Jump to content

Swift 1805 by stripehunter - FINISHED - Artesania Latina - 1:50 - first build


Recommended Posts

work on the case continues. all the wood is cut now, just waiting for the finish to dry before assembling.  Will be wood angle trim over all the glass corners.

post-22182-0-90479400-1477273309.jpg

Current build:

Constructo Enterprise 1799

Completed build:

Artesania Latina Swift 1805

Started but on hold:

Sergal President 1760

Link to comment
Share on other sites

Case is done except for the pedestal mounts ill put in when the ship is done. The red chestnut stain came out a little lighter than i would have liked but not much i can do about it now.

 

post-22182-0-01422800-1477354470.jpg

Current build:

Constructo Enterprise 1799

Completed build:

Artesania Latina Swift 1805

Started but on hold:

Sergal President 1760

Link to comment
Share on other sites

A year to the day since I bought the kit, I am finished.  My only regret is I wish I would have kept track of my total hours worked.  Will do that next time.  Thanks for all the likes and kind words along the way.

 

post-22182-0-78259300-1477797921.jpg

 

post-22182-0-31356500-1477797922.jpg

 

post-22182-0-80048900-1477797922.jpg

 

post-22182-0-31429100-1477797923.jpg

 

post-22182-0-76959900-1477797923.jpg

 

post-22182-0-21387100-1477797924.jpg

 

post-22182-0-68361400-1477797924.jpg

 

post-22182-0-39408900-1477798024.jpg

 

post-22182-0-86255200-1477798024.jpg

 

post-22182-0-54174500-1477798025.jpg

 

post-22182-0-05251000-1477798026.jpg

 

post-22182-0-43462800-1477798026.jpg

 

post-22182-0-89971500-1477798026.jpg

 

post-22182-0-29282600-1477798027.jpg

 

Current build:

Constructo Enterprise 1799

Completed build:

Artesania Latina Swift 1805

Started but on hold:

Sergal President 1760

Link to comment
Share on other sites

Well done. Congrats on a fine looking model. The main thing is the fun you had and the pleasure you gained in building it. :)

 

Russ

Link to comment
Share on other sites

Congrats on finishing your first. It surely doesn't look like a first! Such a nice build.

 

I look forward to your next. :)

 

Robin

WIP: No ships atm...sorry!🙄

Completed: Greek bireme - Dusek - scale 1:72

 Louie da fly: "I think it requires a special kind of insanity to choose a galley to build a model of."

Link to comment
Share on other sites

  • 4 weeks later...
  • 4 weeks later...

I am enjoying your log. I started working on my 1805 Swift 35 years ago. I purchased it before having children and got the first layer of planking set. Then... life got busy. 

 

All our kids are successfully launched and I recently retired. So, the little ship is once again progressing.

Link to comment
Share on other sites

  • 3 years later...
On 3/17/2016 at 6:17 PM, stripehunter said:

My bulwarks seemed a little too angular in the stern.  I steamed the back portion of them and clamped them to dry and square things up. 

 

post-22182-0-45723200-1458259597_thumb.jpg

 

Given the little irregularities in the lay of my deck, I opted to plank the bulwarks after application. 

post-22182-0-88920400-1458259634_thumb.jpg

 

My first working with the thin planking, I decided to let it take the shape of the bulwarks, angling up at the bow.  In hindsight, I probably would have used my jig to shape these planks, as I did on the outside.   Live and learn, although I must say I'm not opposed to the angular appearance.  Most of this will be concealed anyway.

 

At this point, I decided that I would apply the keel/stem/post before the second planking.  I applied the stern piece, and started filling it in. 

post-22182-0-83225400-1458259978_thumb.jpg

post-22182-0-42751500-1458259978_thumb.jpg

 

At this point, I wasn't sure what to do about the stern and the post; whether to transition to thinner planking, etc. There's not good pictures or instruction detail regarding this area.  After giving it much thought, I decided to use thick wood over the entire stern/rudder area.  This would make my keel too short, so I opted to inlay the post into this wood. It should put the rudder in a nice spot still, and I like the results so far.

post-22182-0-63168400-1458260153_thumb.jpg

 

I glued the post in place there before doing the rest of the keel pieces.

post-22182-0-20282200-1458260153_thumb.jpg

 

Thank you for posting this, this is the point i am at in my build that almost made me quit - I have a bit of an idea what to do now, thank you!

Link to comment
Share on other sites

  • 3 months later...
  • 2 years later...
  • 2 weeks later...

I know it's been a lot of years since you finished this model so maybe you don't monitor this anymore, but I'm hoping I can still hear from you.  I am really impressed with your final planking (among other things). You used some clear tape to make a template for curving the planks.  What type of clear tape did you use and what did you write on it with - a marker?  Could you tell me more about the process.  I'm about to do the final planking on my first build, the early version of the Swift kit.  Your hull looked really great.  Here's my log: https://modelshipworld.com/topic/24292-swift-virginia-pilot-boat-1805-by-jim-in-kc-artesania-latina-150-scale-first-wooden-ship-build/

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...