Jump to content
civilian

Cutty Sark by civilian - Constructo - 1/90

Recommended Posts

Hi everyone!

 

This will be my official build log for Construto's Cutty Sark 1/90. I am already about 5 weeks into the build and finished the hull planking, deck cabins & decorations and is currently working on masts and rigging. 

 

I start my build log this late because I do not want to end up not finishing the model at early stage and everyone knows about it. While I was building the ship, I tried to stick to manufacture's plan with no side work of sketch builds. I will also not paint or stain my model as I think the original dark and light wood color scheme is quite nice. 

 

First is a little bit history of Cutty Sark form the Manufacture:

 

"The Cutty Sark is a clipper ship. Built in 1869 for the Jock Willis shipping line, she was one of the last tea clippers to be built and one of the fastest, coming at the end of a long period of design development which halted as sailing ships gave way to steam propulsion. 

The opening of the Suez Canal (also in 1869) meant that steam ships now had a much shorter route to China, so Cutty Sark spent only a few years on the tea trade before turning to the trade in wool from Australia, where she held the record time to Britain for ten years. Improvements in steam technology meant that gradually steamships also came to dominate the longer sailing route to Australia and the ship was sold to the Portuguese company Ferreira and Co. in 1895, and renamed Ferreira. She continued as a cargo ship until purchased by retired sea captain Wilfred Dowman in 1922, who used her as a training ship operating from Falmouth, Cornwall. After his death she was transferred to the Thames Nautical Training College, Greenhithe in 1938 where she became an auxiliary cadet training ship alongside HMS Worcester. By 1954 she had ceased to be useful as a cadet ship and was transferred to permanent dry dock at Greenwich, London on public display. 

Cutty Sark is one of three ships in London on the Core Collection of the National Historic Ships Register (the nautical equivalent of a Grade 1 Listed Building) – alongside HMS Belfast and SS Robin. She is one of only three remaining original composite construction (wooden hull on an iron frame) clipper ships from the nineteenth century in part or whole, the others being the City of Adelaide, awaiting transportation to Australia for preservation, and the beached skeleton of Ambassador of 1869 near Punta Arenas, Chile."

 

There are some photos of the packaging.

 

post-14181-0-95972400-1469982289.jpg

 

post-14181-0-76127900-1469982291.jpg

Edited by civilian

Share this post


Link to post
Share on other sites

Can I join and watch?

 

Hot wellcome to MSW CS Fleet

 

Waiting inpatiently for progress and more photos

 

Cheers

 

Nenad

Share this post


Link to post
Share on other sites

First I will do some kit review.

 

The kit is manufactured by the toy company Constructo in Spain. The scale is 1/90.

However, this kit is no longer in production. Instead, a newer 1/115 scale model is available where the whole model is about 2 inch shorter and there are some minor changes on the deck fittings. 

 

Plans: There are five sheets of plans on three sheets of paper, including one sheet of plan & section, one sheet of elevation, two sheets of rigging and one sheet of sail patterns. All of them are hand drawn, so some inaccuracy can happen and some times you really need to figure out what is happening in the drawing.

 

post-14181-0-42696900-1469982694_thumb.jpg

 

post-14181-0-81584100-1469982698_thumb.jpg

 

post-14181-0-96425100-1469982702_thumb.jpg

 

post-14181-0-72974800-1469982706_thumb.jpg

 

post-14181-0-07472700-1469982711_thumb.jpg

 

Instructions: Even though it seems like you have a good booklet of instructions, it was actually not the case. The instructions was written in 6 different languages. Thus, in the English section only contains five pages, in which two pages are actually part list. The drawings in the booklet is also very diagrammatic and sometimes do not have a scale.

 

post-14181-0-95292400-1469982715_thumb.jpg

 

post-14181-0-32742800-1469982720_thumb.jpg

 

post-14181-0-71141900-1469982726_thumb.jpg

 

post-14181-0-04143100-1469982731_thumb.jpg

 

Materials: The materials supplied by the kit are generally of good quality. The hull is a die cut sheet of 3-ply wood. and other wood mainly consists of strips of dark-colored mahogany and light-colored ayous in different sizes. 

 

The kit uses 2mmx6mm mahogany wood as first layer of planking and 0.5mmx6mm mahogany wood as second layer of planking. As you can see, the material for the first layer of planking is very unusual as mahogany is a relatively hard wood. According to the manufacture, skilled model makers can eliminate the need for second layer planking. Well, I am not one of them...LOL. Luckily, the hull shape of the Cutty Sark does not have dramatic curvature, so the whole planking procedure did not present too much of a challenge to me. 

 

post-14181-0-19365100-1469983473_thumb.jpg

 

The cast fittings are made of brass and cast iron (?), I left brass parts as their original color and painted the cast iron parts from gray to black. 

Share this post


Link to post
Share on other sites

Finally, Photo Time!

 

First I want to apologize that I did not took any photos while I did the hull planking, as I was not really sure if I should open a build log.

 

These are photos of my progress till last week. I will update my progress this week very soon.

 

 

post-14181-0-49202800-1469984973_thumb.jpg

post-14181-0-95706400-1469984975_thumb.jpg

post-14181-0-50469900-1469984978_thumb.jpg

post-14181-0-36366500-1469984981_thumb.jpg

post-14181-0-15256600-1469984984_thumb.jpg

post-14181-0-80033500-1469984986_thumb.jpg

post-14181-0-85063300-1469984989_thumb.jpg

post-14181-0-03315000-1469984993_thumb.jpg

post-14181-0-80815300-1469984995_thumb.jpg

post-14181-0-75875000-1469984998_thumb.jpg

post-14181-0-23834700-1469985008_thumb.jpg

post-14181-0-98310400-1469985010_thumb.jpg

post-14181-0-62041100-1469985013_thumb.jpg

Share this post


Link to post
Share on other sites

Hello my friends,

 

It has been a while since my last post, so it is a time for an update.

 

First, I made the bowsprit. Since the front of the hull does not have a precut hole for the bowsprit and I figured it would be too difficult to drill a hole now, so I sanded the bottom of the bowsprit at an angle.

 

post-14181-0-89685900-1472447029_thumb.jpg

 

Then, I worked on the three masts. The finished masts are shown in the picture below.

 

post-14181-0-29908600-1472447038_thumb.jpg

 

Yards are first roughly cut to shape by a hobby planer, and then sanded according to plan.

 

post-14181-0-04615300-1472447068_thumb.jpg

 

Then I tied blocks on the yards using the scale rope provided by the kits. I just did a simple overhand knot and a added dap of CA glue to secure the string on the block and on the yards. I think the scale of this model is rather small and seizing is not absolutely necessary.  I am satisfied with the result.

 

post-14181-0-89873700-1472447057_thumb.jpg

post-14181-0-90972800-1472447061_thumb.jpg

post-14181-0-97766200-1472447045_thumb.jpg

post-14181-0-44294900-1472447078_thumb.jpg

post-14181-0-13668900-1472447083_thumb.jpg

post-14181-0-78625800-1472447087_thumb.jpg

 

Here are the all three sets of yards for the masts. I also installed the handrails and extensions on the yards. 

 

post-14181-0-63538700-1472447112_thumb.jpg

post-14181-0-85040200-1472447117_thumb.jpg

post-14181-0-09529800-1472447125_thumb.jpg

 

Finally, I made this small string holder to facilitate my next step of rigging the ship.

 

post-14181-0-31231700-1472447073_thumb.jpg

 

 

Share this post


Link to post
Share on other sites

Looking good so far.

 

Bowsprit connection to fore deck ... be carefull! A lot of small forces from rope lines join there. I think simple qlueing will not be enough

 

Keep on with good work

Share this post


Link to post
Share on other sites

Hi 

Sorry to be so long in replaying as I have had to change my computer so needed to set up!

I have just received a part built model of the mary rose from someone who could not do the planking on the hull!

So wants me to finish it.I would be happy to send you plans as I go and don't need them

If you are ok with that please supply your address and will be happy to post them.

 

 

Share this post


Link to post
Share on other sites

Thank you sooo much.

I was out of all resources.

I'm not sure if you want my physical address (street and city ) or my email address.

Chuck Brinkman

453 kathleen dr. Newbury Park California 91320

 

Email ; f4targeteer453@gmail.com

 

I would be happy to repay any costs to you

 

Thanks again 

Chuck

Share this post


Link to post
Share on other sites

Hi chuck

I misread your request as I have made the cuttty sark but did not keep the plans.

I am now making the Mary rose by caldercraft and would be happy to send them to you as I go if they are any use to you.

Sorry for any misunderstanding  

Regards Roy

Share this post


Link to post
Share on other sites

Thank you sooo much.

I was out of all resources.

I'm not sure if you want my physical address (street and city ) or my email address.

Chuck Brinkman

453 kathleen dr. Newbury Park California 91320

 

Email ; f4targeteer453@gmail.com

 

I would be happy to repay any costs to you

 

Thanks again 

Chuck

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...