Jump to content

Schooner Altair by KeithAug - Scale 1:32 - 1931 - Finished


Recommended Posts

Over the weekend I almost completed the launch.

 

The foredeck was planked - hard to tell though. I also made the foremost bench together with the 4 gussets that reinforce the attachment to the hull.

DSC07316.thumb.JPG.2ae5bb7257642b3c9a85e6a4fa2c747d.JPG

The trickiest bit was the splash rail. The corners were much too tight to bend so these were cut from solid. Once mounted on the deck  rail the were joined buy 3 bent planks.

.fullsizeoutput_10ff.jpeg.f84ee3f2f68eb5a11dd818234b673a74.jpeg

It's probably worth explaining that I am using 2 sources of mahogany (one much lighter in colour) to add interest to the launch.

 

I then added the interior detail of the engine housing, prop shaft cover and instrument bulkhead. The engine housing has the gear lever mounted.

DSC07323.thumb.JPG.e16fffec97229f6cfc2c611d30829c3f.JPG

The rudder then went on with the bracket to support the lower end.

DSC07328.thumb.JPG.c3bfb8cde4d09079d2023eefb394f551.JPG

I made and mounted the brass fittings on the small foredeck. The brass protective strip for the stem was also made and mounted. By this stage I had given the inside a coat of poly - still a bit wet when the following photos were taken.

fullsizeoutput_10fc.thumb.jpeg.91a7df5d2419d1f8d551f3a41f8bac5a.jpeg

fullsizeoutput_10fa.thumb.jpeg.ec9baf5b82252d9da21a93b20ec69e0c.jpegIMG_0198.thumb.jpg.695167389963a34a5250e1a88639c1d9.jpgIMG_0206.thumb.jpg.68e685b4a40da2004ad428ae979d5f5a.jpgIMG_0209.thumb.jpg.6cb25f9ad4b917492c48b070b5510e3f.jpgI have delayed mounting the wheel and throttle lever until the internal painting is complete. I now need to make the cradles for mounting the launch on the deck.

 

Edited by KeithAug

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Wonderful detailing Keith, the launch is a mini-project in its own right.

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

15 hours ago, KeithAug said:

I have delayed mounting the wheel and throttle lever

Keith,

 

You have really disappointed me for the first time. With your undeniable machining skills I cannot believe you haven't constructed a workable mini diesel motor for the launch, I see the engine cowling and hump for the transmission. All kidding aside the launch is a 10+:cheers:

John Allen

 

Current builds HMS Victory-Mamoli

On deck

USS Tecumseh, CSS Hunley scratch build, Double hull Polynesian canoe (Holakea) scratch build

 

Finished

Waka Taua Maori War Canoe, Armed Launch-Panart, Diligence English Revenue Cutter-Marine  Model Co. 


 

Link to comment
Share on other sites

Guest Riccardo1966

Hello Kieth,

The launch is beautiful, easily good enough to display on its own. The colour of the wood and the finish that you have achieved really shows up well in the last photo. First class scratch building.

Richard

Link to comment
Share on other sites

Thank you Pat.

 

John,

On 15/01/2018 at 12:37 PM, John Allen said:

You have really disappointed me for the first time. With your undeniable machining skills I cannot believe you haven't constructed a workable mini diesel motor for the launch

 Sorry, I would have but I could not find spark plugs small enough ( i think in 1931 it was a petrol engine).

 

John,

On 15/01/2018 at 7:18 PM, Jim Lad said:

Well, I suppose the launch looks fairly reasonable

You sound like my wife, have you been taking lessons?

 

Richard - thank you. 

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

6 hours ago, mojofilter said:

especially like the contrast light/dark mahogany

Thank you Tim.

 

The darker mahogany is circa 100 years old. It is quite dense and close grained. It came from a once very nice dining table which i suspect was made from prime timber. Not very much like the mahogany sold today. The lighter mahogany was from block flooring recovered from a old building before being relaid on my daughters kitchen floor. I'm using up the offcuts. I think its about 50 years old. It does have a more open grain and fibres lift when coarse sanding.

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

I finished the launch by attaching the wheel and throttle lever.

 

fullsizeoutput_1107.thumb.jpeg.01f9dc2a647bc513afd8ee9a636d7a3e.jpegfullsizeoutput_1108.thumb.jpeg.535b5fe0d34a31c0301115a719f202ce.jpegfullsizeoutput_1109.thumb.jpeg.49b54235f320fd5a9f22bbff8f119e03.jpegfullsizeoutput_110a.thumb.jpeg.b98dd4c3f4ec2f24e3f37946a2ad30e9.jpegfullsizeoutput_110b.thumb.jpeg.65cc9f8a58f90d7baedd9ff11012e395.jpegfullsizeoutput_110c.thumb.jpeg.3841467269764ef6d4055dffadef31ef.jpeg

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

That is superb Keith, love that polished detail against the wood - exudes 'luxury', or should I say 'money' :)

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

That is a very sharp looking launch. Well done!

Happy modelling!

Håkan

__________________________________________

 

Current build: Atlantica by Wintergreen

Previous builds

Kågen by Wintergreen

Regina by Wintergreen

Sea of Galilee boat, first century, sort of...

Billing Boats Wasa

Gallery:

Kågen (Cog, kaeg) by Wintergreen - 1:30Billing Boats Regina - 1:30Billing Boats Dana

Link to comment
Share on other sites

Keith,

 

It goes above and beyond any description. maybe the best word is PERFECT. Double Toddy:cheers::cheers:

John Allen

 

Current builds HMS Victory-Mamoli

On deck

USS Tecumseh, CSS Hunley scratch build, Double hull Polynesian canoe (Holakea) scratch build

 

Finished

Waka Taua Maori War Canoe, Armed Launch-Panart, Diligence English Revenue Cutter-Marine  Model Co. 


 

Link to comment
Share on other sites

Pat, thank you and yes she is a rich mans toy.

 

Hakan, Thank you.

 

John, Thanks. a wee dram sounds like a good idea.

 

The time came to introduce the launch to it mother. I made it cradle from mahogany strip, shaped using the templates for the frames. The holes for the lashings were reinforced with brass rivets (visible in the photos). The cradles are each held down using 4 spectacle repair screws. I made a card template to align the cradles and get them in the correct position.IMG_0268.thumb.JPG.c80145ab421e0d435a246bb107ccfb49.JPGIMG_0269.thumb.jpg.ffbef3eebb130cd2f105e76abf347f21.jpg

When the launch is on the cradles it fills the available space and must restrict deck operations to a significant degree. 

IMG_0272.thumb.jpg.c14e818bb99d1c7c3f74d323455ed0f9.jpg

IMG_0273.thumb.jpg.fcd2f9da7457462d22fd581a4fbec171.jpgIMG_0271.thumb.jpg.76d6da6840e34ba0d63c426ccddc311f.jpg

Altair actually has 2 other boats, both smaller than the launch. Photographs of Altair frequently show no boats on deck and when they are carried the smaller boats seem to be favoured. In the photograph immediately above I have removed the aft davit to ease access.

 

I lashed the launch in place using a length of twine. Several photographs show the launch lashed in place. Mother is very pleased to have baby on board.

IMG_0275.thumb.jpg.62a89d32557a21733f4dba095e3fc54c.jpgIMG_0277.thumb.jpg.d1efa89ecfd7caa2cd5eb938985e200b.jpgIMG_0279.thumb.JPG.6eef66a60162b764119d62b403f2078e.JPGIMG_0280.thumb.jpg.e4dbd1e4013c93bd160ba3cfc1ca2056.jpg

 I'm going to try and make some progress on the stand this week - before a diversion into refurbishing my daughters bathroom - yuk!!!

Edited by KeithAug

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Wonderful work Keith,

 

a real classy launch for a top classy yacht, looks awesome !!

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Thank you Nils and John.

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Over the last couple of days I made progress on the stand. Im planning to suspend the yacht on 4 legs and the starting point is to work out the proportions of the legs. This I have done by selecting the frames where the legs will sit and then drawing the adjacent leg to scale.IMG_0297.thumb.JPG.a1d8fd195093c1dac6dc27f0386a6aba.JPG

The legs are made from polished stainless steel. Not a material I am very fond of working with.

IMG_0298.thumb.JPG.d3f317a412cdb97013121016e7b7824d.JPG

Where the side arms abut the hull I wanted something more forgiving than metal so the ends are machined from nylon. A brass insert between the side arm and nylon end will can be machined to tune final fitting.

IMG_0299.thumb.JPG.4144e4beb71115a4e8809465da650257.JPGIMG_0300.thumb.JPG.8fc526043417c6a7cedb84144c5907bd.JPG

The top of the legs provide side restraint and where they bear on the hull they softened with "O" rings. The "O" ring grouves could have been machined directly into the stainless but I thought the brass end added a bit of interest.

IMG_0301.thumb.JPG.baca8e2480288b16fa4bf6338dcf338d.JPGIMG_0302.thumb.JPG.9be3908a77636b039afdb6e6ed914390.JPGIMG_0303.thumb.JPG.c9c2795621cc9b88647d05b6660dcebd.JPG

The bottom of the legs are drilled and threaded to take the base attachment bolts.

IMG_0304.thumb.JPG.6ad98dba084dbec7e4f70542eb0fb938.JPG

A 1/4 inch thick stap joins each pair of legs.

IMG_0305.thumb.JPG.8cad72f5f312d406fd33a8df0bf3a987.JPGfullsizeoutput_110d.thumb.jpeg.5e0114c808c401ced8f85577abe11db1.jpeg

The base board is next.

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Stylish Keith :-)

Happy modelling!

Håkan

__________________________________________

 

Current build: Atlantica by Wintergreen

Previous builds

Kågen by Wintergreen

Regina by Wintergreen

Sea of Galilee boat, first century, sort of...

Billing Boats Wasa

Gallery:

Kågen (Cog, kaeg) by Wintergreen - 1:30Billing Boats Regina - 1:30Billing Boats Dana

Link to comment
Share on other sites

Very, very nice. A really elegant and stylish way to set off the Altair.  Best, John

Member:

Connecticut Marine Model Society

Nautical Research Guild

Model Ship World

"So we beat on, boats against the current, bourne back ceaselessly into the past" F. Scott Fitzgerald - The Great Gatsby

"If at first you don’t succeed.......skydiving is probably not for you”

 

Link to comment
Share on other sites

A very complimentary stand Keith; just like an upmarket hard stand cradle?

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Hi Keith, Beautiful work on the launch, I have to admit I am not fond of the white line holding it to the deck though. I would have thought that a couple of leather covered straps would suit the luxury of the launch.

Your solution for the stands are not only very elegant but are very nicely crafted. I look forward to seeing the yacht in her cradle.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Haken, Pat, Richard, Mark. thank you all very much for your kind comments.

On 29/01/2018 at 8:36 PM, michael mott said:

I would have thought that a couple of leather covered straps would suit the luxury of the launch

 

Michael, an interesting thought. The only photograph I have is one of the smaller dingy strapped to the deck. Here the straps seem to be of webbing.  To carry off the leather idea the leather needs to be very thin and i know of a source as my wife is addicted to fine leather gloves. She is also apt to lose one every now and again so next time she does I may do the upgrade.

 

No boat progress this week although I have ripped out tiles, rebuilt walls, plumbed in sinks and radiators, and laid 140 sq ft of ceramic tiles. My daughter is pleased.

Edited by KeithAug

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

I really must crack on and get this build finished. At least I have had time to finish the display stand. It took some time to trim the front legs to get Altair to sit with her waterline level. Now all that’s left to do is make and mount the ensign and the Royal Thames Yacht Club flag. Oh and replace 3 stays that have loosened as the model has acclimatised to the house conditions.

E52F008A-EB7E-491F-A028-150795ADD466.thumb.jpeg.40a3258bfefb11def85f6fd1b9b45fb0.jpeg

I must catch up on other people’s logs before I get withdrawal symptoms.

 

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

That is a very nice display stand Keith; it should set off the model beautifully.

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Truly beautiful work, Keith - 

 

The launch and mother ship are beautiful together, and the stand is a piece of engineering worthy of any Museum of Fine Design.  It has been a privelege to follow along on your journey.

 

Dan

 

Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser

 

Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS OneidaSwan 42 racing yacht  Queen Anne's Revenge (1710) SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914),  James B Colgate (1892),  POW bone model (circa 1800) restoration

 

Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas

 

"Take big bites.  Moderation is for monks."  Robert A. Heinlein

 

 

Link to comment
Share on other sites

6 hours ago, shipmodel said:

Truly beautiful work, Keith - 

 

The launch and mother ship are beautiful together, and the stand is a piece of engineering worthy of any Museum of Fine Design.  It has been a privelege to follow along on your journey.

 

Dan

 

What he said!

Link to comment
Share on other sites

Pat, Dan, Tom and Bedford - thank you all for your supportive comments.

 

Today I was looking at the yacht  thinking “that’s it” when I noticed the obvious omission. 

 

56602B37-B402-4217-B676-1467DF37F724.thumb.jpeg.2e7b098ec24f3e54558be25a0ecd0040.jpeg

Sometimes in life we lose the big picture in all that detail and end up rudderless. 

 

I made the rudder in September 2016, now I just have to find it.

 

Edited by KeithAug

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...