Jump to content
Jolley Roger

Mayflower by Jolley Roger - Artesania Latina - 1/64

Recommended Posts

I have started this model a couple of years ago, but being my first attempt, realized that I was way out of my depth.

 

I then put the build on hold and decided to try something simpler to develop my skills and try again.

 

I have since completed the basic AL Mare Nostrum (loaded the pics in the Gallery), which taught me enough to build up the courage to try my hand at the Mayflower again.

 

I have to say that the planking and other tutorials and knowledge on MSW(1 and 2) has been a tremendous aid in teaching me the basic skills.

 

Thank you MSW!

 

So this is where it is at the moment, I have put the bulkheads and keel together, decided to add extra balsa wood spacers between the bulkheads, as they felt a bit wobbly.

 

The false decking has been installed, but the Ramin planks supplied for decking, is in my opinion, crap! Way to brittle and it does not sand to a smooth finish. Not sure if anybody else have had the same problems with Ramin, but I decided to replace it with Maple, so i'm waiting for delivery from Cornwall Model Boats.

Since i'm living in the good old South Africa, this can take a while!

post-19243-0-75297800-1433508113_thumb.jpg

post-19243-0-07521300-1433508206_thumb.jpg

Share this post


Link to post
Share on other sites

So in the mean time back at the ranch....

 

I have decided to try my hand in scratch building the ships launch(if that is the correct term?), as the metal 'thing' supplied by AL does not look good.

 

Got the plans from the Swedish Maritime Museum site, it might not be 100% historically accurate, but i'm hoping its going to look better than the AL offering.

post-19243-0-08831200-1433509865_thumb.jpg

post-19243-0-55594400-1433509869_thumb.jpg

post-19243-0-77456900-1433509873_thumb.jpg

Share this post


Link to post
Share on other sites

The bulwarks have been planked and bent.  

 

I can't install them yet, because i'm still waiting for some maple decking planks, from CMB, to be delivered.

 

I ordered the planks on 19 May! Not CMB's fault, the customs and postal services over here is just pathetic.

 

The admiral received a package about two weeks ago that was posted August last year!

post-19243-0-01294000-1437380330_thumb.jpg

post-19243-0-37244100-1437380340_thumb.jpg

Share this post


Link to post
Share on other sites

Oops! see I have lost a little hinge on the door there... will have to make a replacement tonight, as the carpet monster probably got it.

 

Fillers added to the bow and stern and first layer of planking started.

 

I wanted to install the bulwarks before I started the planking, but can't wait for the deck planking any longer!

 

The fillers are not the most elegant looking, I just used some scrap balsa to fill the gaps, but it will do the job.

post-19243-0-23708400-1437381078_thumb.jpg

post-19243-0-84252600-1437381086_thumb.jpg

Share this post


Link to post
Share on other sites

Decking time! 

 

It's been a while, had to wait months for some replacement timber due to a postal strike and then went on vacation in between as well. At least I had the privilege of visiting the Vasa in Stockholm and the Viking ship museum in Oslo, very good motivation!

 

I have decided to replace the AL supplied Ramin planking(top), with some Maple(bottom) supplied by Cornwall Model Boats.

 

As you can see, there is remarkable difference in the quality.

 

post-19243-0-32250900-1446370413_thumb.jpg

 

Since there is no spesific record of how decks were planked for this period, I have decided on a 13524 pattern, as described in NRG's ship modelling database.

 

I am very satisfied with the results. A couple of mistakes here and there, but it's all part of the learning curve.

 

post-19243-0-12780100-1446370271_thumb.jpg

 

 

Share this post


Link to post
Share on other sites

Looks good, I replaced almost all the kit wood on mine so far some of it for lack of quality but mostly for looks. Great Job

Share this post


Link to post
Share on other sites

Hull planking done! ......finally. She is starting to look the part, hopefully I can turn this ugly duckling into a swan...

 

I tried spiling for the first time, using Mahogany veneer, which is a slightly different and a lighter color from the kit supplied Mahogany.

 

I will give the lighter parts an extra covering of sealer, to see if i can get it to match the rest of the planking.

post-19243-0-73524300-1453103754_thumb.jpg

Share this post


Link to post
Share on other sites

The kit impression of the windows in the stern was not to my liking

post-19243-0-64898300-1453104608_thumb.jpg

 

So i decided to make a new one using oak veneer for the frames, paper painted aluminium to simulate lead and Micro Kristal Klear to form the glass.

 

post-19243-0-26484300-1453105293_thumb.jpg

 

Here it is dry fitted to the stern, it's not perfect, but i'm happy with the result.

Share this post


Link to post
Share on other sites

Painting time!

 

First a coat of grey primer to see if there is any serious dents or bumps to be sanded smooth.

 

post-19243-0-76416500-1454314559_thumb.jpg

 

Then a coat of white. I just used some Rustoleum Ultra Cover, as I want a tough covering that wont damage easily.

 

post-19243-0-92609600-1454314966_thumb.jpg

 

Now it's time for some serious masking and airbrushing, as there is some intricate patterns in this build.

 

Hopefully i'll have the masking done by the end of the week and I can finish the painting over the weekend - weather permitting.

 

Share this post


Link to post
Share on other sites

Well, the painting is finally finished! 

Definitely not my favorite part of the build, but I wanted it to look as good as possible, so I spent a lot of time on it. 

 

post-19243-0-66656000-1457964309_thumb.jpg

 

I also decided to change the bulkhead from mahogany to cherry wood. I made the little window with lead wire and Microscale Kristal Klear

 

post-19243-0-56180500-1457964537_thumb.jpg

post-19243-0-36355300-1457964548_thumb.jpg

 

...and last, but not least, I am attempting my hand at treenailing the deck. I still need some fine tuning on the technique, but it looks alright for a first attempt. (i still need to finish the set on the right, just need to pull more bamboo through the drawplate!)

 

post-19243-0-26444900-1457964676_thumb.jpg

Share this post


Link to post
Share on other sites
On 10/13/2018 at 2:44 AM, Osmosis said:

I have this kit also and don't feel I am quite up to it yet. Yours is coming along very nicely mind if I pull up a chair?

 

Regards

Welcome aboard sir, welcome aboard!

 

Funny that you came across my build this weekend, as I just opened the new shipyard on Saturday!(the admiral calls it the corner of chaos?!)

In between studying, moving, renovating and some damage due to the move, the Mayflower has been sadly neglected.

As you can see at the bottom photo, she is minus a beakhead again, due to a 'small' incident during the move, the hull has also sprung a couple of leaks(cracks) which I will fix in due course.

After the fix, I plan on fitting the rudder, I see my metal bending abilities will be tested soon!788607662_20181007_085442(1280x960).thumb.jpg.cf6132ab7755adeddef703652e25784f.jpg692672836_20181007_085513(1280x958).thumb.jpg.530b9ee35c0482bb3a4b222f328fc9c5.jpg370746535_20181007_085642(1280x954).thumb.jpg.021ae1356fafc04f271c24139bc119ee.jpg

Share this post


Link to post
Share on other sites

Wow, In my excitement to find a build log on this kit I did not notice the date on the last post. I would very much appreciate it if you dropped everything else and got back to work on it. Just kidding of course. I just got back to model building after an eight month layoff myself. Life has a habit of intruding on our passion every now and then.

 

Best Regards

Share this post


Link to post
Share on other sites

So I finally got time to work on my Mayflower again! 

I got a double hernia repair surgery done and the bonus is i got two weeks recovery time(aka ship model time)

Double bonus: I get to wear very stylish graduated compression stockings for a month

7303391_20181104_162719(1280x960).thumb.jpg.ee1e6be7d60ab12a8b1c8afc423cd754.jpg

I made a quick jig out of scrap wood so these(described as deck fittings?) will look similar

1838382391_20181104_061839(936x1280).thumb.jpg.733180937c836324c37d12d0215fc95b.jpg

and installed

1435328385_20181104_162625(1280x954).thumb.jpg.2f0b4bedd545d0fd10cdb7af2d11841e.jpg

Also started installing the gudgeon/pintle(not sure which is which) for the rudder attachment.

1043124312_20181104_062246(949x1280).thumb.jpg.7057f8042682c00f39dcfa9d12ade4c5.jpg

Share this post


Link to post
Share on other sites

Finally some more progress!

I'm great at procrastinating, sitting in front of my model, thinking of what needs to be done, ending up doing nothing :(

 

Beakhead reattached and completed, hand rails added 308350780_697B2449(1024x683).jpg.09b3da3383ee2e8c6860bf0c21869d08.jpg

Anchor davits and pin rails added

1123945511_697B2447(1024x683).thumb.jpg.8f6c2b28a53db9a7d8d6beb16ab77ea2.jpg

I've embedded the pin rack balusters into the deck to avoid knocking them over. It seems i get clumsier the closer I get to a ship model!163712800_697B2421(1024x683).jpg.0183d81f6706ba4ff28e5bb1b6431099.jpg

Got one ladder done, a couple more to go...

697B2425.thumb.JPG.94003f299fdd9142a6afaa3d36f57ca8.JPG

Started working on the cannons, they seem a bit over sized for the gun carriages. I only need to do four, hats of to the guys doing a ship of the line.714684074_697B2444(1024x791).thumb.jpg.55ba5971dbfa49f4b62713d1fc8572b9.jpg 

Share this post


Link to post
Share on other sites

awesome pics. i'm currently building the same model, but i at a stand still with the rigging of the foremast backstays...i'm not sure where they attach on top of the mast?? any input would be greatly appreciated!!

 

Thanks

Share this post


Link to post
Share on other sites

Aim High, if I remember correctly it should be connected with an eyesplice dropped over the masthead, the same way the shrouds are connected.

The more knowledgeable guys on the forum should be able to give you a much better explanation, what I know of rigging at the moment is dangerous!;)

Share this post


Link to post
Share on other sites
On 1/9/2019 at 10:53 PM, Jolley Roger said:

I'm great at procrastinating, sitting in front of my model, thinking of what needs to be done, ending up doing nothing :(

 

Don't feel like the lone ranger,  I do it all the time............. seem's like.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...