Search the Community
Showing results for tags 'racing'.
Hello there: This log will document my first attempt at a scratch built ship model. I've chosen to start with something more or less straightforward -- a 1:64 scale plank-on-bulkhead Bluenose based on Model Shipways' plans. I purchased the plans for the 1:64 MS Bluenose several years ago while I was working on the Amati 1:100 Bluenose. I wanted the plans as reference for the rigging, which on the smaller Amati kit had been quite radically simplified. Since then, the plans have been gathering dust in a drawer. But I always imagined that I might return to them once I felt ready to embark on a scratch build. The choice of Bluenose, then, was guided by the fact that I own the plans, which include reference drawings of all the laser cut parts, as well as by the fact that I've built the Bluenose before (though in a smaller scale). I also felt that, though clearly the principles are different, cutting my teeth on a p.o.b build would be a good way of getting into scratch building with an eye to a fully framed ship model. In any case, everyone knows the history of the Bluenose, so I won't repeat it here. This log will be more like a documentation of my clumsy entry into scratch building. Since I'm also working on the Mamoli America as a gift for a friend, the Bluenose build will no doubt be very slow. I also plan on continuing with kit builds alongside this project, which will also no doubt slow it down. The need to acquire some tools (and save some money in order to get them) will also slow things down a bit - currently, I'm equipped with a bandsaw, which I'll use to cut the centre keel pieces and bulkheads, but I can already see the utility of a disc sander and mini drill press.....I think for this build I can wait on other things like a mini table saw, but I'm going to assume that the priority of tool acquisition will become clearer as I work through the build.... I know that there are a lot of Bluenose logs here on MSW, but I hope that this log will add something to the mix. For starters, here are a couple of photos - my tracings of the centre keel pieces and a practice-run at the bow piece using 1/4 basswood - it's pretty rough, as you can see. This was made to help me get a feel for the bandsaw and is out of scale thickness in addition to being kind of ratty. I'll be using 3/16 birch ply for centre keel, bulkheads, rudder, and sternpost. I bought some of this today at a local hobby shop, but it is not very good (lots of warping). I'll use this to do more bandsaw testing and try another source for the ply. Well that is all for now....those who've looked in on my America (and perhaps other logs) will know that the frequency of my posting is quite idiosyncratic, so sorry about that....I'll try to be more diligent in the future!! hamilton
I said to my self, Don’t start another build until you finish the one you are working on. I just had to get it out of the box and put it on the bench. Just finished my Charles W Morgan Whaler and am still finishing up my New Bedford Whaleboat. But, I just had to stage my next build, The Maine Lobster Boat. It’s a 1979 Laughing Whale kit out of Wiscasset, Maine. Rescued this beauty on eBay. OK, I couldn’t leave it in the box. Had to lay it out... Maybe 🤔 I’ll just take a look at the instructions. Step one: assemble the Pre-cut pieces K-1, K-2, K-3 and stem into a Keel. 🧐 The pieces aren’t marked, this is like finding jigsaw pieces. 😆 (old school) Hand cut pieces require some sanding to allow effective glue joints. I chose CA Glue. Ok this is interesting, can’t stop now. Keel assembled, Step 1 completed. Step 2: Glueing the deck halves together. An hour in and I am reminding myself not to get started, I have a Whaleboat to finish. 😆 Too much fun... I’ll be back. 😎