Jump to content
MarcM

Masts and spars off-site ?

Recommended Posts

Hi riggers,

 

Did someone tried this already ?

 

I have the idea of constructing and assembling the masts and spars off-site. 

I mean: putting the shrouds over the mastheads, but let them hang loose. Putting the assembled spars with furled sails onto the masts, etc.

And then, later on, installing the completely assembled masts on the ship, tensioning the shrouds, etc

 

It would be much easier to handle all those bits and pieces.

 

I would be grateful for all the input of the local experts.

Share this post


Link to post
Share on other sites

Hi Marc

I've seen a couple logs where the builder has done the spars off the masts (not sure which ones, but I think BE did in his Pegasus log). I think you might find the spats will get in the way when you start on the lower shrouds and all the stays. Could be interesting to see in action though. 

 

Others are probably more knowledgeable on this subject than I, so feel free to correct if I'm wrong.

Share this post


Link to post
Share on other sites

From "Ship Modeling Simplified" by Frank Mastini, page 77, "Before we step the masts. we'll attach all the necessary rigging".

 

That is exactly what I have done for the 9 ships I have built and cannot imagine doing it any other way.  I tie the blocks and lines onto the yards, then put the yards onto the masts and install as many lines as are possible, labeling them and letting them hang loose.  Agreed, it looks a mess when the masts are finally stepped however I am convinced it is a lot easier to do as much as is possible off the ship rather than after the masts are in place.

 

Paul

Share this post


Link to post
Share on other sites

 Theoretically I like the idea of rigging everything off ship. However, I find my mind just doesn't work like that. I end up rigging everything on ship. For me that is what works. Everyone has a different method. Fore to aft, aft to fore, bottom to top, etc. 

 

You just have to see what works. You will find your groove as you rig.

 

Share this post


Link to post
Share on other sites

Hello Marc

 

I am presently working the Constitution. I am assembling my masts, yards, and rigging the way you are suggesting. The Constitution has three masts, some gaffs, and the bowsprit. I have install as much of the rigging as I can off the model. I have a great deal of blocks, eyebolts, bullseyes, and thimbles  to rig. Off the mast assembly seems to work for me. I just can't imagine trying to to it all on the model. For my rigging I am using all cotton line made on the Byrnes ropewalk. My line is glued with diluted white glue. That way if a make a mistakes, all I have to do is wet, and untie the knots. Feel free to check out my build log. Xken is also rigging his Constitution the same way. Hope this helps. 

 

 

Share this post


Link to post
Share on other sites

Hi Marc,

 

I'm glad I found this post of yours. I've just recently arrived at the masting and rigging stage of my build and have been trying to think of all the difficulties that lie ahead if I go ahead and fit something 'now' that should be fitted 'later' and vice versa.

I've already made the mizzen lower and topmast and the main lower and topmast and when I look at them in position (they're just loose, not secured yet) and visualise all of the shrouds in position I just can't think how I would be able to fit the yards . . . so I'll definitely be fitting as much as possible 'off ship' before stepping the masts.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...