Jump to content

Charles W Morgan by jwvolz - Model Shipways - 1:64


Recommended Posts

Officially got the Morgan under way a few days ago. I really should be working on a case for my Bomb Vessel Granado, but I was tempted...

 

post-11003-0-35557500-1435106341_thumb.jpg

 

I hope everyone enjoys the ride here. I'm really looking forward to this build as something a bit different, since my last four builds were all warships. 

 

I won't get into much about the kit itself, since it is fairly well known. I have yet to fully evaluate what I'm going to keep and what I'm going to discard with regard to the kit pieces, in particular some of the Britannia castings. The rope will definitely be replaced, and possibly the blocks and I will replace wood where needed to avoid things like splitting issues when drilling basswood. Most wood will be painted, which is quite a contrast from the Granado build. 

 

The bulkheads have been cut out and cleaned up, which was a pain since they are plywood. A hobby knife struggles, but the laser cuts are too narrow to fit even tiny xacto saw blades. 

 

Moving on, I've cut the rabbet/bearding line, using a compass to get the line, and a copied paper template from the plans for the bearding line. The basswood keel was much easier to work with than the ply bulkheads...

 

post-11003-0-43301900-1435106342_thumb.jpg

 

post-11003-0-03309600-1435106343_thumb.jpg

 

post-11003-0-04066800-1435106344_thumb.jpg

 

post-11003-0-16993500-1435106345_thumb.jpg

 

 

Joe Volz

 

 

Current build:

Model Shipways "Benjamin W. Latham"

 

 

Completed  builds on MSW:

Caldercraft HMS "Cruizer   Caldercraft HMBV "Granado"   Model Shipways "Prince De Neufchatel"

 

 

 

 

Link to comment
Share on other sites

Link to comment
Share on other sites

Nice start Joe.  Interesting to see the difference between basswood and the plywood keel formers, Can only imagine how much easier it is to work with.

Cheers,
 
Jason


"Which it will be ready when it is ready!"
 
In the shipyard:

HMS Jason (c.1794: Artois Class 38 gun frigate)

Queen Anne Royal Barge (c.1700)

Finished:

HMS Snake (c.1797: Cruizer Class, ship rigged sloop)

Link to comment
Share on other sites

Subscribed.  This is going to be awesome.  I have the CWM on my shelf and will be following your log.  No pressure :)

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Hey There Joe.. Thanks for the link (on your Granado Log) over to here.. Am looking forward to another one of your class builds..  So as Mike above says 'No Pressure'   ^_^  ^_^

 

All The Best

 

Eamonn

Current Build   :  HM Schooner Ballahoo

In the Pipeline :  HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄

Link to comment
Share on other sites

Hi Joe,

 

wishing you a most enjoyable build with this famous "whaling mothership",

shall watch this interesting log....

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

  • 1 month later...

Hi Joe, just found your log. Glad to see you joining the "Morgan Club". I have a lot of photos as well as a build log here on MSW. should you need any reference photos please check my website as I have them posted there. I'll enjoy following your log --- it brings back memories of when I was at this stage. I'm almost finished with mine probably around 95%. It's a fun build.

John

 

http://www.charleswmorganmodel.com

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

Thanks John. I've done nothing on the Morgan for a number of weeks, as I'm busy with outdoor activities while the weather is good. Hope to resume in the Fall. 

Joe Volz

 

 

Current build:

Model Shipways "Benjamin W. Latham"

 

 

Completed  builds on MSW:

Caldercraft HMS "Cruizer   Caldercraft HMBV "Granado"   Model Shipways "Prince De Neufchatel"

 

 

 

 

Link to comment
Share on other sites

  • 2 weeks later...

Hi Joe, just an FYI I was just visiting the Morgan yesterday and took over 400 more pictures. I'll be posting them on my website in the next few days as internet connections allow. they will be in the gallery section under the Morgan. I will possibly make another page for them. Check it out if you need anything or PM me and I'll provide you with pictures. Look forward to you getting back into building again.

John

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

  • 5 months later...

Well, I haven't posted anything in here for quite sometime.  I am waiting for some replacement parts from ME to fix a major screw-up with the Morgan. I am finally motivated to try to save it.  We shall see how that works out...

 

Meanwhile, I realized that I never posted any photos of the Granado in her case. The base is a piece of oak plywood. I routed a lip around the edge to accommodate the acrylic case, and finished the outer edge with oak molding from Lowe's. The acrylic portion was made by a plastics company in Philadelphia, and cost me about $220. They did a real nice job on it and I will use them again. I got a local trophy retailer to make the brass nameplate: a mere $5.00.

 

Overall I'm very pleased with how it came out. 

 

 

 

 

post-11003-0-84059800-1454642921_thumb.jpg

post-11003-0-62950400-1454642922_thumb.jpg

post-11003-0-44543400-1454642923_thumb.jpg

Joe Volz

 

 

Current build:

Model Shipways "Benjamin W. Latham"

 

 

Completed  builds on MSW:

Caldercraft HMS "Cruizer   Caldercraft HMBV "Granado"   Model Shipways "Prince De Neufchatel"

 

 

 

 

Link to comment
Share on other sites

That came out really nicely Joe, congratulations on a fantastic build!

 

Looking forward to seeing you restart your Morgan :)

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Joe, it's all correctable....look forward to seeing your progress..

John

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

Thanks guys.

 

John: Yeah,  I know I can fix it, just wasn't motivated to do so for quite a long time. I have a plan, and at this point I just need my replacement parts from Expo to arrive. 

Joe Volz

 

 

Current build:

Model Shipways "Benjamin W. Latham"

 

 

Completed  builds on MSW:

Caldercraft HMS "Cruizer   Caldercraft HMBV "Granado"   Model Shipways "Prince De Neufchatel"

 

 

 

 

Link to comment
Share on other sites

Beautiful model and nice case  - - congrats !   Look forward to following along.

Edited by gerty

Current Build: Willie L. Bennett - Model Shipways

 

Future Interests:  Friendship Sloop - BlueJacket Ship Crafters

                            Cape Cod Catboat - BlueJacket Ship Crafters 

                       

Link to comment
Share on other sites

As I patiently wait for my replacement parts from Expo I decided to work on some deck structures to at least get something done. I've built the deck house and vegetable bin (a fiddly little thing) and painted those up. I also built the workbench, but am not 100% happy with it and will likely do it over (top is unfinished at the moment).

 

I can say after working with mostly boxwood on the Granado build I'm not happy being back on basswood for this one. There are absolutely some areas where I will substitute boxwood for strength, likely pin rails, fife rail and channels to name a few. Probably the skylight as well in order to be able to drill all the holes for the rods an not split the wood.  

 

John, your photos are coming in handy, thanks! I still need to stop by Mystic next time work takes me through the area. 

 

 

 

 

post-11003-0-41861100-1455639015_thumb.jpg

post-11003-0-94035900-1455639015_thumb.jpg

post-11003-0-48974000-1455639016_thumb.jpg

post-11003-0-92690900-1455639016_thumb.jpg

Joe Volz

 

 

Current build:

Model Shipways "Benjamin W. Latham"

 

 

Completed  builds on MSW:

Caldercraft HMS "Cruizer   Caldercraft HMBV "Granado"   Model Shipways "Prince De Neufchatel"

 

 

 

 

Link to comment
Share on other sites

Hi Joe, looking good.  Let me know if you need anything specific.  I agree on the hardwoods and would highly recommend them in the areas you mentioned.  Contact Jason at Crown Lumber and he'll get you what you need....you'll be a much happier camper!

John

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

  • 3 weeks later...

Well after waiting over a month my parts arrived from Model Expo like this:

 

post-11003-0-53477200-1457745742_thumb.jpg

 

They were packed in an envelope with two thin pieces of card stock. How could anyone possibly think that would survive the USPS?

 

Back it goes on the shelf. I may have another project in the works anyway soon. Very disappointing...

Edited by Joe V.

Joe Volz

 

 

Current build:

Model Shipways "Benjamin W. Latham"

 

 

Completed  builds on MSW:

Caldercraft HMS "Cruizer   Caldercraft HMBV "Granado"   Model Shipways "Prince De Neufchatel"

 

 

 

 

Link to comment
Share on other sites

Hi Joe, man that sucks. Sorry to see that - not much of an excuse is it? You could probably make those work, but it's your choice - don't let that discourage you since about 95% of this build is by scratch. You can probably glue the pieces together and really not know the difference. It get's real discouraging, and unfortunately reflects back on the company MS, not only time but frustration. Good luck with your choices on what to do next. Sorry again to see this...

John

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

Joe,

 

That is shocking. The packaging that you describe would not survive any postal service in the world.

Ian M.

 

Current build: HMS Unicorn  (1748) - Corel Kit

 

Advice from my Grandfather to me. The only people who don't make mistakes are those who stand back and watch. The trick is not to repeat the error. 

Link to comment
Share on other sites

Link to comment
Share on other sites

Thanks guys. It's really splintered up badly, and being relatively delicate I don't think it will glue up very well. 

 

I'm going to give myself a day or two to ponder my options. 

Joe Volz

 

 

Current build:

Model Shipways "Benjamin W. Latham"

 

 

Completed  builds on MSW:

Caldercraft HMS "Cruizer   Caldercraft HMBV "Granado"   Model Shipways "Prince De Neufchatel"

 

 

 

 

Link to comment
Share on other sites

Joe,  may I suggest that you send a PM to Marc Mosko (MMOSKO) here on MSW and tell him about the bad service - he had a lengthy discussion on his company here a while back and talked about his desire for customer satisfaction. Doesn't hurt to go to the top man. ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...