Jump to content

Recommended Posts

Ok, here's a quickie reboot of my Bismarck thread as requested:

 

CIMG4945_zps3cc850d6.jpg

 

At the moment this is jut about the biggest, scariest (in more ways than one!) chunk of plastic that you can pick off the shelf at your local Rob-E-shop.  Here's the hull next to a 1/350 Tirpiz (Bismarck's sister-ship):

 

CIMG4949_zps7294d1dd.jpg

 

The kit is fairly impressive "out of the box" but it has it's problems. The first thing that worried me about the kit was the sorry shape of the porthole molds. Trumpeter molded all the portholes straight on the broadside angle and also molded the major superstruture pieces whole, rather like lego blocks

 

This means that every porthole on the hull that is not directly broadside is warped. For example:

 

CIMG6443_zpsb19850ed.jpg

 

CIMG4966_zps7324dc8b.jpg

 

There are plenty of curves on this ship... which means a awful lot of portholes to fix.

 

The hull is also extremely thick plastic... great for strength and stability but after drilling out the portholes it made them look like little round cave openings instead of ports. This was my first attempt to fix the warped portholes with putty and drilling; it did't turn out the way I wanted.

 

CIMG5145_zpsf32bd84d.jpg

 

Also, it turns out the hull shape is wrong below the waterline and has too much of a "banana" shape to it which makes painting a waterline and boot top a bit challenging as it is not marked off with scribing or raised lines like most plastic ship models.

 

More to come...

Edited by channell
Link to post
Share on other sites

My solution to the porthole issue was to descend into porthole hell for a couple of months.

:o

 

I replaced all but 1 or 2 of portholes on the hull and superstructure by drilling out a "perfect porthole" into very thin styrene card and inletting them into the hull and carefully blending them into the surrounding material:

 

CIMG5152_zps34c3a3a3.jpg

 

CIMG5154_zps53c41e8d.jpg

 

CIMG5156_zps4bbcced1.jpg

 

CIMG5151_zps8090c04e.jpg

 

CIMG5469_zps9e6c9df9.jpg

 

CIMG5652_zpsbe9920e4.jpg

 

Anyway, it was too much work and a serious PITA to get them all straight and clean but it was ultimately worth it:

 

CIMG5639_zps139da3c4.jpg

 

CIMG5324_zpse03bf93c.jpg

 

On the hull I replaced the porthole eyebrows and added the bar steps with very thin copper wire. Later on I got the KA Models Mk1 detail set which has all that and more already included as PE.

Edited by channell
Link to post
Share on other sites

I added a strip of thin styrene along the top of the the hull to replicate the 45 degree angle of the top of the armor belt (and raise the edges to match the level of an additional wood deck)

 

After that I got to work on the main and secondary guns.

 

CIMG5279_zps88cf1185.jpg

 

CIMG5274_zps3e284a85.jpg

 

CIMG5273_zps3283d5e1.jpg

 

CIMG5275_zps043297d2.jpg

 

CIMG5276_zpsd09b1978.jpg

 

CIMG5277_zps1d8b412b.jpg

 

The various rails are included with the kit and really make the guns look great... not fun to put on though!

Link to post
Share on other sites

Next I painted the hull:

 

CIMG5754_zps384eff94.jpg

 

CIMG5753_zpsf7d6bf68.jpg

 

CIMG5750_zpsa546efc2.jpg

 

Trumpeter gave absolutely no indication of where to put the waterline on the boat so I gave it my best guess while looking at historic pics. I scribed a waterline around the hull by placing it weighed down on a large smooth surface, taping a fine pen to an upside down cup (and shimmed to height) and runing a line around the hull. As you can see, it's wrong on the stern even though it was right at the bow. To make it work I warped the black boot top to match the correct height on the bow and stern; thanks to the size of the thing you just can't tell by looking at it!

 

CIMG5773_zps7fd06f92.jpg

 

CIMG5775_zps441e06f9.jpg

 

I also started on a hefty oak base to display the beast:

 

CIMG5835_zps02d57ea4.jpg

 

CIMG5837_zpsab12826c.jpg

 

CIMG5838_zps9b94fb80.jpg

Edited by channell
Link to post
Share on other sites

...orginally I planned to hand-plank the deck with tiny wood strips but luckily I briefly returned to a state of sanity and bought a detail set that had a great deck already:

 

CIMG5657_zps936496ba.jpg

 

I don't usually like "stick-on" decks but this one was really not that bad! It's high quality and the larger scale helps mitigate the negative aspects of such a deck:

 

CIMG5940_zps58faa285.jpg

 

CIMG5942_zpsc69a9309.jpg

 

CIMG6177_zps7117cdfd.jpg

 

CIMG6178_zpsf2d33cd7.jpg

 

CIMG6184_zps252f4159.jpg

 

CIMG6187_zps3edac567.jpg

Link to post
Share on other sites

My latest piece of work invoved starting to rebuild the superstructure on the maindeck after I had previously sanded off all the molded detail and replaced the portholes:

 

CIMG6440_zpsb1e88295.jpg

 

... and starting to add all the "fiddly bits" to the funnel:

 

CIMG6439_zps4f020c68.jpg

 

CIMG6437_zps388bfb2e.jpg

 

And just when everyone thought I couldn't possibly be having any more fun I found myself sinning again ;) :

 

CIMG6428_zps475388c8.jpg

 

To Trumpter, your most loyal and spend-crazy customer. Please give me a 1/200 USS Missouri as well... soon, but not TOO soon! :bird-vi:

Edited by channell
Link to post
Share on other sites
  • 1 month later...

Here's a quick update, sorry I haven't been quite so dedicated in keeping this thread going:

 

CIMG7447_zps645360c0.jpg

 

CIMG7446_zpsc08eab4f.jpg

 

CIMG7445_zps8203acad.jpg

 

The standard kit has around 1700 parts but that's just not enough so I at least doubled that with aftermarket photo etch! At least the "groundwork" is pretty much done; most of what's left is attaching all the brass "fiddly bits" and painting.

Link to post
Share on other sites

Hi Channel,

 

I just caught up on your build log. Wow, your attention to detail is really showing. Very interesting project, to be sure. It will be very cool to see Bismark and Arizona side by each and compare their different designs

 

Keep up the excellent work!

 

Peter

Edited by petervisser
Link to post
Share on other sites
  • 1 month later...

Progress update:

 

CIMG8121_zps147db4cc.jpg

 

CIMG8122_zps788a16fc.jpg

 

CIMG8123_zps23ad9a78.jpg

 

CIMG8124_zps1ccdd35c.jpg

 

CIMG8125_zps2f248dca.jpg

 

Instead of doing this the smart way and focusing on specific areas start to finish and/or following the instructions,  my Bismarck is "growing" rather organically across the entire ship. Every week it's sprouting new parts, paint and modifications all over the superstructure, depending on what part I feel like working on that day... and damn there are a lot of little parts to put on this thing!

 

I had troubles getting the black "baseboard" to look good; I finally resorted to (hopefully) permanent black pinstriping tape. Thankfully I finished the last porthole replacement yesterday and cut out the windows of the admiral's bridge, which means I am finally done with my modifications and the hard part is over!

 

Until next time...

Edited by channell
Link to post
Share on other sites
  • 1 month later...
  • 3 weeks later...

Just happen to see these while looking at other plastic ships here. A friend just bought this kit and my first thought after looking at the hull was holy crap...where will one put this once its finish but at the same token I'm seriously thinking about getting the 1/200 Aircraft carrier. I just read that Trumpeter announced at the Nationals that they will be coming out with WW2 USS Enterprise. I'm torn between it or Hornet. Well, see what happens.

 

You are doing awesome work on her. I really enjoy the extra effort you are putting into it with all those PE detail. It sure will be a show stopper for sure. Keep up the good work... B)

Link to post
Share on other sites

Thanks everyone for the comments!

 

Kevin- I am using the KA Models Mk1 superset and Eduard PE; there are plently of duplicates but they do compliment each other fairly well; the Eduard set contains many details KA missed and vice-versa.

 

Foremast- I am airbrushing the superstructure with Model Master "Lichtrgrau" acryl and steel decks with Tamiya medium grey. The hull above the waterline is rattlecan Model master "Navy agressor grey" and below is Tamiya Guards Red (I think).

 

I have still been puttering along with her; I got the docking wings on along with may other details (with plenty more to go!)

 

zWdqK38.jpg

 

y4wZYFl.jpg

 

I also am about 2/3rds through building all the AA guns:

 

rFFCdXC.jpg

 

7ipfHrn.jpg

 

vg58qeh.jpg

Edited by channell
Link to post
Share on other sites

just read your log, im impressed, it's a shame that with all the extras that can be added,  they cannot get the basics right - like portholes, - well done,

 

Yea, Trumpeter is a bit infamous for stuff like that. Luckily (with a little bit of patience) the porthole problem can be fixed. At this point in the build I am glad I took the extra time to do it... I think it really makes a difference on the (almost) finished product.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...