Jump to content

Mare Nostrum 1/35 by Steve 12345 FINISHED - Artesania Latina


Recommended Posts

haven't started the fish box thingies yet harry key to them will be consistency that will be a good point for me to show how to use the proxon safely and efficiently not to show granny how to suck eggs but one follower has already purchased the proxen on my advice and I want to teach even a small table saw deserves respect

I can show a few simple tips trust me this is because ive made all the mistakes on the full size

 

 

Link to comment
Share on other sites

I found with the spray laquer im using harry on the wheel house when I had to glue small parts on the roof with ca cause id already applied finish it left a small sort of clouded affect I was almost gonna rebuild but then I tried spraying a small amount into the spray can plastic lid and appling with a brush the clouded effect disappeared I feel that will work for using ca on the fish boxes however I do like your idea of pinning

 

 

Link to comment
Share on other sites

Yup, Thanks Steve,

All Power Tools deserve that respect.

After my first few goes with the Small Proxxon, I managed to cut into the end of my right Index Finger, believe me, it cut really quickly!!

The Kerf is very fine, so compression and a week of Band Aids, all good.

(I now use "Push Sticks" whenever possible.)

 

I too have the Full sized machinery for Cabinet work, Etc. (I want to keep my Fingers firmly attached thank you. :))

 

Cheers....HOF.

Completed Builds:

 

A/L Bluenose II

A/L Mare Nostrum

Sergal/Mantua Cutty Sark

A/L Pen Duick

A/L Fulgaro

Amati/Partworks 1/200 Bismarck

A/L Sanson

Link to comment
Share on other sites

Steve, what's your next model? 

Derek

If you want to build a ship, don't drum up the men to gather wood, divide the work and give orders. Instead, teach them to yearn for the vast and endless sea  

Antoine de Saint Exupery

 

Current Builds

Bluenose - Model Shipways - 1:64 Scale

Fair American - Model Shipways - 1:48 Scale

HMS Winchelsea 1764 - Group Build

On Deck

Guns of History Naval Smoothbore Deck Gun - 1:24 Scale

Finished Builds

Mare Nostrum - Artesania Latina - 1:35 Scale

Guns of History Carronade - Model Shipways - 1:24 Scale

 

Member of the Nautical Research Guild

 

Link to comment
Share on other sites

Quick question hof looking back over the log in the pictures you supplied in page 1 I notice you fitted the handrails before the inner bulwark uprights did you find that made the process easier than fitting the uprights then trying to cut flush at correct angle

 

 

Link to comment
Share on other sites

Hi Steve,

Yes I did.... :)

Did it make it easier? I don't recall but I must have had a reason for it at the time.

 

Have I helped? (Probably not)

 

Cheers....HOF.

Completed Builds:

 

A/L Bluenose II

A/L Mare Nostrum

Sergal/Mantua Cutty Sark

A/L Pen Duick

A/L Fulgaro

Amati/Partworks 1/200 Bismarck

A/L Sanson

Link to comment
Share on other sites

Giving it some thought fitting the hand rail first would mean you get the advantage of fitting each upright one at a time fine tuning as required

 

I've put some thought into it I'm not impressed with the kit recommendations the handrail doesn't meet it just butts against the keel leaving an ugly space between

I think I will recess the two handrails in so they meet also I don't like how the uprights prutred the hand rails the kit calls for 3mm x 3mm ill will use 3mm x 2mm

 

I think I will fit the three by two uprights first then try the modified handrail using the ply wood originals and see how that works

I'll post pics tomo night with how it turns out

Edited by Steve 12345

 

 

Link to comment
Share on other sites

Very sharp!

Doug

Current BuildsBluenose II - AKrabbenkutter / Prince de Neufchatel / Essex Cross-section / Syren / Barque Stefano / Winchelsea / Half Hull / Maria HF31 - Dusek / Bandirma - Turkmodel

On the Shelf: Santisima Trinidad and Cross Section / HMS Cutter Alert / Tender AVOS / Confederacy

Suspended Build: Bluenose II - Billing Boats Nr 600 

Link to comment
Share on other sites

Looking really good.

Derek

If you want to build a ship, don't drum up the men to gather wood, divide the work and give orders. Instead, teach them to yearn for the vast and endless sea  

Antoine de Saint Exupery

 

Current Builds

Bluenose - Model Shipways - 1:64 Scale

Fair American - Model Shipways - 1:48 Scale

HMS Winchelsea 1764 - Group Build

On Deck

Guns of History Naval Smoothbore Deck Gun - 1:24 Scale

Finished Builds

Mare Nostrum - Artesania Latina - 1:35 Scale

Guns of History Carronade - Model Shipways - 1:24 Scale

 

Member of the Nautical Research Guild

 

Link to comment
Share on other sites

I'm thinking I'm going to run into the same problem.  They certainly weren't generous with material.  I find I'm constantly going into my scrap pile to find off-cuts to use.  I'll let you know if I get there before you.

Derek

If you want to build a ship, don't drum up the men to gather wood, divide the work and give orders. Instead, teach them to yearn for the vast and endless sea  

Antoine de Saint Exupery

 

Current Builds

Bluenose - Model Shipways - 1:64 Scale

Fair American - Model Shipways - 1:48 Scale

HMS Winchelsea 1764 - Group Build

On Deck

Guns of History Naval Smoothbore Deck Gun - 1:24 Scale

Finished Builds

Mare Nostrum - Artesania Latina - 1:35 Scale

Guns of History Carronade - Model Shipways - 1:24 Scale

 

Member of the Nautical Research Guild

 

Link to comment
Share on other sites

Nice work Steve.

Regarding Rigging material, I didn't have any issues of quantity, but, this was prior to the A/L downgrade of course.

 

Cheers....HOF.

Completed Builds:

 

A/L Bluenose II

A/L Mare Nostrum

Sergal/Mantua Cutty Sark

A/L Pen Duick

A/L Fulgaro

Amati/Partworks 1/200 Bismarck

A/L Sanson

Link to comment
Share on other sites

Hi Chap,

Regarding the Rigging for this, there's sod all in the Grand Scheme of things.

Shrouds/Ratlines, a few Backstays, Winch Lines and a few Coils of "Rope" on Deck. (My build anyway)

I used Wire for the Antenna Stuff.

 

(Incidentally, I am almost out of 0.25mm "Beige" for the PD but have a reasonable supply at hand "Post" Cutty Sark build. I intend to try my best to keep up the resources I have to hand. :) )

 

Cheers....HOF.

Completed Builds:

 

A/L Bluenose II

A/L Mare Nostrum

Sergal/Mantua Cutty Sark

A/L Pen Duick

A/L Fulgaro

Amati/Partworks 1/200 Bismarck

A/L Sanson

Link to comment
Share on other sites

Your not wasting any time with this build. Very nice work.

Derek

If you want to build a ship, don't drum up the men to gather wood, divide the work and give orders. Instead, teach them to yearn for the vast and endless sea  

Antoine de Saint Exupery

 

Current Builds

Bluenose - Model Shipways - 1:64 Scale

Fair American - Model Shipways - 1:48 Scale

HMS Winchelsea 1764 - Group Build

On Deck

Guns of History Naval Smoothbore Deck Gun - 1:24 Scale

Finished Builds

Mare Nostrum - Artesania Latina - 1:35 Scale

Guns of History Carronade - Model Shipways - 1:24 Scale

 

Member of the Nautical Research Guild

 

Link to comment
Share on other sites

Nice Work Chap,

Both Derick and yourself.

(Parallel Builds)

 

Cheers....HOF.

Completed Builds:

 

A/L Bluenose II

A/L Mare Nostrum

Sergal/Mantua Cutty Sark

A/L Pen Duick

A/L Fulgaro

Amati/Partworks 1/200 Bismarck

A/L Sanson

Link to comment
Share on other sites

Looks fantastic...but if I may suggest...try using some bees wax on your lines...it covers up all those frizzies and smooth's out the line.  Cotton line is notorious for frizzing.

 

Super attention to clean detail....

 

Rob

Current build:

Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196

 

 

Finished build:

Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/#

 

Current build(On hold):

Build log: 1/96  Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/

 

Completed build:  http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/

The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts."

Link to comment
Share on other sites

Steve, would you mind telling me how you did your rat lines.  I'm at that stage right now and haven't figured out how to tackle them.

Derek

If you want to build a ship, don't drum up the men to gather wood, divide the work and give orders. Instead, teach them to yearn for the vast and endless sea  

Antoine de Saint Exupery

 

Current Builds

Bluenose - Model Shipways - 1:64 Scale

Fair American - Model Shipways - 1:48 Scale

HMS Winchelsea 1764 - Group Build

On Deck

Guns of History Naval Smoothbore Deck Gun - 1:24 Scale

Finished Builds

Mare Nostrum - Artesania Latina - 1:35 Scale

Guns of History Carronade - Model Shipways - 1:24 Scale

 

Member of the Nautical Research Guild

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...