Mirabell61 Posted August 3, 2017 Share #61 Posted August 3, 2017 Hi Karl, can it be that your PM message store is full (persönl. Mitteilungsspeicher voll ?) I tried twice already in vain to ask you a question by PM.... Cheers, Nils mtaylor and malachy 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Jack H Posted August 3, 2017 Share #62 Posted August 3, 2017 Great. Are you going to make the two parts separately and then merge it into one shipmodel? mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted August 10, 2017 Author Share #63 Posted August 10, 2017 Hello, thanks to all. hjx No, only the rear part is provided. No fusion. Karl archjofo, tadheus, Amalio and 3 others 6 Quote Link to comment Share on other sites More sharing options...
jose_b Posted August 23, 2017 Share #64 Posted August 23, 2017 I've just discovered this topic. With your permission, I take a seat. Amazing work! Archi and mtaylor 2 Quote Building Le François: http://modelshipworld.com/index.php/topic/9952-le-fran%C3%A7ois-by-jose-scale-1-48-1683/ Link to comment Share on other sites More sharing options...
Jeronimo Posted August 31, 2017 Author Share #65 Posted August 31, 2017 Hello friends, I had a terrible surprise after the holiday in my workshop. A small water damage had destroyed my model in time. Frames and planks, all skewed and oblique. No more save. After numeros curses and frustation, the result: " New construction of the model ". A German proverb is: all good things are three. Hallo Freunde, eine schlimme Überraschung hatte ich nach dem Urlaub in meiner Werkstatt. Ein kleiner Wasserschaden hatte in der Zeit mein Modell zerstört. Spanten und Planken , alles verzogen und schief. Nicht mehr zu retten. Nach zahllosen Flüchen und Frustabbau, Folge daraus: "Neubau des Modelles". Ein deutsches Sprichwort lautet: Alle guten Dinge sind drei. Karl PART 1 iosto, Mirabell61, Captain Poison and 19 others 22 Quote Link to comment Share on other sites More sharing options...
dvm27 Posted August 31, 2017 Share #66 Posted August 31, 2017 I'm so sorry about your setback, Karl! Most people wouldn't have the heart to jump right back in with a replacement build but you have certainly done so. In the medical profession we usually say "bad things come in threes". I like the German proverb better. mtaylor, John Allen and Tigersteve 3 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752 Link to comment Share on other sites More sharing options...
Mau Posted August 31, 2017 Share #67 Posted August 31, 2017 Hi Karl, What a pity. I sympathize with you. I hope only this model has been damaged. Good luck with the rebuilding. Regards Mauricio Tigersteve, mtaylor and John Allen 3 Quote Link to comment Share on other sites More sharing options...
druxey Posted August 31, 2017 Share #68 Posted August 31, 2017 I'm terribly sorry to read of your workshop disaster, Karl. But, a phoenix will arise from the ashes. Except it was water, not fire in this case. John Allen and mtaylor 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv Link to comment Share on other sites More sharing options...
BANYAN Posted September 1, 2017 Share #69 Posted September 1, 2017 (edited) Sorry to hear about the water damage Karl; but I bet the new version will be even better. Any salvageable parts to save a little time? cheers Pat Edited October 11, 2017 by BANYAN John Allen and mtaylor 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
ChrisLBren Posted September 1, 2017 Share #70 Posted September 1, 2017 Hey Karl, Sorry to hear about the damage in your workshop - the new version is sure to be better than the original. Im a huge fan of your work. Best, mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Gaetan Bordeleau Posted September 1, 2017 Share #71 Posted September 1, 2017 Hi Karl, Chris is right: with the practice of the first one, the result of the second one will be a masterpiece. mtaylor and John Allen 2 Quote Link to comment Share on other sites More sharing options...
jose_b Posted September 1, 2017 Share #72 Posted September 1, 2017 I agree with Chris and Gaetan: this second atempt will be better. mtaylor 1 Quote Building Le François: http://modelshipworld.com/index.php/topic/9952-le-fran%C3%A7ois-by-jose-scale-1-48-1683/ Link to comment Share on other sites More sharing options...
Dilbert55 Posted September 1, 2017 Share #73 Posted September 1, 2017 (edited) Did you use lasers to validate your hull jig or was it all based on 2D drawings / measurement? Edited September 1, 2017 by Dilbert55 mtaylor 1 Quote Link to comment Share on other sites More sharing options...
archjofo Posted September 2, 2017 Share #74 Posted September 2, 2017 Hi Karl, your wood frame work is remarkably good.I admire this. mtaylor 1 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com Link to comment Share on other sites More sharing options...
Mirabell61 Posted September 2, 2017 Share #75 Posted September 2, 2017 Hi Karl, sorry to hear of the damage and the related give up of the model... are you again going for 1:36 scale and for the aft half only ?. Wish you all the best with the third run for it... Nils mtaylor and Angarfather 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Jeronimo Posted September 2, 2017 Author Share #76 Posted September 2, 2017 Thanks to all for the comforting and encouraging words. Karl mtaylor and Mirabell61 2 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted September 2, 2017 Author Share #77 Posted September 2, 2017 18 hours ago, Dilbert55 said: Did you use lasers to validate your hull jig or was it all based on 2D drawings / measurement? No laser, measurements and straightening cord tensioned. Karl Lord Nelson 59 and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted September 2, 2017 Author Share #78 Posted September 2, 2017 7 hours ago, Mirabell61 said: Hi Karl, sorry to hear of the damage and the related give up of the model... are you again going for 1:36 scale and for the aft half only ?. Wish you all the best with the third run for it... Nils Hi Nils, everything as usal, scale 1:36, rear half of the ship. Karl Mirabell61, mtaylor and Lord Nelson 59 3 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted September 15, 2017 Author Share #79 Posted September 15, 2017 (edited) Hi friends. Thanks to all for the kind comments. The stern prepared. Karl Part 2 Edited September 16, 2017 by Jeronimo matiz, hexnut, ulrich and 22 others 25 Quote Link to comment Share on other sites More sharing options...
Mirabell61 Posted September 15, 2017 Share #80 Posted September 15, 2017 Super work Karl, obviously you`re right back on the track again... Nils cog and mtaylor 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
mtaylor Posted October 9, 2017 Share #81 Posted October 9, 2017 Maybe it's me but the pictures didn't come through. BANYAN, davyboy, jose_b and 1 other 4 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
BANYAN Posted October 9, 2017 Share #82 Posted October 9, 2017 Ditto davyboy and mtaylor 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
Jeronimo Posted October 24, 2017 Author Share #83 Posted October 24, 2017 (edited) The rear frames are mounted. Karl PART 3 Edited October 24, 2017 by Jeronimo kees de mol, druxey, hexnut and 27 others 30 Quote Link to comment Share on other sites More sharing options...
albert Posted October 24, 2017 Share #84 Posted October 24, 2017 Hi Jeronimo, very beautiful work. Jeronimo and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
EdT Posted October 24, 2017 Share #85 Posted October 24, 2017 Superb work as always, Karl. Ed mtaylor, Jeronimo and Mirabell61 3 Quote All EdT posted material Copyright 2016 Edward J Tosti Young America - extreme clipper 1853 Young America POB Version Modeling the Extreme Clipper Young America Vol 1 1:60 HMS Naiad 1797 The Naiad Frigate Vol I The Naiad Frigate Vol II1:96 Victory Link to comment Share on other sites More sharing options...
BANYAN Posted October 24, 2017 Share #86 Posted October 24, 2017 Great finish Karl - you never disappoint with the quality of your work. cheers Pat mtaylor and Jeronimo 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
archjofo Posted October 28, 2017 Share #87 Posted October 28, 2017 Hello Karl,a really extremely precise detail work.I'm excited. mtaylor and Jeronimo 2 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com Link to comment Share on other sites More sharing options...
BANYAN Posted November 3, 2017 Share #88 Posted November 3, 2017 No images showing - is it just me? cheers Pat mtaylor 1 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
G.L. Posted November 3, 2017 Share #89 Posted November 3, 2017 No, I do not see them as well. G.L. mtaylor 1 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
Bluto 1790 Posted November 3, 2017 Share #90 Posted November 3, 2017 I'm not seeing them either. Karl ~ we REALLY DO need to see your fantastic photos !!! mtaylor 1 Quote Jim. I cut it twice . . . . . and it's still too short! HMS Leopard 1790; scratch build 1:80 PoB Cross Section - HMS Leopard 1790 - 1:44 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.