filter by number of...


  • Start





Website URL







NRG Membership Number

Found 36 results

  1. Hello everyone. In this thread, I am going to attempt to document the building of my latest model La Flore by Constructo. I bought this kit last year although I really hadn't had the time to build it until now, during the lockdown I have plenty of time and I work on it about 5 hours a day! I won't be writing many of the parts' names and forgive me if I make any mistake as English is not my first language and I don't even know some of the parts' names in Spanish! I am open to all the advice you can give me so come on!! I hope you like it!!! First some photos of the contents of the box. I had some issues with the "black" thread because as you can clearly see it is GREEN! I emailed Constructo but they didn't help me. They said sometimes this happens when the black colour is "lighter" than normal. I have been searching to buy a new thread and I think I have found some. As this is going to be used towards the end, at the moment it doesn't really bother me. Apart from this, everything is on the box well packed and in good condition. Constructo has good quality. Here I started with the false keel. Here I put some wood strips to hold the cannons on each side of the ship. I really liked this ship because of the gun line on each side. Then I glued the two lower decks. The prow deck and the waist deck. After this, I sanded the pins and started to plank both decks.
  2. Hello, my name is Samuel and this is my build log. This is my very first build, and I am super excited about it. Like I said in my introduction post, I was gifted a wooden kit of the HMS Bounty 1:110 (Constructo) a few years back and never got around to building it because I was scared of messing it all up. Now as I am a little older I started it as an "end of summer project" and I think I am about 3 weeks in and the ship looks good so far. There is still a lot of work to do, and I know I will not be able to complete it before I head back to school in the fall. I plan to post photos of the ship after every addition that I add, and will probably ask a few questions about how to do a particular step(s) and look forward to the day that I can show my friends the work that I put in on this ship. Attached you will see some photos of the ship once i decided to start documenting my work, and you should be able to see a very slight progression as time passed. I will also be posting a photo of the box and ideal finished product. Let me know if you would like any more photos and I will do my best to post them and answer and questions that you all may have for me. Here is the link to my "new member post"
  3. Please note that I built this kit 15 years ago so there might have been uptdates to the kit that I´m unaware of. Review HMS Pandora Constructo 1:85 ref.80824 Background HMS Pandora is best known as the vessel sent to capture Fletcher Christian and the mutineers of Bligh´s Bounty. After arresting the majority at Tahiti and then spending four unsuccessful months combing the South Pacific, Captain Edward Edwards decided to give up the chase and steer for England. In attempting to discover a new, more direct passage through Cook´s Endeavour Strait, between the northeastern trip of Australia and New Guinea, HMS Pandora was wrecked on the Great Barrier Reef on 29 August 1791. Thirty-one of the crew and four of the mutineers went down with the ship. Edwards, with the ninety-eight survivors, sailed four of the ship´s boats 1200 nautical miles to the Duch settlement of Coupang in Timor and eventually made their way to Batavia ( Present day Djakarta) There, those that did not die as a result of their privations, found passage back to England. The eventual court martial of the ten remaining mutineers resulted in three being hung at Portsmouth from the foremast yard of HMS Brunswick. The fate of Christian and the others who had sought refuge at remote Pitcairn Island was not discovered until 1808. By then, all but one were dead. ( Text from the manual) Construction of the kit Length: 32,5 Inches ( 78 cm) Height 24 Inches (58cm) With: 11 Inches (26,5 cm) The Constructo HMS Pandora is a plank on bulkhead construction with the option to make it a single or double planked hull. The colour and quality of the first planking strips are good enough to be left without the second planking. The second planking consists of veneer 0.6mm. thick which is relatively easy to work with but I find it a little too thin for hull-planking. Materials The wood in the kit is of mediocre quality and strips break easily while soaking and bending. This is compensated with the fact that there is a great deal of spare wood. The strips are made from Mulkaly (light Ochre), Sapelly (Dark Brown), Ayous (Ivory). The different colourations of wood strips results in less need for painting of the hull which displays the beauty of the wood. All fittings are either wood, brass or cast metal there are no plastic parts. Fittings The kit contains a lot of standard or generic fittings that are out of scale. What I mean is parts that you can find on other Constructo kits, so if you are looking for historical accuracy you will have to do a bit of research and scratch building. The cast metal parts are not the best I have seen and the transom is a disaster. It’s heavy, hard to fit and looks out of place when fitted to the ship. Manual List of parts and manual are in seven different languages which is commendable but the backside is that the different languages are mixed up. Every part is presented 7 times resulting in a manual that is a little hard to follow. The Manual is easy to understand when you finally find your own language but you need to have some previous experience in ship modelling to completely understand the instructions. The level of detail in the manual is at an intermediate level but this does not include the rigging. The rigging is explained by the plans and some very poor photographs this is not a task for a beginner. You really need to read up on rigging before trying to understand Constructos attempt for a rigging instruction. The pictures are in black and white and of poor quality. Constructo needs to improve the picture department a lot. There are also a few numeric errors meaning that the pictures and plans do not correspond to the numbers in the list of parts. Plans The plans are ok and mostly in scale admitting you to take accurate measurements. It helps if you have had some experience reading plans. For instance a plan showing the fittings on deck does not reveal both sides of the deck. You are to understand from experience that certain parts are to be fitted the same way on both sides Building experience I had some trouble with the poor wood quality but then again this improved my skills. I had no plan of making a historical accurate ship so the prefabricated standard parts did not bother me that much. Although I might sound negative I had a great time building the ship and the learning experience was over the top. The Constructo HMS Pandora was my second build and I can recommend it as a second or a third build. It’s of great help if one has already done the rig of a ship with at least two masts and has some experience of plank on bulkhead models. Reading my review might deterrent you from buying a Constructo Pandora-kit but keep in mind that these are my personal thoughts and I’m a little picky. Summary If you are looking for that second or third challenge but your wallet struggles against you, the Constructo HMS Pandora is a great kit for learning the skills of the hobby. It’s well worth the money you pay for it and is sure to give you many hours of fun and pleasure along with some aggravation but that’s part of the hobby. With a few scratch-built fittings and some book reading on the side, your model will look great. If you are a little more experienced and are looking for a high quality model kit with historical accuracy and perfected instructions the Constructo HMS Pandora is not for you. Ps: This is my first review ever so if you have any questions about the review or need some guidance building the kit, feel free to contact me through PM. Erik Nyren
  4. Hi everyone! This will be my official build log for Construto's Cutty Sark 1/90. I am already about 5 weeks into the build and finished the hull planking, deck cabins & decorations and is currently working on masts and rigging. I start my build log this late because I do not want to end up not finishing the model at early stage and everyone knows about it. While I was building the ship, I tried to stick to manufacture's plan with no side work of sketch builds. I will also not paint or stain my model as I think the original dark and light wood color scheme is quite nice. First is a little bit history of Cutty Sark form the Manufacture: "The Cutty Sark is a clipper ship. Built in 1869 for the Jock Willis shipping line, she was one of the last tea clippers to be built and one of the fastest, coming at the end of a long period of design development which halted as sailing ships gave way to steam propulsion. The opening of the Suez Canal (also in 1869) meant that steam ships now had a much shorter route to China, so Cutty Sark spent only a few years on the tea trade before turning to the trade in wool from Australia, where she held the record time to Britain for ten years. Improvements in steam technology meant that gradually steamships also came to dominate the longer sailing route to Australia and the ship was sold to the Portuguese company Ferreira and Co. in 1895, and renamed Ferreira. She continued as a cargo ship until purchased by retired sea captain Wilfred Dowman in 1922, who used her as a training ship operating from Falmouth, Cornwall. After his death she was transferred to the Thames Nautical Training College, Greenhithe in 1938 where she became an auxiliary cadet training ship alongside HMS Worcester. By 1954 she had ceased to be useful as a cadet ship and was transferred to permanent dry dock at Greenwich, London on public display. Cutty Sark is one of three ships in London on the Core Collection of the National Historic Ships Register (the nautical equivalent of a Grade 1 Listed Building) – alongside HMS Belfast and SS Robin. She is one of only three remaining original composite construction (wooden hull on an iron frame) clipper ships from the nineteenth century in part or whole, the others being the City of Adelaide, awaiting transportation to Australia for preservation, and the beached skeleton of Ambassador of 1869 near Punta Arenas, Chile." There are some photos of the packaging.
  5. Been a looong time since I’ve posted here, but I thought I’d drop in and give an update on my build. I recently dusted her off, found a spot on the work bench and am continuing the build. It’s slow going, just a piece or two a night between diner and bed, but I’m starting to see the slow progress. Excuse the mess, we’ve recently moved and I haven’t arranged everything yet:
  6. First off, would like to say thanks to Paul0367 and his amazing build so far, that hopefully I can avoid some of the pitfalls on this build. Next I would like to add, that this is not a historical representation of the Victory but more a decorative interpretation of her. That being said, I hope to build the majority of the kit to be more accurate and in the end it’s all part of the fun. Refference galore with all the usual suspects in there, Longbridge, McKay, Goodridge, etc Victory and man of war related as well as others. Commenced the build at the end of February, so now have some build to start sharing. Some framing Using the 4 butt shift method for deck planking, instructions in the kit are basically to lay big long lengths. On to the main deck Deviation here, decided to use walnut, narrower strips rather than the Sapely that is supplied. Also to add a little detail with the windows, as in the kit these are just left as blank bulkheads. So onto the next stage, did find this keel clamp by Expotools at a 1/3 of the price of the Amati, must say have found it to be of decent construction and allows me to work on the model in many different angles.
  7. I bought the kit in 2008. This far I have: Glued the frames to the keelson Glued the decks in place I am now at the stage where I have to shape the ribs. I am not sure how much I must do this? How is the part that must be beveled measured? The instruction manual mention marking the the edge of the rib with a felt pen. I'm not sue how and by how much? I also, on advice, filled the front between the keelson and the front frame with soft wood to make planking easier. Did I do it right?
  8. Well, I thought I better get my build log back from where I left off.
  9. Greetings, after thinking for a long time and being un succesfull with plastic-kits i buyed my first wooden kit the HMS Prince of 1670 by Constructo around May-ish from Spain. With alot of Pause in between my work sessions i finally managed to get the first Plank on. getting started in May: Sadly i used the wrong deck planks at the bow these were intended to be the vertical Walls . June: after some break adding the fake decks and adding the first planks huray. Sadly i later had to find out that the fake decks accidently shifted around 1-2mm to starboard wich is causing me some minor problems wich take some time to fix. August - November: adding more deckplanks and the first Bulkheads/vertical Walls. Later November: getting the first Planking on the hull. i hope to get the basic Hull done befor new year. Some tips about steaming the Planks for easyier bending are alot welcome, the material is 2mm x 6mm thank you in advance
  10. Hi all, this will be my log for my first ship build: the Lady Smith kit by Constructo. I had planned on ordering a kit from the internet, but after a stop at a very unique local model store I found this on the shelf and brought it home: The box was in good shape and everything was packaged really nicely so I figured it was worth a shot. Being my first build, I wanted something that would be challenging but perhaps not as much so as a ship with considerable rigging. This seemed like a good balance, though to be honest, having read through everything, I may have bit off more than I can chew at this point.. Here is my workspace. I was quite pleased to see a plan, instruction manual, and a photo booklet showing the various steps. Right off the bat my main concern is that there are two thin plywood sheets of parts (including the decks) that are significantly warped. I've soaked and steamed them but I think they are unrecoverable. My guess is this kit had been sitting on the shelf for quite some time. Thankfully the thicker plywood which has the false keel andbulkheads is straight so I at least have a decent starting place. My plan is to find some thin plywood (looks like 2mm according to the parts list) and recut the warped pieces unless by some miracle they straighten out after sitting under weight. I was hoping to get started but I think patience will be key and getting new plywood for the decks at the very least will be worth it. Thanks for looking and I plan to keep updating as I make progress.
  11. Hello readers of this forum, My name is Hjalmar im 31 years old. I Work with computers and at a brewery. Previously i've built a model of the santa maria it was my first model and plank on frame scratch built. Not nearly as nice as some of great ships built on this forum, but was good for learning a bit. Then i built this model of the half moon also scratch. I hope noone minds too much the topic is unfinished, but the ship itself is also unfinished. The rigging is most of the work still to do on it. And improve some details. Now im making a kit model from constructo. The Enterprise built in 1799 i believe. A bunch of pictures will illustrate my progress so far. I used epoxy glue to make a strong hull construction. Because the bulkheads were flimsy, not strong. I foresee alot of problems i will need to solve: - The planking is not tapered of bent (dont know if its called tapered) bent sideways. To make the planking lay flat against the bulkheads as they curve. I didn't see how to make that bend in the planks and didnt have materials in the kit to make them. So the planking is not correct according to the "rules". But i also cant do this with the second layer of planking strips. Its 0,5mm x 5mm sapelly. - Drill the holes for the masts without destroying the ship, and more even, drilling the hole for the bowsprit without ruining the planking. The last picture is the planking after making it wet to see a stain effect. It looks decent, but the planking is incorrect, but i dont know how to make the necessary planks with just the strips of veneer.
  12. Hello MSW, First off thanks for checking out my inaugural wooden kit build. I will do my best to document my experience bearing in mind that this kit has been discontinued by Constructo. For the record: these are completely uncharted waters for me so I will likely be asking lots of specific questions. I have read a number of build logs on MSW now and done a fair bit of research, but I am looking forward to finally engaging with the community. Without further ado, from Toronto where we have some proper arctic weather (feels like -27°C), here is The Gjøa. For those unfamiliar, The Gjøa was the ship with which Norwegian Explorer/Capt. Roald Amundsen first sailed the Northwest Passage. Below are photos from my first afternoon. The false keel/bulkhead board was thankfully (relatively) warp-free so I jumped right in. I was also happy to see that the false keel was 4mm thick, and rigged up a keel clamp using a couple of camera tripod ballheads, a 4mm thick piece of aluminum (used to offset camera flashes) on a 90° attachment, and some small clamps. Since this kit doesn't allow for a building board/groove this spot was a concern for me, but so far everything seems to have worked out to my eye. FYI I was actually working on an old tripod, and since gluing/taking the photos I have repositioned the clamps to provide more support. First feelings: relief. Constructo's english instructions aren't so bad. The wood seems to be a nice quality/tone (Sapele, Ayous, Manzonia, Mukaly, & Anatolia for masts), and I'm feeling pretty decently prepared for a beginner. I know the hard parts are yet to come. I look forward to feedback. Off to sand her down for the deck, Simon *edited for font size.
  13. Reading this forum has helped me so much, so I though of sharing my first build project with Mayflower by Constructo kit. Specially pictures have been great help because these instructions (at least for a newbie) has been awful. Secondly I didn't exactly know what I actually started, before I needed to do first hull plank pending... Since I started this project few weeks ago, I try to put dates to different phazes that might help some newbie like me getting the understading how long it takes . Project starting 10.4. 12.4. Keelson, frames and false decks glued. These were ready cut parts so it was simple. First mistake: At this point I measured ~ish by eye that everything was in 90 degress angle (I come to this later, but it might be that this caused a slight pending of the hull later (or the fact that I used slightly force in hull plank pending).
  14. In 1988, at the age of 35, I bought the cross-section model kit of the Constitution from Mamoli, (which is still available). During a long illness at that time, I built the bulkhead, easily planked the 70mm length surface and carved the multi-deck furniture. I put it away at that stage, having returned to health and work. Admittedly, I was also intimidated by the rigging and mast/spar construction ahead. Over the years, I made sure to preserve the model, though not very delicately. I must have used good glue as I lost no parts or furniture. Now I'm 61 and returned to this Constitution about 8 months ago. I thoroughly enjoyed finishing up all the fittings and furniture. I then tackled the rigging. Other than some basic work, I left it without finishing the mast, spars, shrouds or sails. I am pleased and proud of it anyway as this was my first build. My second build was just finished - the Gretel by Mamoli. It is an 18th Dutch pleasure yacht, which was the early era of such vessels. The whole construction took me about 8 weeks. I now realize how rushed that time frame was. The planking was difficult but I pushed ahead without reading up on this skill. The finished product was flawed, with gaps and razor thin splines. But the decking, mast, spars, gaffs and wood fittings went very well. And this time I completed the rigging! Mamoli makes challenging models in my opinion, with skimpy supplies and inaccurate plans. I had to make a lot of emergency alterations because of some misleading illustrations and quality issues. I do have to say the wood was top quality (except one warped delaminated plywood deck). Now, on to my third build, which I share here. I'll need support and advice on this project! Pilar made by Constructo. I ordered the Pilar because it will require a lot of planking. I didn't do even a good job on the Gretel, so I now have an eighteen inch long model to be completely planked, top to bottom. Great practice! The romance of the Pilar being Ernest Hemingway's yacht also makes it even more interesting to build. The original boat still resides in a Hemingway museum in Cuba. I received the kit via UPS from Florida to Boston today in great condition. I opened the box and saw that all the plastic bags of parts had shifted out of their compartments. The attached pictures depict the contents that I had to reorganized by part number / step. Mamoli had a hard, transparent lid that sealed each compartment, so that parts were less likely to get lost. The first problem I am encountering was evident when I removed the timber. Other than the thicker lime for the first planking, the wood is a mystery. There is one bundle of a single species, which is encouraging if I can figure out what species it is and where it will go. The other two bundles contain a variety of unmarked wood in different shapes, thicknesses and species. These woods are exotic, not the standard walnut or mahogany. Very confusing and irritating. Signing off for now from this first post. Thanks for reading. I promise to be less wordy in the future as the build progresses. First thing is for me to read the instruction booklet and plans, then read it again, and then it read for the third time. No rushing!
  15. Good day all, I've been browsing the forums for the past couple of weeks as I begin my Enterprise build (my first). First off, thanks to all for the contributions, it's already been very helpful to me. I've got to set myself up to transfer the pictures I've taken thus far into this thread, hopefully I'll have time this weekend. I've been reading through the many other Enterprise build logs but haven't been able to get a clear answer on something, I was hoping to get some feedback. I'm close to starting in on the hull planking, and my question is this: have most people done a second planking using the veneer? As well, what is commonly used to hide the nail holes once they are removed, by that I mean any specific brand/color well matched to the wood? I can assume this is a relatively moot point if the veneer is used ... Finally, are most people using water to soak their hull planks? I've seen the references to ammonia but not sure how widespread this is? Thanks all, looking forward to posting more as I progress, Mark
  16. Hi all. I am new to MSW but hopefully will abide by any rules. Apologise in advance if I have completed title incorrectly. I am awaiting my delivery of the Enterprise 1799 from Constructo kit number 80837. I also own the previous kit 80822 which does not have the colour manual. Hopefully I will start my build log with pictures very soon (hopefully tonight/tomorrow morning). After reading many comments about what to look for, I like the look of this ship the most hence choosing to buy. I have made many plastic, resin and smaller wooden boats including planking and look forward to starting this project. Please feel free to add any comments and recommendations you feel necessary and I always welcome criticism where it is due. Photos will be uploaded shortly
  17. I hope I am going about this the right way. It is my first time to attempt a build log so if I am making mistakes I would welcome correction. This, the Cutty Sark was given to me by my son more or less as you see it. I only have applied the planking veneers to the aft [?} deck and am now shaping and sanding the aft wedges. Crooman
  18. Just opened a bottle of wine to help me post this. Before I start as I said in my newbie post I have never even attempted an air fix never mind a wooden boat kit so to say I'm new to this is and understatement. I'm self employed and spend way to much time on the interweb and stuck in front of a screen so I needed something to keep me busy when I finally finish a day of work. I don't have any of physical skills that I presume most builders on this site have so this is going to be a challenge for me. I am absolutely in awe of some of the models on this website and completely Sh*~#ng myself to put up even one photo. I wasn't going to do a build log until I read Bindys an got some inspiration Thanks Bindy Mods if I do anything wrong feel free to do edit or change whatever I have messed up I bought the kit in marks models in Rathcoole Co Dublin In fairness to him he didn't try to upsell to me even when I asked about extra tools and equipment " take it home have a read of the instructions see what ye have in the shed then come back to me" which I did then I went back bought a hammer and some clamps. On opening the box "Oh sweet love of god" there's millions of bits an I cant even see some of them !!!!! Am look at the bleedin drawing I'll never do this ..........................................
  19. Since I joined here late, im on the Masts of the Ship Grimsby, Ill post some pics of the ship, but there is still more work to do on the fittings such as cannon rigging and the Anchors, since both broke Im starting over on them, Constructo has been great on supplying me with a new set of Anchors as well as the masts that are warped, heres a few on making the parts for the Main Mast, I just realized my Dark Wood glue is dried uop and I need a new one, It works well on the Sapelly, heres a few Pics, one of my Ship Shop and the Mast, one question, on the Print what is used Rigging or wire to make the wrapped areas on the masts? I was lucky to grab some sappelly scraps at the shop I work at when we did a job with that wood, i made numerous parts that didnt work out in the kit
  20. First time builder. Selected this particular model as it seemed a compromise between the kids stuff and the real thing. Very excited. Everything out of the box. You all know how it is. Spent some time reading instructions and studing plans. Realised there were some gaps in the information. The plans include a longitudinal section but not a cross section of the hull. Luckily noticed GuntherMT on this forum so am following his lead, although at a much slower pace, as his comments answer some of my anticipated problems. Frames now fixed to false keel, probably sbould have ensured they were at right angles, but hoping for the best. Had the same problem with aligning the top of the frames with the false keel, decided to make them align by adjusting the depth of the slot on the frames. I hope this does not compromise the planking. Avoided the misplacement of the aft wedges as there is a gap shown on the section [although why I do not know, it must be easy to make the piece the right shape]. Step 1 nearing completion.
  21. Hi All, This is my first build log on Model Ship World though I have been a lurker here long before the 'Great Crash'. There are several excellent build logs on the Enterprise by Constructo already in the forum: JLuebbert, Archicar, SRC, Probablynot, I view mine as an additional compliment to these builds. I am working with the 'Old' version of the Enterprise kit with the 'limited' instructions, and the links above have informed my approach to this kit. Frankly without those above build logs and others scatter around the internet this kit would probably still be in the box. I have been building models, both kit and scratch, for well over 30 years but this is my first 'Wooden Ship Model'. I also mold/cast resin pieces for wargames and some of that work is found on my blog. I consider miniature and plastic kit modeling as my foundation skills which I plan to draw together as I learn new ones, ultimately bringing everything to the next level with this project. My father-n-law, who has been an avid recreational sailor all his life, turns 70 in September 2014. The Enterprise will be a gift for his birthday, and as recognition of all the help and support he has provided my wife, children and I over the last two decades. He is my build 'motivation' for this project. The choice of this particular kit came by way of a barter as partial payment for another project (one thing leads to another). At the time, around 2009, I did not know the relative complexity and lack of instruction of this particular kit. I read a very nice review about the Enterprise kit, unfortunately I did not know that there were two versions of this kit and the review covered the 'newer' one which has photo instruction. I felt the kit would push my skill set but the photo instructions would provide the crutch to get me through any tight spots. What a surprise when I opened it and discovered that I had an older version with no real instruction. I dug through the kit and then shelved it (until last week) feeling it was above my skills in 2009. If the kit had been opened I would have felt scammed but I do not think the client had any more idea of the limited instruction than I. The client had aquired the model as part of an inheritance after a relative passed. Since I acquired the kit I have read several books on Wooden Ship Modeling and many more build logs. This kit has lingered in the back of my mind over the years and my father-n-law's coming birthday pushed me to finally get going on it. I am no expert in building Wooden Ships but I feel I am ready for the challenge; and so that is how this kit ended up on my bench, as my inauguration into Wooden Ship Modeling. I look forward to this project and hope you too will enjoy this build.
  22. Hi guys here is my next build the Halifax. I saw this kit on ebay for a very good price, it was new and still sealed so I could not resist. I have a few other reasons for choosing this kit, below. 1. I wanted a ship from the mid to late 1700 period. 2. I wanted a ship with a few more cannons than the Virginia. 3. I wanted a kit that would be a little more detailed. 4. More important than the first 3 reasons, I wanted more rigging. I have checked the kit everything looks good all accounted for and no damage except a warped false keel. I already like this kit better than the Latina kit, the wood looks pretty good, the instruction appear to be a little better and more important most but not all of the fittings are wood. I could only post a pick of the box as in the process of correcting the warped keel I snapped it in half oops! to bad I almost had it straight, it has been glued and clamped but I want it to dry over night. When it dries I will add some ply wood along the break for strength. All comments welcome.
  23. HMS Endeavour, also known as HM Bark Endeavour, was a British Royal Navy research vessel that Lieutenant James Cook commanded on his first voyage of discovery to Australia and New Zealand from 1769 to 1771.
  24. I will attempt to rebuild my log from the beginning. The Mayflower by Constructo is my first big wooden kit. My previous experience is an Atesania Latina Viking. I've built numerous RC trucks/cars, a few wooden airplanes and many plastic models. This has been my biggest challenge so far in my modeling endeavors. I've struggled quite a bit on the planking of the Mayflower but I'm really enjoying the experience. So far I've been at work for about 18 months. This has been an off and on project as I find time. To make sure I don't neglect the project it stays out on my work table in my home office. I won't fall prey to "out of sight out of mind." I'm currently in the planking process still. My technique is getting better as I go, but I'll definitely be taking advantage of the second planking material provided in the kit. Please feel free to offer advice, laugh, or sympathize with my progress. I look forward to re-engaging everyone on the forum.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
  • Create New...