cabrapente Posted March 6, 2013 Author Share #31 Posted March 6, 2013 him out of the stands. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #32 Posted March 7, 2013 I put the sleeping forecastle. tapes as ebony, split when bent. the center as I did very fine work. but both thicker, I can not. Is it better to do them in another timber and then paint them? or did you do it for pieces? Thank you. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #33 Posted March 7, 2013 tapes as ebony, split when bent. the center as I did very fine work. but both thicker, I can not. Is it better to do them in another timber and then paint them? or did you do it for pieces? Thank you. I used the first frames that did not match to make the aft ligations Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #34 Posted March 7, 2013 the frame # 10, does not match bien.creo the fault has been on the rise, with respect to the keel. I have cut in half, and I have placed a new one. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #35 Posted March 7, 2013 the frame # 10, does not match bien.creo the fault has been on the rise, with respect to the keel. I have cut in half, and I have placed a new one. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #36 Posted March 7, 2013 the frame # 10, does not match bien.creo the fault has been on the rise, with respect to the keel. I have cut in half, and I have placed a new one. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #37 Posted March 7, 2013 I finished sanding the hawse. I put the above keel Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #38 Posted March 7, 2013 for if he forgot the triangular massif, which runs between the last rib and the stern ... Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #39 Posted March 7, 2013 then I removed the hand drill, and put it in the electric. works perfect, and I can put half millimeter bits as ebony tapes are very irregular, but I could not get equal strips. the remnants, are many, but poorly usable. although the photos, they look good ... Archi 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #40 Posted March 7, 2013 Castle sleepers Archi 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #41 Posted March 7, 2013 well then broke the two sheets of the band saw, and tried to make the figure of the mirror. faithfully tried to copy the picture. but even in pencil, on paper, could not. so I've done a bit modified. but I like how it looks. Mirabell61 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #42 Posted March 7, 2013 looking for a place to weld the sheets, I found a site where they are made. are larger and stronger, the cut is not as fine. but cut straight, fast, and I'm encantado.mucho better than the originals. best price ..... 7.50 euros each. have manufactured a tool, which serves to cut straight strips that do not have uniform edge. Basically, they are a couple of tables guide, with four screws, imprison within the ribbon cutting. to see the reference line to the table above, I made notches, through which you can see and align the ribbon. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #43 Posted March 7, 2013 Today started lining inside. I find it hard. and do not see it very clear Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #44 Posted March 7, 2013 continue to gradually lined. I built a cold bending strakes. I came to see a device that crushes lemons, to prepare caipirinha. I've done testing, work well. this is oak, and very wide. curve less, but the good side does not suffer. ronkh 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #45 Posted March 7, 2013 I tested with different woods. all functions. even ebony. this is oak, with a greater thickness. more breaks, but outside is fine. Archi 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #46 Posted March 7, 2013 lining. Archi 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #47 Posted March 7, 2013 I start the shell with cherry. curving strake is a great invention. dry, and in less than a minute, you get the curve to give the strake. seriously awesome. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #48 Posted March 7, 2013 to see if anyone can give me advice. strakes as I can not brush them with the thicknesser, for being very thin, I'm standing with cutting band saw. let thick with many changes. inside, I put wooden nails (hygienic chopsticks), but they are too fat, and ugly. so I bought copper nails and bronze color and a nail is driven. but to sand them, change the color of iron, and bulk changes if you lose your head. if the strakes amount without nails and lijo all, where would the nails, how do you do? Thank you. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #49 Posted March 7, 2013 Good afternoon, I have not touched the boat. but I rapasado all strakes, iroko, cedar, oak and cherry. I've changed the sand twice. but it was too much. I could pull the nails, with just damage. Archi 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #50 Posted March 7, 2013 The colored lines were because I was wrong, and to start over, change color. and no one can see clear no (heh heh heh) Now do the strakes to calculate, and copy the opposite. pins, are steel. but when I'm removing the glue dry, and after the sanding, the compressor and blow the holes are back. then I'll put the final nails. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #51 Posted March 7, 2013 overview Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #52 Posted March 7, 2013 Anyone can guide me? I have fear of damaging it while I finish it. What do you do when you finish the hull sanding, wax, oil, varnish, ...? thanks Archi 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #53 Posted March 7, 2013 was just 4 brass rods, and the starboard side, I spent three and a half. while I buy more, I've messed with the stern. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #54 Posted March 7, 2013 I start with the beams. Archi 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #55 Posted March 7, 2013 and are all the bars baos.faltan aft castle. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #56 Posted March 7, 2013 December 26 2010.felices holidays to all. Archi 1 Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #57 Posted March 7, 2013 notches to cover, I was afraid. but I found it easy. Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 7, 2013 Author Share #58 Posted March 7, 2013 more Archi and Wishmaster 2 Quote Link to comment Share on other sites More sharing options...
richardt Posted March 8, 2013 Share #59 Posted March 8, 2013 Hi cabrapente, I think your troubles started when you glued your templates to the planks. If you rub your glue stick onto the paper template it can distort the template and any distortion will be transferred to the part when you cut it out. What I do is rub the glue stick on the plank and then carefully place the template onto the glue. Then put a piece of scrap paper over the template and then gently press it down. When it is properly in place, carefully remove the scrap paper and your template will be perfect. Instead of sticking the template on the wood, you are rather sticking the wood on the template. Before gluing the futtocks together, first compare everything against the plans and make sure that the butt ends are square and the parts follow the hull curve properly. I'm sure that you will still end up with a nice hull with careful sanding but it can be done without sweat and tears. Cheers, Richard Quote Link to comment Share on other sites More sharing options...
cabrapente Posted March 10, 2013 Author Share #60 Posted March 10, 2013 Hi cabrapente, I think your troubles started when you glued your templates to the planks. If you rub your glue stick onto the paper template it can distort the template and any distortion will be transferred to the part when you cut it out. What I do is rub the glue stick on the plank and then carefully place the template onto the glue. Then put a piece of scrap paper over the template and then gently press it down. When it is properly in place, carefully remove the scrap paper and your template will be perfect. Instead of sticking the template on the wood, you are rather sticking the wood on the template. Before gluing the futtocks together, first compare everything against the plans and make sure that the butt ends are square and the parts follow the hull curve properly. I'm sure that you will still end up with a nice hull with careful sanding but it can be done without sweat and tears. Cheers, Richard thank you very much for your help Richart. this occurred in January 2011 la belle, the finished failing to put the candles. I am copying the record, with all the problems I had already had it in another forum. cabrapente greetings Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.