antanasp Posted August 16, 2015 Share #1 Posted August 16, 2015 Hi, In some next weeks I'll must end the another boat build. This is very similar to the 75 mm boat, but the result is slightly different. Of course this is Master Korabel production. The boat are 20 mm longer, have more seats, more frames. But construction is the same as in 75 mm boat. So. I make a short build log. At the first - the kit content: Improved the temporary frames holder, sanded and glued the keel. Glued the last temporary frame in the place. Prepared and glued the temporary frames at the hull bow. And placed the remaining temporary frames in to the holder. When glued the keel. Regards, Antanas clearway, ccoyle, Omega1234 and 3 others 6 Quote ........................................................................................................................................................................................................................ Always can be done better, always can be done more! ........................................................................................................................................................................................................................ My builds: 1. 75 mm Boat - Master Korabel; 2. 95 mm Boat - Master Korabel; 3. Double boat - Master Korabel; Link to comment Share on other sites More sharing options...
Nirvana Posted August 16, 2015 Share #2 Posted August 16, 2015 Antanas, I guess this build will go a little faster for you. Again I will pull forward a chair to enjoy this build. antanasp and Omega1234 2 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
antanasp Posted August 22, 2015 Author Share #3 Posted August 22, 2015 Antanas, I guess this build will go a little faster for you. Again I will pull forward a chair to enjoy this build. In my opinion, it will also be faster. After the week delay, tommorow it will be continued. Regards, Antanas Quote ........................................................................................................................................................................................................................ Always can be done better, always can be done more! ........................................................................................................................................................................................................................ My builds: 1. 75 mm Boat - Master Korabel; 2. 95 mm Boat - Master Korabel; 3. Double boat - Master Korabel; Link to comment Share on other sites More sharing options...
antanasp Posted August 23, 2015 Author Share #4 Posted August 23, 2015 Bended and glued frames. They are from the pear strips. And begin planking the hull. The second and third frame has a wrong shape... Or maybe I make some mistake. Between frame and the plank are the small gap. But this is not the big problem. Some amount of the glue repaired this. The next problem is the first plank lenght. The lenght is about 0,1 mm less then needed. Regards, Antanas Mike Y, IgorSky, clearway and 2 others 5 Quote ........................................................................................................................................................................................................................ Always can be done better, always can be done more! ........................................................................................................................................................................................................................ My builds: 1. 75 mm Boat - Master Korabel; 2. 95 mm Boat - Master Korabel; 3. Double boat - Master Korabel; Link to comment Share on other sites More sharing options...
antanasp Posted August 26, 2015 Author Share #5 Posted August 26, 2015 After sanding prepared and glued inside seats and other elements. This is easy. Painted in black some other pieces. Result today. Regards, Antanas IgorSky, GuntherMT and gieb8688 3 Quote ........................................................................................................................................................................................................................ Always can be done better, always can be done more! ........................................................................................................................................................................................................................ My builds: 1. 75 mm Boat - Master Korabel; 2. 95 mm Boat - Master Korabel; 3. Double boat - Master Korabel; Link to comment Share on other sites More sharing options...
GuntherMT Posted August 26, 2015 Share #6 Posted August 26, 2015 These Master Korabel kits seem to build into really fantastic little boats. Thanks for posting these logs, they are great, and your boat is looking awesome. clearway, ccoyle and antanasp 3 Quote Brian Mystery project coming soon! Current build - Medway Longboat Complete - Armed Virginia Sloop Complete - Carmen (First Build) Link to comment Share on other sites More sharing options...
ccoyle Posted August 26, 2015 Share #7 Posted August 26, 2015 Agree with Gunther. Now, if only some kit manufacturers would pick up on this concept and dump their cast metal boats. antanasp 1 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Hawker Hurricane Link to comment Share on other sites More sharing options...
antanasp Posted August 26, 2015 Author Share #8 Posted August 26, 2015 Thanks Brian. The Master Korabel kits realy are fantastic. I fell in love with them... . And I decided to build them all. Maybe... There were still four. Deck boat St.Gabriel, canon Yawl, schooner Polotck, brigantine Phoenix. But within half a year will be released in four kits. Tender, yacht Queen Victoria, galleon Santiago and cutter Mercury... So, I will not be sad . But Master Korabel kits have one huge disadvantage. After their hard assemble kits of other firms. I'm serious here. I agree with Chris. And not just in the same situation with small boats. For many years on the market the company does not change its drawings, technology, attitude and philosophy. But modeling has long been changed... Today may not be necessary to assemble a set of tools so much as during the whole model of the drawings. And even stranger buy kit and use only the drawings. Here's Brian in his wonderful work and kit drawings will probably not use. Found better information. In the forum is a lot of wonderful builds of these kits. The only pity is that they have spent too much time and effort by using the ancient kits. Of course, maybe I'm exaggerating a little, but really the situation should change... If you need more information about Master Korabel write PM, please. We will be happy to respond and help. Best regards, Antanas Quote ........................................................................................................................................................................................................................ Always can be done better, always can be done more! ........................................................................................................................................................................................................................ My builds: 1. 75 mm Boat - Master Korabel; 2. 95 mm Boat - Master Korabel; 3. Double boat - Master Korabel; Link to comment Share on other sites More sharing options...
antanasp Posted August 27, 2015 Author Share #9 Posted August 27, 2015 Now the last works. Added planksheer and some small details. Maked masts brackets. They are from steel pins. And glue brackets and the rudder metal parts in the place. The rudder metal parts are not very good. They must be thiner. And made oars. At the last will produce the base and display case. Regards, Antanas GuntherMT 1 Quote ........................................................................................................................................................................................................................ Always can be done better, always can be done more! ........................................................................................................................................................................................................................ My builds: 1. 75 mm Boat - Master Korabel; 2. 95 mm Boat - Master Korabel; 3. Double boat - Master Korabel; Link to comment Share on other sites More sharing options...
antanasp Posted August 27, 2015 Author Share #10 Posted August 27, 2015 The end of the build. Regards, Antanas clearway, GuntherMT, ccoyle and 1 other 4 Quote ........................................................................................................................................................................................................................ Always can be done better, always can be done more! ........................................................................................................................................................................................................................ My builds: 1. 75 mm Boat - Master Korabel; 2. 95 mm Boat - Master Korabel; 3. Double boat - Master Korabel; Link to comment Share on other sites More sharing options...
Nirvana Posted August 27, 2015 Share #11 Posted August 27, 2015 Antanas, again a fantastic build. Very nicely done. antanasp 1 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
antanasp Posted August 29, 2015 Author Share #12 Posted August 29, 2015 Thanks Nirvana. But now I see a lot of my mistakes. Scrub had to be done using 400 or even 600 grit paper. This is the first. Secondly, I had to impregnate the rope. Metal parts should be considerably thinner. And more things... But the build was very fun. Of course, the set have minor flaws. But this is not some defect. Just some things can be done better. Very consistent with my motto: "Always can be done better, always can be done more!" Regards, Antanas Quote ........................................................................................................................................................................................................................ Always can be done better, always can be done more! ........................................................................................................................................................................................................................ My builds: 1. 75 mm Boat - Master Korabel; 2. 95 mm Boat - Master Korabel; 3. Double boat - Master Korabel; Link to comment Share on other sites More sharing options...
Fam Posted October 13, 2015 Share #13 Posted October 13, 2015 Really beautifully looking small boat, and unusual (but effective) building method! Again my congratulations Antanas!! Fam antanasp 1 Quote Joint building: Brick de 24, 1/48, jointly with Jack Aubrey (POB from Ancre plans) Works in progress: USS Constitution Cross Section, 1:93 (POF bashed from Mamoli kit) Completed models: Santìsima Trinidad, 1/90 (POB heavily modified DeAgostini kit) Genoan Pinco, 1/50 (POB bashed from Euromodel plans - my current avatar) Viking Knarr, 1/72 (POF from Dusek kit) Link to comment Share on other sites More sharing options...
antanasp Posted October 13, 2015 Author Share #14 Posted October 13, 2015 Thank You Fam. Regards Antanas Quote ........................................................................................................................................................................................................................ Always can be done better, always can be done more! ........................................................................................................................................................................................................................ My builds: 1. 75 mm Boat - Master Korabel; 2. 95 mm Boat - Master Korabel; 3. Double boat - Master Korabel; Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.