Jump to content
Dan_L

Another rookie has joined

Recommended Posts

Hi everyone. I've been lurking and reading old threads for a while and thought it was time to register and say hello. My name is Dan, I'm 58 and live in the Dallas, TX area.

 

I've built several kinds of plastic models at various stages in my life but always wanted to try making a wooden model ship. I recently found out that a coworker is a model ship builder and after talking to him and seeing his work it brought the urge back and I decided to finally give it a shot. My first thought was to dive into the deep end with a complicated build like the Constitution, but common sense prevailed and my first attempt will be the solid hull model Phantom that I got from Model Expo.

 

I haven't actually started the build yet, I've been reading a lot about the hobby in general and the Phantom in particular. I think I'm about ready to start work now so I've got the model kit, a starter tool kit, a printed copy of Chuck Passaro's practicum and my working area kind of organized so I am going to start on the hull shaping today. I'm not that confident with my carving ability so my dremmel will probably be used a lot and hopefully I won't have to use filler to fix to many mistakes.

 

I'm sure I'll have some stupid rookie questions so please bare with me and wish me luck.

 

Dan

 

Share this post


Link to post
Share on other sites

Hello Dan and welcome aboard.

 

It doesn't matter if you're a beginner or an advanced builder, this is a great place to learn and share tips and techniques.

When you're ready, feel free to start a buildlog.

If needed, you'll find plenty of advise, help and encouragement from everyone.

 

And remember, the only stupid questions are the ones that you don't ask.

 

I wish you smooth sailing with our gallant crew.

 

Regards,

Anja

Edited by Anja

Share this post


Link to post
Share on other sites

Hello Dan. We all started with the first kit. ;)

 

There are several horror stories about starting with an advanced kit as a first project. ( I have my own) so your change in direction from the Connie to the Phantom is a wise move. It will tell you if you have what it takes to tackle the Constitution or Victory in the future. :)

 

My best wishes in your project.

Don't be afraid or shy to ask questions.

Share this post


Link to post
Share on other sites

Welcome to MSW Dan! Great choice to go with the Phantom. That model will give you opportunity to learn many of the basic skills and set you up well to move onto bigger and more complicated builds. Best of luck to you on your first wooden ship build. I look forward to seeing your work!

Share this post


Link to post
Share on other sites

Thanks for the warm welcome.

 

Well, it didn't take long to run into my first snag on my first build. I had read that the supplied templates didn't match the plans for the ship and that is true for my Phantom kit also. I'm just going to get some tracing paper and make another set of templates to the exact size of the plans. Even with the templates being off though I can tell that there is going to be a LOT of carving on my hull. The stern isn't too bad but the bow is way off and I'm not looking forward to that much of a challenge right from the start.

 

post-28119-0-34389100-1487021061.jpg

Share this post


Link to post
Share on other sites

Dan,

You really should start up a build log under the model ship kits section here.

It helps to keep all the logs in the same place and you will get better answers to your questions in there. When you get it going we will follow. There is a post at the very top of the page that gives instructions for setting up your log.

 

While you are here though I will say that that Dremel and a bottle of wood filler will become your friends along with lots of sand paper. The effort is worth the pain though so hang in there and push through.

 

One of our members, Elijah, is almost done with his Phantom. He had similar problems when he started his too, so you might want to take a look at his log and see what he did or even just ask him as he has recent first hand experience with it. His log is here.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...