Jump to content

Pride of Baltimore II by Karleop - FINISHED - Model Shipways - 1:64


Recommended Posts

Hola mi amigo! Your attention to detail is excellent! Also excellent is your work in general. Me cae que sí! :)

 

Saludos

There aren't but two options: do it FAST, or do it RIGHT.

 

Current Project Build Log: Soleil Royal in 1/72. Kit by Artesania Latina.

Last finished projectsRoyal Ship Vasa 1628; French Vessel Royal Louis 1780. 1/90 Scale by Mamoli. 120 Cannons

 

Future projects already in my stash: Panart: San Felipe 1/75; OcCre: Santísima Trinidad 1/90;

Wish List: 1/64 Amati Victory, HMS Enterprise in 1/48 by CAF models.

 

So much to build, so little time!

 

 

Link to comment
Share on other sites

Hallo Nils:

 

Thanks for your words, specially considering you are really a MASTER in ship modeling.  I saw your  "SS Kaiser Wilhelm der Grosse" and let me without words!! Your work with wood and metal is astounding, probably you must consider writing a Book about Ship modeling. For sure I will be one of your readers.

 

Viele Grüße, Karl

Karl,

 

thank you very much for your compliment and your nice words, much appreciated...

 

Viele grüsse aus Glinde

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Hola:

 

Now I finished the three lockers that surround the main salon trunk: the Life Jacket locker, the Rope Locker and the Diesel Pump Parts Box.

 

Here some pictures:

 

attachicon.gifDSCN2639.JPGattachicon.gifDSCN2638.JPGattachicon.gifDSCN2637.JPGattachicon.gifDSCN2636.JPG

 

Saludos, Karl

Those sweet lockers look very nice Karl....

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Que tal Ulises:

 

Gracias!!  You are doing also an excellent work with your Royal Louis  :cheers:

 

Saludos, Karl

Link to comment
Share on other sites

Hi everybody:

 

After finishing the lockers I decided to follow with the lifeboat:

 

The most tricky part was to sand the interior because the kit comes with the "bread and butter"laser-cut lifts.  To accomplish this I glued only two of the lifts and before gluing another pair I carved and sanded the inner surface of the pairs. Nonetheless it is quite difficult to achieve a "perfect" soft interior.

post-797-0-94755100-1480522830_thumb.jpgpost-797-0-03868100-1480522827_thumb.jpgpost-797-0-63020000-1480522822_thumb.jpg

 

Here you can see some pictures of the finished boat:

post-797-0-86406900-1480522899_thumb.jpgpost-797-0-90047000-1480522903_thumb.jpg

 

The cradles:

 

post-797-0-74518900-1480523019_thumb.jpg

 

 

And the boat in it´s final position:

 

post-797-0-36729600-1480523008_thumb.jpgpost-797-0-12337500-1480523012_thumb.jpgpost-797-0-14355500-1480523016_thumb.jpg

 

Saludos, Karl

 

 

 

 

Link to comment
Share on other sites

Nice work on the boat Karl, your deck is quickly filling up

Link to comment
Share on other sites

Karl,

Your approach of shaping after each layer is a good idea. The lifeboat looks nice.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Hola:

 

A new update. I made the crew berthing and galley access trunk.  

 

post-797-0-09598300-1480899479_thumb.jpgpost-797-0-24522900-1480899482_thumb.jpg

 

The tricky part was the fire hydrant and hose because the Britannia part that comes with the kit makes it very difficult to add a hose. So I weld a couple of small brass nails simulating the hydrant.

 

post-797-0-30136200-1480899513_thumb.jpg

 

To simulate the hose I used a thin electronic wire:

 

post-797-0-40349900-1480899628_thumb.jpgpost-797-0-37069500-1480958743_thumb.jpgpost-797-0-99817200-1480958894_thumb.jpg

 

Saludos, Karl

 

Thanks for viewing and for all the likes

Edited by Karleop
Link to comment
Share on other sites

Hola Karl. Very clever your idea of the hydrant and the hoses. Good work!!!

There aren't but two options: do it FAST, or do it RIGHT.

 

Current Project Build Log: Soleil Royal in 1/72. Kit by Artesania Latina.

Last finished projectsRoyal Ship Vasa 1628; French Vessel Royal Louis 1780. 1/90 Scale by Mamoli. 120 Cannons

 

Future projects already in my stash: Panart: San Felipe 1/75; OcCre: Santísima Trinidad 1/90;

Wish List: 1/64 Amati Victory, HMS Enterprise in 1/48 by CAF models.

 

So much to build, so little time!

 

 

Link to comment
Share on other sites

Que tal Ulises:

 

  That is why it is always advisable to keep things that may be useful later.

 

Saludos Gracias!!

 

:cheers:

Link to comment
Share on other sites

Hola a Todos:

 

After more than a week here is a new update.  First I finished the two lockers that laid close to the Galley access:

 

post-797-0-89643800-1481499084_thumb.jpgpost-797-0-29347900-1481499140_thumb.jpg

 

Also I install the eyebolts and skylights that run along the deck:

 

post-797-0-67663300-1481499350_thumb.jpgpost-797-0-11117000-1481499355_thumb.jpg

 

Saludos, Karl

 

Link to comment
Share on other sites

  • 2 weeks later...

Hola amigos:

 

Almost finishing this year and almost finishing the deck fittings and structure, now with the Binnacle, the Wheel Box and the small Vent box:

 

post-797-0-94701100-1482254421_thumb.jpgpost-797-0-61586200-1482254493_thumb.jpgpost-797-0-77666300-1482254504_thumb.jpg

 

I want to take this opportunity to send my best wishes for this Christmas and wish you all an excellent 2017!!

 

:cheers:

 

Saludos Karl

Edited by Karleop
Link to comment
Share on other sites

Best wishes to you as well Karl

Link to comment
Share on other sites

  • 3 weeks later...

Hola a todos:

During the Holidays I had no much time to make some advances in my ship, nonetheless I finished some details:

 

After several tries I make the Step Pads using the Word program of my computer:

post-797-0-88221400-1483834516_thumb.jpgpost-797-0-95744700-1483834648_thumb.jpg

 

Also, some of the Bitts, the wood cleats to hang the Life rings and the Gun stowage blocks:

 

post-797-0-20224400-1483834827_thumb.jpg

 

The channels:

 

post-797-0-91200000-1483835100_thumb.jpg

 

The Cat Heads:

 

post-797-0-79134400-1483835151_thumb.jpg

 

The Steps:

 

post-797-0-36119300-1483835213_thumb.jpg

 

And finally, I varnished the Hull:

 

post-797-0-66578800-1483835296_thumb.jpg

 

Saludos, Karl

 

 

 

 

 

 

 

 

 

 

 

 

 

Edited by Karleop
Link to comment
Share on other sites

Karl, I like the deck work with the variations of color.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Karl,

 

Ola - Don't know how I missed this one -Did not want to stuff your inbox with likes - Nice project. I will follow along.

PS: Loved your weather deck planking work super well detailed

 

Cheers,

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Hi friends:

I am almost finishing the deck furniture (so many details!! :huh: ).  Now  there are the Fife Rails, including the winches:

 

post-797-0-36360200-1484505010_thumb.jpgpost-797-0-03533700-1484505020_thumb.jpgpost-797-0-83657600-1484505023_thumb.jpg

 

Saludos, Karl

 

 

Link to comment
Share on other sites

Hola:

 

Continuing with the last steps of the deck I installed the Gunports lids that must remain closed:

post-797-0-67655400-1485116150_thumb.jpgpost-797-0-37542100-1485116154_thumb.jpg

 

Also I fixed the rudder blade to the hull:

post-797-0-42517100-1485116279_thumb.jpg

 

Special mention deserve the cannons and carriages: If you try to follow the instructions you are dealing with an impossible task mainly because the gun tackles are out of proportion (compared with the instructions drawing) and there is no way to accommodate both tackles in the space provided, additionally the eyebolt position on the carriage is in wrong place, instead of being at the center it must be put a little behind the smaller trucks and in a vertical position: All of these changes can be seen in the real picture of the ship.

 

post-797-0-15232900-1485117469_thumb.jpgpost-797-0-27851100-1485117477.jpg

 

Here you can see the differences I talk about. The first two are according to the instructions and the other ones with the corrected position.

 

post-797-0-85599200-1485117502_thumb.jpgpost-797-0-40625400-1485117505_thumb.jpg

 

Final comment about the carriages: the brass rod provided to serve as the tackle rods are very thin and so I must to do them  filing toothpicks to the right size.

 

Saludos, Karl

Link to comment
Share on other sites

Hola;

Following with the cannons and carriages, apparently the problem was solved changing the eyebolts but that was not so. I tried to accommodate the cannons in its place but they do not look good, the reason: the blocks are out of scale and are to big (the correct size would be less than 5/64 instead the ones provided 3/32). So, instead of two blocks per side I remove one of them to get more space. They are not as they must be but they look better.

 

Here with the two blocks:

 

post-797-0-29175400-1485630213_thumb.jpg

 

Here with one block removed:

 

post-797-0-32776800-1485630209_thumb.jpg

 

Here you can see the difference of both

 

post-797-0-35027100-1485630217_thumb.jpg

 

Saludos, Karl

 

Link to comment
Share on other sites

Hi everyone!!

 

After almost seven months, finally I finished all the deck furniture and glue them in their proper place. Here some pictures:

 

post-797-0-06379800-1486239248_thumb.jpgpost-797-0-27092400-1486239251_thumb.jpgpost-797-0-40445800-1486239253_thumb.jpgpost-797-0-10998600-1486239257_thumb.jpgpost-797-0-28450800-1486239261_thumb.jpgpost-797-0-79541400-1486239265_thumb.jpgpost-797-0-87926300-1486239269_thumb.jpgpost-797-0-06460800-1486239274_thumb.jpgpost-797-0-66491500-1486239277_thumb.jpg

 

Next step, start with the masts.

 

Saludos, Karl

 

 

 

 

Link to comment
Share on other sites

Hola;

Following with the cannons and carriages, apparently the problem was solved changing the eyebolts but that was not so. I tried to accommodate the cannons in its place but they do not look good, the reason: the blocks are out of scale and are to big (the correct size would be less than 5/64 instead the ones provided 3/32). So, instead of two blocks per side I remove one of them to get more space. They are not as they must be but they look better.

 

 

And... now you know why I immediately throw all the kit blocks in the garbage and use whatever size looks correct from Syren.  :)

 

The deck is looking great with all the furniture on it Karl.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...