Jump to content

Rotary Cutter


Recommended Posts

Ran across an interesting tool in the fabric department and thought it might have some utility in our hobby.  It is a rotary cutter used by quilters and leather workers.  It has a handle and a round, rotating blade about an inch across.  The blade is very sharp and is used with a cutting mat for cutting out patterns.  I think it would work with wood veneer just fine.  Anyone used one of these and if so what is your impression.  This picture is one I found on Amazon.

post-321-0-24535400-1436127431.jpg

My advice and comments are always worth what you paid for them.

Link to comment
Share on other sites

I have 3 different sizes of Head Knifes. Have used them on thin wood placed on a mat, but  I have them to cut leather. Have seen those rotating blades advertized, the pizza cutter we have that is a similar design but larger blade works fine. With the head knife you could make straight cuts, circular cuts or sharp angle cuts easily. Might be worth looking at.

jud

Edited by shiloh
Link to comment
Share on other sites

I use them on fabric (sails, hammocks, etc). The advantage is that you cut the material while it is lying flat on the cutting board and you can see where the blade is going.

I have also used it to cut veneer. It is just like quilting.

post-246-0-15175900-1436287818_thumb.jpg

Edited by Modeler12

Jay

 

Current build Cross Section USS Constitution  http://modelshipworld.com/index.php/topic/10120-cross-section-forward-area-of-the-uss-constitution/

Finished USS Constitution:  http://modelshipworld.com/index.php?/topic/103-uss-constitution-by-modeler12/

 

'A picture is worth a  . . . . .'      More is better . . . .

Link to comment
Share on other sites

I was thinking about "borrowing" the Admirals cutter for sail material - as long as I use things for the same purpose she does, she is usually very understanding.  If I were to try that with wood veneer, however - watch out!

 

Bob

Current build -- MS Bluenose

Future build - MS Flying Fish

 

"A ship is safe in harbor, but that's not what ships are for." - William G. T. Shedd

Link to comment
Share on other sites

I did borrow my Admirals cutter and green cutting mat to cut some sails from a sail pattern. Worked like a charm - cuts smoothly and accurately like a hot knife through butter.  Great tool

Link to comment
Share on other sites

Replacement blades (2 per package) cost $4.50 to $5 depending on size at Joanne's sewing store.

I have sharpened the old one with limited success. Any nick on the edge causes hick-ups on the cut.

Jay

 

Current build Cross Section USS Constitution  http://modelshipworld.com/index.php/topic/10120-cross-section-forward-area-of-the-uss-constitution/

Finished USS Constitution:  http://modelshipworld.com/index.php?/topic/103-uss-constitution-by-modeler12/

 

'A picture is worth a  . . . . .'      More is better . . . .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...