Jump to content
archjofo

La Créole 1827 by archjofo - Scale 1/48 - French corvette

Recommended Posts

8 hours ago, archjofo said:

Hi Bob,

Thank you very much for pointing out this tiny detail.
Since the hooks are very small, it will be very difficult to do it properly.

So I do not know yet if I'll do it.


Johann,

Seeing your fine execution of details, I have no doubt you could replicate the mousing. I was noticing the same thing, but Bob was quicker to comment. 
 

Below is my amateurish and feeble attempt at the same scale on a long boat.  I’m sure yours would be much better. 
 

cheers

 

 

C0C1C05C-4D92-44F8-965A-110AFC995DE2.thumb.jpeg.4355783bf9bc2d0376603c917531c3fe.jpeg

Share this post


Link to post
Share on other sites

Hi,
for the many nice comments, I thank you very much. It is a real pleasure to receive such a recognition. That encourages me to continue like this.
Also for the many LIKES a big thank you.

 

Continuation: Guide blocks inside the bulwark
In addition to double blocks, a series of single and triple blocks must also be made as guide blocks for the bulwark. In contrast to the large single blocks with iron fittings (length 6.8 mm in the scale 1:48), the simple blocks with strops are much smaller copies with only 4.3 mm in length. That does not make splicing much easier. In this respect, the short splices are not as uniform as they have already seen.
DSC04336_wett.jpg.564864dfa99d5d6fc2b8dbbd22c19021.jpg 
The next picture shows a single block in size comparison to a cent coin.
DSC04337_wett.jpg.b033fb6a1adfaca0044c8e520c0a2e5a.jpg 
Sequel follows …

Share this post


Link to post
Share on other sites

Johann,

 

Indeed stunning work. Beyond anything that I will (most of us?) see in this "hobby". I was laughing, in kindness, my work, by comparison, is from a Lagos box --- haha :imNotWorthy:

I have learned so much from just following your work - Thank you !

 

Sincerely,

Edited by md1400cs

Share this post


Link to post
Share on other sites

Hello friends of model making,
another year has passed and you followed my project with interest. Therefore I would like to thank everyone warmly. With new energy and motivation, I hope we will continue to enjoy our hobby a lot.


Merry Christmas and good wishes for the coming year.

20190412_155157.thumb.jpg.e8773b8447ccc79f8d39fe23a3a99d46.jpg

Share this post


Link to post
Share on other sites

Hello,

before I attach the ratlines, I have to install the rope ladders in the bulwark area. There are two ladders per mast, one on the starboard side and the other on the port side.

Here is a photo excerpt of the Parisian model of  La Créole: 

MMP-13.jpg.1111f4cc7a0b7c12cb3c42f0c338b00b.jpg

Quelle: Musée de la Marine Paris – La Crèole


The design on the Parisian model is probably not entirely based on the original, as the following photos from this era show.

3559-001-web.jpg.6f0a205f2fee46b49692f54381d2bb62.jpgmarine-francaise-copie.jpg.e1c8f0135b384bb6b54afdd1723bd6b9.jpg
Therefore I believe that the rung goes through the rope and secured with a rope binding, as can be seen in the following picture.
Echelle_en_cordage.jpg.0f4d4f6df03313bd5708829ce9881030.jpg
Who can give me more information about this?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...