Jump to content

Cutty Sark by samson - Billing Boats


Recommended Posts

Hi All

 

 

I¨m new to this page so have a litle pations wit mee . trying figuring out how it all funks.

 

Ennyway My name is Jens and i live in Copenhagen  Denmark , so my englis is onfortunaly not the bedst but i vill take Google translate in youse later on . 

 

:D

 

I am building an old Billing Boats no. 459 Cutty sark as i board sekond hand som years ago and has now buildt for at least 2 years . im nerly finish with the ships hull and is about  building the lifeboats . The pic. belov is  about 1 week old. 

 

I planing to schove pic. from the start and the hole proces as if i started on day 1. and sofort to today .

 

I consither this letter therfor as a test in how this page woarks an will therfor erease it again hwen i soone start my "reeal " building log .

 

 

Cheers All.

Jens 

 

 

post-23331-0-39881400-1452289487_thumb.jpg

Link to comment
Share on other sites

Hi everybody and thanks for komments  Omar , Bill and hof00
 
So I start my Cutty Sark log
 
First, a little background. I built models since I was a boy - back then it was Airfix I gathered. I also built a few wooden boats -but it was not here it caught my interest razed to build in wood
In 1976 or 77, I bought Billing boats See Adler and built the hull but went dead in having to make the rig. so in 1990 I built the finish after having cleaned it off for 13 years dust.
In 2010 I build my first Cutty Sark - it's Billing Boats 564 - laser cut.
I was not entirely happy with the result and I got the opportunity to try Artesanias Cutty Sark , It was a completely eye-opening experience. there is real quality in diferens in detail and material selection .and in the building instruction.
With this model, I got a building log on a side called Jolly Roger shipyard,
the closed and so I continued on a page - Model Space Forum where I still am today.
 
 
post-23331-0-13696900-1452348349_thumb.jpg
Billing boats See Adler finish  1990-91
 
post-23331-0-26518200-1452348393_thumb.jpg
Billing boats 564 My first Cutty Sark
 
 
 
post-23331-0-89290000-1452348117_thumb.jpg
Cutty Sark Artesania Latina  My sekkend C.S. 
 
 
 
But what this is all about is my third Cutty sark - Billing Boats 459 bought used about 30 years old but "almost" complete with fittings.
post-23331-0-80838800-1452348475_thumb.jpg
 
post-23331-0-64549000-1452348504_thumb.jpg
 
 
I stop her . and start nekst leder building op the freams/ribs . see you son 
 
Cheers All
Jens
 

 

Edited by samson
Link to comment
Share on other sites

Hi Again 

 

The frames are cut on a band saw by hand

and therefore somewhat coarse

 

I will build a false keel so that's why I cut the bow of

 

post-23331-0-31514900-1452350527_thumb.jpg

post-23331-0-62650400-1452350545_thumb.jpg

 

i folov building instruktion from Artesania , so i cut avay standings but in a way i can youse them later for chaping the bulwork.

 

post-23331-0-71210100-1452350575_thumb.jpg

 

post-23331-0-66602800-1452350603_thumb.jpg

 

The frames are set after a string

post-23331-0-24266200-1452350633_thumb.jpg

 

post-23331-0-08538600-1452350659_thumb.jpg

 

I build things inside the ship and fake iron frames.

the plan is to be able to look down into the cargo.

 

post-23331-0-73690700-1452350763_thumb.jpg

 

post-23331-0-85630600-1452350796_thumb.jpg

 

post-23331-0-36786300-1452350840_thumb.jpg

 

All for now next ledder light inside and dekking .

 

Cheers Jens

Link to comment
Share on other sites

I will also build inside the captain's cabin, it requires little modification

 

post-23331-0-19851100-1452353797_thumb.jpg

 

post-23331-0-59215400-1452353823_thumb.jpg

 

 

 

I mount  car dashboard lights inside the ship

I  just did it wrong they were connected in series, they should have been parallel connected  -  expensive learning money. :(

 

post-23331-0-31779300-1452353868_thumb.jpg

 

post-23331-0-67936400-1452353935_thumb.jpg

 

post-23331-0-65410800-1452353991_thumb.jpg

 

post-23331-0-69529900-1452354157_thumb.jpg

 

Cheers All

Jens

 

 

Link to comment
Share on other sites

Hi All

 

I have the idea of building with aluminum at locations where, in fact, is used iron, and it is especially the sea rail I am thinking of.- metal for  metal.
post-23331-0-79531800-1452370690_thumb.jpg
 
post-23331-0-39898000-1452370732_thumb.jpg
 
post-23331-0-39442700-1452370771_thumb.jpg
 
post-23331-0-82724900-1452370788_thumb.jpg
 
 
The wood that is in the kit are balsa wood. which in my opinion can only be used for gliders.
I use only the deck plates. the wood I instead use is from a scrapped Artesania kit I have taken over - and what is left from Artesania CS
 
post-23331-0-44114400-1452370926_thumb.jpg
 
havewer i uses billing wood as filler  mostly to get read of it in a konstruktive way 
 
post-23331-0-34318500-1452370959_thumb.jpg
 
post-23331-0-81070800-1452371114_thumb.jpg
 
Her dek is way onder way .
 
post-23331-0-36965400-1452371193_thumb.jpg
 
Dek finish
 
post-23331-0-58810700-1452371259_thumb.jpg
 
planking started 
 
:)  Its so long a lether i have to cut in 2.
 
 
 
 
 
 
 
Link to comment
Share on other sites

planking pic. 

 

post-23331-0-95634200-1452372071_thumb.jpg

 

post-23331-0-56869000-1452372098_thumb.jpg

 

post-23331-0-42827100-1452372127_thumb.jpg

 

It is african walnut 1.8 x 5mm planking from Artesania models.

 

post-23331-0-32929400-1452372156_thumb.jpg

 

post-23331-0-27498700-1452372180_thumb.jpg

 

post-23331-0-69741700-1452372222_thumb.jpg

 

Planking finish and redy for fals kel - frame broken of in stern , isy to glue on again. :)

 

Well it thake longer than expekted making this log so ill stop for today and kontinu later on . 

 

Cheers  All   B)

 

Jens.

Link to comment
Share on other sites

Hi Richard , Tasmanian , Peter and Thunder 

Thanks for righting mee prisietet it   :D  :D  :D  :D

 

Richard Thanks for nice  koment.  

 

Peter Jenssen  Jeg skulle vel ikke kunne skrive til Dig på dansk ?

 

Tasmanian    EL Chapo ? Hu is He ?

 

 

Thunder     . The bedst Kit in my opinion ?

 

The best kit between Billing Boats and Artesania Latina Cutty Sark for the price is certainly Artesania. when talking about material selection, detail, instructions. This also makes artesania far harder / fun to build if they were from the same factory would Billing be catalysed  light and artesania for hewig to build.

 

 

Cheers All

Jens.

Edited by samson
Link to comment
Share on other sites

The Bulwarks 

 

post-23331-0-29245200-1452431207_thumb.jpg

 

post-23331-0-16308200-1452431238_thumb.jpg

 

Her chowes how power conektet trough stand . and the fals kel.

 

also starting put on alu.  bulwarks .

 

post-23331-0-10131200-1452431264_thumb.jpg

 

The front dek i do like billing make it ( a chape it was under its time under portugise flag .) 

 

post-23331-0-75089500-1452431296_thumb.jpg

 

post-23331-0-45042900-1452431318_thumb.jpg

 

Then the dek on the front dek and that it .

 

post-23331-0-64457600-1452431337_thumb.jpg

 

Cheers All

Jens

Link to comment
Share on other sites

Hi All 

 

This is a little unfair way to make a buildlog on  hven you alredy hawe don the building  . at this stage i proberly hawe build on the model for over a year. and this log has taken 2 days so far.  :huh:

 

enyway it dont stop me , im in a hury to get this Loooo..oong opdat finish so i kan go back building again  :D

 

post-23331-0-71904100-1452455481_thumb.jpg

 

post-23331-0-64215700-1452455495_thumb.jpg

 

post-23331-0-56374200-1452455511_thumb.jpg

 

post-23331-0-80731800-1452455542_thumb.jpg

 

post-23331-0-02117300-1452455575_thumb.jpg

 

I make the figurehead in Teak wood  when i dont find wats folowed the kit to bee the right sice.

 

Then the cobber butum in paper -"HVAY IN PAPER" ? Becors i have paper and it look reight first painted  B)

 

post-23331-0-79527900-1452456431_thumb.jpg

 

post-23331-0-76508800-1452456463_thumb.jpg

 

post-23331-0-15932000-1452456495_thumb.jpg

 

post-23331-0-21132500-1452456527_thumb.jpg

 

post-23331-0-58100400-1452456564_thumb.jpg

 

post-23331-0-23189100-1452456594_thumb.jpg

 

post-23331-0-36012100-1452456633_thumb.jpg

 

and then finly waterline fender 

 

Cheers All

 

Jens

 

Link to comment
Share on other sites

Hi Nenad   Thanks for comment.  :)

 

Her is some detales in Alu .

 

attachicon.gifBillede 385.jpg

 

attachicon.gifBillede 388.jpg

 

attachicon.gifBillede 426.jpg

 

attachicon.gifBillede 437.jpg

 

attachicon.gifBillede 458.jpg

 

attachicon.gifbilled (17).jpg

 

All ornamentation cut out of a 1mm aluprofil. board in a hardwar stoor for building konstruktions

 

 

Cheers All

 

Jens

Hi Jens, beautiful work,  the bulwarks are  super, how did you adatch the  stanchions to the aluminium bulwarks?

Greetings, Rudolf

Link to comment
Share on other sites

Hello Peter   Fun to write to a Scandinavian on the other side of the earth. 

 

And as you write, it is not good enough that they - Billing Boats do not want to use their own figurehead. and that they now deliver Mark 3 ordision Laser cut and everything and then still with the same old crap that they came up with? 1965-70? It is only the dead eys and the blocks that have changed to wood. since then. They kut due better .

 

Cheres Jens.

Link to comment
Share on other sites

Hi Rudolf

i mad a princip plan to explane how it build up. 

 

 

 

post-23331-0-87728400-1452527196_thumb.jpg

 

 

 

After laying the dek plate on , i put wood in the korners betwin the frames  so ther was bagground for mounting the alu vit glu an  tempreary nails .  under the alu begids the "reeal" planking  But to make it little more dificult i startede wit planking first then alu and otsid a slim list to covor ataksion from alu and over this list a squar list  -- Now the aly is glued in bottom and stands by itself only under control in front and back . at this point you have to chape it  and that you do by gluing a squar list on indsid top of alu . and this chapes the curwe of the ship så be kritikal vith the chape it taks as it is permanely . Afterwards you dril tru the squar list and dovn in the dek and glue the round stanchions in.

 

I hope it not all nonsens to read .  ;) 

Link to comment
Share on other sites

Hi Rudolf

i mad a princip plan to explane how it build up. 

 

 

 

attachicon.gifBillede 391.jpg

 

 

 

After laying the dek plate on , i put wood in the korners betwin the frames  so ther was bagground for mounting the alu vit glu an  tempreary nails .  under the alu begids the "reeal" planking  But to make it little more dificult i startede wit planking first then alu and otsid a slim list to covor ataksion from alu and over this list a squar list  -- Now the aly is glued in bottom and stands by itself only under control in front and back . at this point you have to chape it  and that you do by gluing a squar list on indsid top of alu . and this chapes the curwe of the ship så be kritikal vith the chape it taks as it is permanely . Afterwards you dril tru the squar list and dovn in the dek and glue the round stanchions in.

 

I hope it not all nonsens to read .  ;) 

thank you, that clears it up. Very ingenious !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...