Jump to content

Search the Community

Showing results for tags 'zeehaen'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


  • The Captain's Cabin
    • How to use the MSW forum
    • New member Introductions
  • Member's Build Logs
    • Build logs for SHIP MODEL KITS - by era - launch date
    • Build logs for SCRATCH projects - by era - launch date
  • Group Projects on MSW
    • Group Projects on Model Ship World
  • Shop Notes, Ship Modeling Tips, Techniques and Research
    • Nautical/Naval History
    • Discussions for Ships plans and Project Research. General research on specific vessels and ship types..
    • Building, Framing, Planking and plating a ships hull and deck
    • Discussion for a Ship's Deck Furniture, Guns, boats and other Fittings
    • Masting, rigging and sails
    • Model Tips and Tricks and Making Jigs
    • Modeling tools and Workshop Equipment
    • Metal Work, Soldering and Metal Fittings
    • Wood discussion...Where to use it? Where to get it? What types are best? How to Finish it?
    • Painting, finishing and weathering products and techniques
    • CAD and 3D Modelling/Drafting Plans with Software
    • Photographing your work. How to do this.
  • Ship Modeling News And Reviews.....Traders and Dealers...Ship Model Clubs
    • General Ship Model Kit Discussions - NOT build logs
    • Reviews
    • Book, Monograph and Magazine reviews and Downloads. Questions and Discussions for Books and Pubs
    • Traders, Dealers, Buying or Selling anything? - Discuss New Products and Ship Model Goodies here as well!!
    • NAUTICAL RESEARCH GUILD - News & Information
    • Important Ship Model Club News, Links to ship modelling resources and museums
  • The Crew's Lounge
    • Shore Leave
  • Medway Long Boat - 1742 - Public group project.'s Plans and Instructions/Downloads
  • Medway Long Boat - 1742 - Public group project.'s Medway Long Boat - 1742 - Public group project.
  • Medway Long Boat - 1742 - Public group project.'s General discussions/How to join
  • Rope Making/Ropewalks's Ropewalk Plans/Downloads
  • Rope Making/Ropewalks's Discussions about Rope Making
  • Rope Making/Ropewalks's Rope Materials and parts resources
  • Rope Making/Ropewalks's Commercial sources for ropewalk machines
  • Intro to carving - typical decorative relief carving for ship models's How to join this Carving Group
  • Intro to carving - typical decorative relief carving for ship models's Tutorials and Discussion for the Carving Group
  • Intro to carving - typical decorative relief carving for ship models's Build Logs for the Carving Group Project
  • HMS Triton - 28 gun frigate's Build Logs for the Full Hull Version of HMS TRITON
  • HMS Triton - 28 gun frigate's Cross Section Build Logs for HMS TRITON
  • HMS Triton - 28 gun frigate's How to Join The HMS TRITON Group Build
  • HMS Winchelsea 1764's General project discussions on planking, fittings and monograph chapters
  • HMS Winchelsea 1764's Member Build logs for the HMS Winchelsea
  • HMS Winchelsea 1764's How to join this group project???
  • Planking Techniques's Planking Downloads and Tutorials and Videos
  • Planking Techniques's Click Here for Topics dedicated to planking!!!!
  • HMS Granado 'Cross Section' - CAF Model's Questions and discussions about building the kit
  • HMS Granado 'Cross Section' - CAF Model's Build Logs for the CAF Granado Cross MID-Section


There are no results to display.

There are no results to display.

Find results in...

Find results that contain...

Date Created

  • Start


Last Updated

  • Start


Filter by number of...


  • Start





Website URL







NRG Membership Number

Found 4 results

  1. For my next build which is the Zeehaen 1639, a Dutch fluit used by the Dutch explorer Abel Tasman. But first some historical background information of a Fluit. Shipbuilders, skippers and other curious people, from near and from far, travelled to Hoorn in Noord Holland to look at the new ship. A prominent merchant, Pieter Janszoon Liorne, had turned his view of the ideal merchant vessel into reality. By the end of the sixteenth century there existed a ship type called a fluit, which had some specific characteristics. Seen from the side a fluit looks just like any old three-masted sailing ship. The mainmast and the foremast have square sails and the aftermost mizzenmast has a triangular lateen-sail occasionally supplemented with some smaller sails on the bowsprit and mizzenmast. The particularities of the fluit’s hull become apparent when seen from above or from astern. From above the outline of the hull appears as a rectangle box with slightly rounded corners. Seen in cross section the sides of the hull slope inwards, so-called ‘tumble-home’, which result in very narrow upper works. The rounded lower parts of the stern are crowned by a narrow flat transom, giving it a pronounced pear-shape. It might be that this shape, which stern-on gave the impression that the after works looked something like a thinly shaped glass, a flute, is the origin of the name. The Dutch fluit was a classic merchant ship of the 17th century. It was built to be economical in operation, carrying the largest cargo and smallest crew possible. The rigging was designed to be sailed and operated with proportionally small crews (12 to 13) , and its narrow upper deck was designed to evade Danish customs dues when passing through the sound in to the Baltic, where duties were levied according to the size of the breadth of the deck. There are several reasons for building a hull of this shape. Keeping the center of gravity low is perhaps the most obvious. The idea that the hull shape of the fluit was adjusted to cut costs probably derives from the general reputation of the Dutch merchants at the time. Creating a ship type that kept costs to a minimum becomes just another way to confirm their superiority and skill when it came to making profit. The fluit was a total success. From the end of the 16th century to the mid 18th century fluits were amongst the most common type of merchant vessels in Northern Europe and the Baltic Sea. In the Dutch Golden Age, 80% of the ocean going vessels were fluits and were built at an average of 400 to 500 annually. They were easy and cheap to build thanks to standardization of design as well as a technological improvements, such as the sawmill, which was invented by the Dutch. The fluit was a ‘multi-purpose’ vessel, a ship that with slight adjustments could meet a wide range of demands. Even if the term embraces a range of ships which share some important characteristics, there are variations with important differences. The size of fluits varied considerably. The smallest versions, sometimes referred to as the boot, were 86 feet at most (around 24m), whereas the largest versions were 140 feet (just over 39 m) and larger. Variations of the basic concept did not only affect the size, but included some special features connected to the trades in which these ships were used. Noortsvaarders or Houthaalders - Woodhauler was developed with ports in the bow and stern for loading long beams and timbers, They were of about 300-350 tons, with simple hulls and an armament of small guns. Ostervaarders, especially designed for the shallow harbours of the Baltic Sea. Fransvaerders, Spaensvaerders and the Straetsvaerders, so called because they were used in the trade with France, Portugal or Spain and the Mediterranean (through the straits). From the exterior, they differed from the other varieties through the beakhead The Vereenigde Oost-Indische Compagnie, VOC, (United East India Company), employed a number of fluits. Fluits were also used as whalers which are easy to distinguish in depictions as they have davits on the sides for lifting whaling boats. Next, a biography about Abel Tasman Marcus
  2. Hello Everyone. I recently decided that for my next model I wanted to build a Dutch Fluyt, specifically Abel Tasman's ship the Zeehaen. During my research into this topic I have come across two books and sets of plans that look quite promising. These are: The Ships of Abel Tasman Author(s): Ab Hoving & Cor Emke, introduction by Peter Sigmond Year: 2000 Publisher: Verloren ISBN: 9065500871 Pages: 144 pages Plans: 40 sheets of plans and CD-ROM for the Zeehaen and Heemskerck 17th Century Dutch Merchant Ships Aurthor(s): Ab Hoving, Plans by Cor Emke Year: 2014 Publisher: SeaWatch Books ISBN: 9780990404118 Pages: 152 Plans: 24 sheets of plans for 10 different ship types. I have already seen Marc's (flying_dutchman2) review of these two books and plans on Model Ship World, which can be found in the links below: 17th Century Merchant Ships The Ships of Abel Tasman I was wondering however if anyone could enlighten me as to any differences between these two books and their coverage of the Zeehaen? I would prefer to purchase 17th Century Dutch Merchants Ships as I certainly wouldn't mind the additional ships, however if it's coverage is significantly less detailed than the Ships of Abel Tasman then obviously I'd prefer the latter. Thanks
  3. Hello everyone! This is my first build log for ship-model building, The Zeehaen, a 17th century dutch merchant ship. The primary references is 17th CENTURY DUTCH MERCHANT SHIPS(by Ab Hoving) and Shipbuilding in the Dutch Golden Age. The reason for choosing zeehaen is it seems simple but a bit special, and the carving patterns are relatively simple for me to practice. Cor Emke's plans are not suitable for a full frame ship model, but I like some challenging making, although I find I think too simple at first- my 3D building process seemed to hit a brick wall, I can't get any reliable reference of internal structure on the stem and stern. so I finally changed my mind and took Mike Y's advice- start my log while the project is not yet completed. Perhaps someone can provide more accurate internal structural drawings to correct my mistakes, in addition, I also make a presentation of my making methods- Almost all parts were designed by 2D/3D and output to CNC processing. This is current progress The frames from k#-35# using 2D cutting Assembly process Keel and some special-shaped parts using CNC double-sided milling processing The "V slot" was processed directly by CNC. even so tiny parts were processed by CNC The Building jig This kind of jig is recommended by my friend, wangshuoliurui,as a senior shipmodel builder in china. I think this kind of jig is more suitable for those hull in 17th Century. Some experiments of figurehead or figurine carving patterns were designed by 3d and processed by multi-axial CNC . 3Dmodel was build by rhino, This requires accurate size. Convert the model into polygon format output to zbrush and sculpt it by virtual technology CNC programming and machining.
  4. Title: The Ships of Abel Tasman Author(s): Ab Hoving & Cor Emke with an introduction by Peter Sigmond Year: 2000 Publisher: Verloren, Hilversum, The Netherlands Language: English Edition: First ISBN: 90-6550-087-1 Pages: 144 Book Type: Softcover Extra: This box contains a book (Dutch, English or German), 40 printed drawings scale 1:75 and a cd-rom. The cd-rom includes Plans for both the Heemskerck - yacht and the Zeehaen - fluit for the following metric scales: 1:50, 1:87.5, 1:100 and 1:150. The plans are in HPLT format. Any decent CAD app. can read this. I use TurboCAD Deluxe 20 and it reads it well. The cd-rom also includes tabels in Microsoft Excel for Every measurement in Every scale and lots of pictures of the model, paintings of these types of ships and maps. Summary: As described in his preserved extract-journal, Abel Tasman had two ships under his command during his memorable voyage to the mysterious 'Southland' in 1642: the yacht 'Heemskerck' and the fluyt 'Zeehaen'. According to historian Peter Sigmond, head of the department of Dutch History of the Amsterdam Rijksmuseum, these ships can be placed in the same rank as ships like the 'Santa Maria', the 'Golden Hind' and the 'Endeavour'. Ab Hoving, head of the restoration department working for Sigmond, built models of these ships. Cor Emke has recorded the entire (experimental) building process on cad drawings. These drawings are not only printed but also recorded on cd-rom. This cd-rom enables the model builder to examine and print each part of the ship in a scale selected by himself. In the book to which the cd-rom belongs, Peter Sigmond describes the historical background of Tasman's expedition. Original illustrations from Tasman's journal, and paintings and pictures of yachts and fluyts illustrate the narrative. The book also offers an analysis of seventeenth-century shipbuilding; an account of how the models were built; a typology of the ships Tasman sailed with and a lot of information from which anyone interested can make his own choice in order to construct his model. My Personal Interest. Some of the modelers in this site know that my interests is in Dutch ships, preferably VOC and flat & round bottom boats. For a couple of years I have been looking for boats to scratch built. To start with I am going to built the Statenjacht "Utrecht". From there on I wanted something larger, challenging and historical. As I read anything about the VOC I have been reading a lot about Australia (Anthony van Diemens landt), New Zealand (Named after the Dutch Provence Zeeland) and Tasmania (last name of the explorer). So decided that the Ships of Abel Tasman would be a challenge and different. (I enjoy building boats that very few people built). I had difficulty obtaining the book, but found out that a member of my local nautical club, Bob F., had the book in possession and was willing to part with it. Purchased the book and have been reading it and studying the plans. The printed plans in the book are in scale 1:75 which is of a good size. If I am energetic enough I may do the boats in scale 1:50. I plan to do the jacht 'Heemskerck' first and when I have more experience with building do the fluit 'Zeehaen' last. The fluit looks so odd to me. Small waist (deck), big buttom (hull). Pear shaped boat with a large cargo bay near the waterline and a narrow deck. For the members of this site that do not know what the purpose of a fluit was is the following: The Dutch had to pay high taxes to Denmark which was assessed based on the area of the main deck and this is how the fluit came about. It was not built for conversion in wartime to a warship, so it was cheaper to build and carried twice the cargo, and could be handled by a smaller crew. Minimized or completely eliminated its armaments to maximize available cargo space. Construction by specialized shipyards using new tools made it half the cost of rival ships. These factors combined to sharply lower the cost of transportation for Dutch merchants, giving them a major competitive advantage. Another advantage was a shallow draft which allowed the vessel to bring cargo in and out of ports and down rivers that other vessels couldn't reach. The fluit gained such popularity that English merchants build similar looking ships. Here is a link of a person in Germany that built the Zeehaen. Excellent built. http://www.modelships.de/Fluyt-Zeehaen/Photos-ship-model-fluyt-Zeehaen_details.htm Thank you for reading. Marc
  • Create New...