Jump to content

Bluenose by MRJG - Model Shipways


Recommended Posts

Today I started on my first ship build "The Bluenose I", I recieved the kit on September 10 2015. It is the kit from Model-Expo the 1/64 scale MS2030. I am excited to get started... I started with putting the keel together, there are three pieces that make up the keel with this kit that needs to be assembled and set over night for the glue to cure, then putting a bearding line and a rabbit line that needs trimming/cutting.. as of now the keel is sitting glued together till tomorrow, I'll try to keep up with photos as I build her.
 
I would appreciate any and all comments as I keep up with building, so please give me all helpful tips and comments.post-16439-0-65846200-1442460407_thumb.jpg

Link to comment
Share on other sites

Welcome!

Bluenose is a great kit for your first build.

A couple of suggestions. One, glue a piece of thin sheet (1/32 ply works best) over the joints in the keel before framing. This will help stiffen the keel. Two, I added blocks at the aft side of frame N to stiffen the keel. I cracked mine there as have many others. At least wood is very forgiving of our mistakes.

 

Do check out some of the Bluenose and other build logs here, they were a big help to me.

 

Do not hesitate to ask questions here, a lot of friendly builders want everyone to succeed.

 

Dave B

Edited by DBorgens

Current build: HMS Pegasus, English Pinnace (on hold)

Completed build: MS BluenoseSkippercraft

Link to comment
Share on other sites

Today did as DBorgens suggested, put pieces of ply on Keel, then cut my rabbit/bearding, and then assembled the keel and Bulk heads.

 

Now as I was reading the forums and reading the booklet and also looking at the prints, I was starting to feel a little intimidated from knowing I had to cut a Rabbit and bearding, but as I thought as how I was going to do this I started to feel a little confident, as a thought came to me thinking heck what do I have to lose this is why I started on the Bluenose and joined the NRG... It was to learn and to learn to make display models so I jumped in and went to town, I was proud that the cutting turned out ok and wasn't as hard as I thought.

 

Tomorrow I'll attack the aft assembly and also put some more reinforcment in as DBorgens suggests.

post-16439-0-01843300-1442544484_thumb.jpg

post-16439-0-85268200-1442544494_thumb.jpg

Edited by MRJG
Link to comment
Share on other sites

MRJG, A warm  :722972270:

it's been awhile since a new build log of this amazing kit has been presented.

Btw, have you bought the whole paint collection of Testors? :)

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

MRJG,

That's a lot of money into paint.

And then your building area that is immaculate clean.

Looking very good!

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Today I tried to finish up on rear of the ship, but only done one part of the rudder area...  as I no longer have my scroll saw, I went out to get another. I purchased a Porter Cable Scroll saw. here are some pics of what I was working with. the block of wood is a part that needed to be cut and shaped to rear of ship.

 

I did not get to start on block of wood because I dont have my scroll saw no more and but I got another.

post-16439-0-27996400-1442631453_thumb.jpg

 

Pic from booklet the part labeled as "Block" is what I needed to cut and shape.

post-16439-0-02711600-1442631509_thumb.jpg

 

The block of wood that needs to be cut in two and shaped for the back of ship.

post-16439-0-26385500-1442631519_thumb.jpg

 

 

The section of rudder that needed to be done.

post-16439-0-01518700-1442631534_thumb.jpg

 

Clamped till set/dried.

post-16439-0-36734200-1442631546_thumb.jpg

Edited by MRJG
Link to comment
Share on other sites

Today I finished putting in the 2 blocks at the aft of the ship, and also put in 2 small pieces to reinforce the aft section...

post-16439-0-29791400-1442716353_thumb.jpg

post-16439-0-60588900-1442716374_thumb.jpg

post-16439-0-03747100-1442716391_thumb.jpg

 

 

But as I started to get ready to do some planking work I noticed that a couple bulk heads were not level at the deck, I may have to correct this so I dont get a funny looking wow effect to the deck! any ideas as to how or what I can do to fix this? I appreciate any help!

Link to comment
Share on other sites

Your progress looks good, nice work on the stern blocks. With the stem and stern pieces in place, be careful when you fair the bulkheads so you do not damage these pieces. If they are high, simply sand them down to fair with the rest of the deck. If they are low, glue e a thin strip on top and sand it down. This is one reason I like working with wood.

 

Dave B

Current build: HMS Pegasus, English Pinnace (on hold)

Completed build: MS BluenoseSkippercraft

Link to comment
Share on other sites

Dave,

As I follow this build log, I thank you for this input as next one is the Bluenose. :)

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Thanks @Dborgens for the helpful input, and @Nirvana for for checking back in on me! I feel like an apprentice again, brings back memories of fun work with Journeymen!!! I was a little worried about the decking, I was wondering if removing the couple bulkheads with some acohol and then reinstalling them would be a good idea too? well maybe I dont know! But I think your idea seems easier than fighting with glue... hehe...

 

Thanks for the help I'll go with the shimming Dborgens suggests!

Edited by MRJG
Link to comment
Share on other sites

Well I'm hopefully finished with fairing the bulkheads sides and deck. I did have to do a little shimming here and there and sanding too! thanks for the helpful tips from freinds on the forums here.

 

 

post-16439-0-65353200-1443073096_thumb.jpg

 

 

Now I think I am ready to do some Planking.

 

 

This is my first wood ship model, and I learned a Valuable lesson here! Dont forget to make sure and double sure, while installing bulkheads and also any future framing to the Keel that you are square to the keel and level for the decking! so as to you wont have to shim and sand deck areas ETC... aslo critical to make everything else to install easier! It is pretty much the back bone to your ship, if its not right then everything else isnt going to be either!

 

B)

Edited by MRJG
Link to comment
Share on other sites

As this is my first wood ship model, I was always building "Plastic Model Kits".

So far wooden ship building is more challenging, also seems to help me relax, and having to think more in advance too.

I work alot and while at work I find my self thinking about the ship constantly thinking what needs to be done next. what steps should I take to do the tasks needed to be done.

Today I have givin up on plastic kits and now prefer the wood ships instead. Now Im constantly looking on the internet for the next ship after the Bluenose to build so I can work and learn my up to scratch building.

Link to comment
Share on other sites

  • 2 weeks later...

Hi guys, I'm back... I was working 12 hour days for the past straight 21 days, along with General Motors sending me to Robotics Classes the last two weeks. I will be resuming my Bluenose build here. In a day or so.

 

I did start on some planking but only gotten a couple pieces on.

 

If anyone can give a few ideas or tips it will be appreciated, I will be trying the ideas out, as they are helpful! :D

 

B)  But the good news is my wife is home from Indonesia, and was surprised I started a new change in models... B)

 

I was looking at the forums and seen the "HMS Vulture Dan V. Built", all I can say is WOW. All the Talent, and knowledge of all people here on this web site is incredible... I really want to start plank on frame builds pretty badly now. I think its better to at least build some of easier builds to work my way there. I have been searching on the net at work finding more info on Swan Class sloops, and have a good idea what I want to build when it come that time to start POF builds.

 

B) John G. B)

Link to comment
Share on other sites

Today I purchased some more clamps, And I will be using the Black binder clips also purchased today, as Nirvana is using on his "18th century Long Boat" I'll use them to aid in the planking of the Bluenose here.

 

Those of you curious about the "18th Century Long Boat Group Project" please check it out there is allot of talent there, I was learning allot just reading some the build logs.

 

B) John B)

Link to comment
Share on other sites

Today I would like to show you what Nirvana used aid him on His "18th century Long Boat" for his planking and where I used to help me.

 

These are paper clips/binders. What you do is take one and separate the silver finger levers and then add them to the other clip. I found they work really nice!

post-16439-0-07779900-1444792422_thumb.jpg

post-16439-0-39100000-1444792443_thumb.jpg

Link to comment
Share on other sites

and also I have been using weldbond glue in a rather large bottle that seemed to hinder my progress...

 

The nozzle on the top was a too big and I always kept getting more on the project than I needed. So my wife had went out and purchased a small bottle with a longer thinner nozzle. I tell you what it sure help make the glue process allot better and less of a mess. here is a pic of the bottle with glue added to it

 

post-16439-0-22378400-1444793011_thumb.jpg

 

She was watching for few minutes and replied " you need something better than that big bottle "

then she disappeared for about an hour then came in with this bottle!

Link to comment
Share on other sites

Looking good, you are making much faster progress than I did. You're blessed to have a wife who will help your hobby in such a good way. Seems they often know exactly what we need when we don't have a clue. Keep up the good work and enjoy the ride.

 

Dave B

Current build: HMS Pegasus, English Pinnace (on hold)

Completed build: MS BluenoseSkippercraft

Link to comment
Share on other sites

For applying glue (Titebond and Weldbond both) I use a syringe.  I'll never go back to using glue straight out of a bottle (even a small one).  That little one looks like it's a great improvement over the big glue bottle though!

Link to comment
Share on other sites

One build log you should look into for great information is from Bhermann.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Your build's looking great so far - I have to say I laughed when I saw the clip clamps - I just made a bunch of these on the weekend in the lead up to planking my Yacht America. Looking forward to seeing how your BN comes together

hamilton

current builds: Corel HMS Bellona (1780)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch)
 
under the bench: Admiralty Echo cross-section; MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

For applying glue (Titebond and Weldbond both) I use a syringe.  I'll never go back to using glue straight out of a bottle (even a small one).  That little one looks like it's a great improvement over the big glue bottle though!

yes its a great improvement, but I think Ill have look into the syringe. Tha will work better for tighter spaces too.

Link to comment
Share on other sites

Looking good, you are making much faster progress than I did. You're blessed to have a wife who will help your hobby in such a good way. Seems they often know exactly what we need when we don't have a clue. Keep up the good work and enjoy the ride.

 

Dave B

Yea, we're lucky, as they do seem to know when we need them.

Link to comment
Share on other sites

For the past couple days i have been Planking the Bluenose,the planking is coming along pretty good, and pretty even so far. I'm trying to take my time with this because I want this to go on as even as possible.

 

post-16439-0-31885600-1445049477_thumb.jpg

 

I am planking each side as I go to keep from have a WOW effect (warping of Hull) to the ship

post-16439-0-35969600-1445049492_thumb.jpg

 

as you can see this is going on pretty even on each side

post-16439-0-24623800-1445049503_thumb.jpg

Link to comment
Share on other sites

  • 5 years later...

Hi everyone, Been gone from my project here for long while... My apologies, I have a daughter that Graduated from College with a double Major "Neuroscience and Psychology" she makes me very proud, been a quick trip there helping her with college a ton of 12 hour days to boot! well any way I'm planning to finish the Blue Nose Build here now that I have time, just need to set up my room up again settling in here! 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...