Jump to content

Recommended Posts

Posted (edited)

Hi guys,

I’m a newbie here, and I come from Taiwan(not Thailand).

here I'd like to show you my little tips & tricks:

 

You can get the wooden Christmas card or any wooden book card:

post-24632-0-38185500-1460232698_thumb.jpg

 

to make carved doors or carved wall

post-24632-0-39629100-1460232716_thumb.jpg

 

And the lead ball is better then steel balls to simulating the cannonball ….

post-24632-0-34219100-1460232735_thumb.jpg

post-24632-0-10884900-1460232749_thumb.jpg

 

using syringe to control the flow of glue

post-24632-0-06908500-1460232992_thumb.jpg

 

May the force be with you.

Edited by thelastronald
Posted
Always measuring the size of kits by a human model:

 

We know the length of body in 1:50 scale is about 36mm, but it's hard to imagine, 

such as Stair step height, the Size of a Table.. and so,

let's make a human model with the wood or paper on the cheap.

 

post-24632-0-06519900-1460240395_thumb.jpg

post-24632-0-64398500-1460240405_thumb.jpg

Posted (edited)
The plywood is cheap, but it can't touch water. There’s one safe way to Bend those kits made by Plywood:

using steam-bending. 

 

1. put it into a food steamer

post-24632-0-89575100-1460313467_thumb.jpg

 

2. steam above water for 10 minutes

3. Bending the Curve.

4. When it cooling down, repeat all steps above until you finish it.

 

post-24632-0-04028600-1460313502_thumb.jpg

 


But if the thickness of plywood less than 4 mm, using an iron(put a wet cloth under it)

Bending the plywood while it is hot.

post-24632-0-68997200-1460314600_thumb.jpg

Edited by thelastronald
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...