Jump to content

Hanseatic ship c. 1500 by goetzi73 - 1:50 - first scratch build


Recommended Posts

I've been using this site as a source for inspiration for more than a year now (certainly too late for the first steps of this build). So my wife thought it would be an good idea to share it.

 

I don't think it will be one of the numerous excellent builds in this forum, but hopefully i will get advice if I'am steering towards an iceberg.

Nevertheless, as my teachers in school said, it's always enough for a good laugh.

 

On to the start. This will be am birthday present for my sisters 40th birthday in two years. So I started 7 years ago.

As we come from the hometown of the hanse - Lübeck - it has to be an hanseatic ship. My father provided me with plans, he got from a navy collegue. 

After visiting several museums, I learned, that the general shape of the ships was similar. Other details, like amount  of armament, etc. on the other side could be very different.

According to the plans, it's not a cog, but the follow up a Kraweel.

 

Here's an nice drawing from the reconstruction of a 1:1 replica

 

592a9efa3a027_planklein.jpg.02bbea9d49591e7e000d9e30a11f492a.jpg

 

More will follow the next days.

 

 

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

Very interesting Goetzi! This is a period and type of ship I'm very interested in. It is a little later than Woodrat's carrack or Nave Tonda, which you can also see in the scratch built forum. Though Venetian ships had many differences from those of the north, there were also great similarities. The main difference from carracks I can see from a brief glance is that yours is flat sterned, while those of carracks were round. The flat stern was just coming in about this time, and went on to be the dominant form for two centuries. I'd recommend you have a look through Woodrat's excellent build log - he's done a huge amount of research into ships of this period and you may pick up some valuable information.

 

Some time ago I put up some links about vessels of this period at 

and 

and 

which I hope you you might find useful. Not only the shape of the ship itself, but very valuable images of artefacts etc.

 

Looking forward to following your build!

 

Steven

Link to comment
Share on other sites

  • 2 weeks later...

Dear Steven,

thanks a lot for the information. That will be a good source for information, especially on details, as these are only sparse information in the plans.

Sorry for the delayed reply, but at work there occurred some unforeseeable incidents. That prevented me from doing anything else.
I also have an interesting link for you:

http://hanseschiff-luebeck.de/projekte/das-hanseschiff/wissenswertes/nachbau-ohne-vorbild/

It’s in german, but maybe google translator creates some useful text out of it - or it will be that japanese manual style...

So the main problem is, that there are no ship wrecks of this type of ship. The known wrecks are of the earlier period. So the plans were a result of experimental archeology.

 

 

Götz

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

Hi Götz,

 

My German isn't good enough to read this site without help, but Google translate is pretty good - you can usually work out what it's supposed to say!

 

Thanks for this information. I'd heard of the Hanse ports, but not of a kraweel.

 

Yes, the Lomellina is contemporary and the Mary Rose is only a few decades different, but neither of them are Hanse ships, and it's pretty certain that there were major differences in building techniques and design between Hanse and other shipbuilders.

 

knorre1493.jpg?w=300&h=272800px-Stadtrecht_seefahrt.jpg

 

I found these on the Net. They appear to be from about the right time frame The second is from Hamburg and the first has architecture reminiscent of Du"rer's pictures of German buildings (though they could equally be Dutch or Scandinavian). The ships in both have round sterns, unlike yours, but certainly by 1510 when the Mary Rose was laid down, flat sterns were in use. There vis also the flat-sterned ship on the front cover of Johann Geiler von Kayserberg’s  Navicula Penitentie of 1511 here,

 

Photo

and also you could do an image search on "ship of fools" for quite a few German examples of ships from the turn of the 16th century - some quite similar to your own, others with at least details that might be of use to you.

 

Image result for ship of fools

1494

 

Image result for ship of foolsRelated image

 

1494?

 

 

Image result for ship of fools

1494

 

The picture by Ambrosius Holbein on the cover page of Thomas More's Utopia printed in 1516 has an interesting ship, though I don't believe the bows of ships of the time sloped backwards the way it's shown in the picture.

 

Image result for thomas more utopia cover page

 

Good luck with the build. If I can be of any help, please let me know.

 

But we need photos of your build:D

 

Steven

Link to comment
Share on other sites

"Lisa von Lübeck" is an interesting subject to build a model. In my opinion is it a shame, that they haven't published (I could not find any hints for this) why they come to the current solution for the 1:1 model (called replica). I think that the model had a lot of details where you can come to an other solution (for example the construction of the stern) The stern has a lot of an caravel and not of an early carack. 

 

In my opinion it's a general problem that also book authors don't give precise information about their sources.  

 

I will follow your research and build with great interest

Regards Christian

 

Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36

On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777

Paused: HMS Triton, 1771 - 1/48

"Have no fear of perfection - you'll never reach it." Salvador Dali

Link to comment
Share on other sites

I agree, Christian, and I think the forecastle could perhaps be re-thought. The one on the Lisa seems a bit too "boxy" for the period.

 

As far as the stern goes, I don't know if flat sterns were in use as early as 1500, but the Navicula Penitentie  (printed in Augsburg) shows them by 1511. Both this ship and the Mary Rose of 1510 are basically carracks but with a caravel's stern. And the name Kraweel appears to come from caravel.

 

Steven

Link to comment
Share on other sites

When I started this log, I thougth I could post some more frequently, but as always - the devil is waiting in every corner..

 

I started this build from the plans, as they seemed reliable. As there were also some nice drawings of the keel and bulkheads, provided by an unknown ship modeler, i used them.

 

Here's the result, back seven years ago. After the fog (sawdust) lifted, I got some nice parts to get started:

59398e1975128_1-Spantenausgeschnittenklein.thumb.jpg.e508628bee4abedb27ab5f8fe7882782.jpg

Dry fitted, and finally glued into place (anno 2010):

59398e4fa7c99_2-Spantengesetzttrockenklein.jpg.4d48615ab277de6eebef0921ca642056.jpg

The upper parts at the stern are not glued, waiting for proper alignment.

 

 

 

 

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

@AnobiumPunctatum

 

You are right. It's a shame to hide your knowledge. But I talked to some of the members of the captains society, and they got the information, that part of this work should be part of a PhD-thesis. I asked some former collegues that stayed at the university if they can get a copy, but it seems, nothing has been published yet. I think it never will. But these members also told me, that the scientists reconstructed parts of the ship, from remains of ships. You will indeed, as stated on the website I mentioned before, find remains of these ships, as parts of interior fitting. An good example are the planks used as tables in the Restaurant "Schiffergesellschaft" (Breite Str.2, Lübeck). I don't know if there are right in the end, but from the scientific point of view it's a good approach.

 

As you are not that far from the baltic sea, I would recommend a visit to Lübeck, if you haven't done yet. Espescially the museums and also the churches have a lot of pictures and votive ships. The baltic sea is nice also, and more reliable than the north sea (water stays 24 hours ^_^)

 

@Louie da fly

When reading all your historic links and advices, I fear i will not come even near to the standard you are expecting.

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

Goetzi,

 

I wouldn't want to impose standards or expectations on you. Ship modelling is fun, not some kind of competition. I added the links and pictures in the hope that you might find them useful, and because I love the ships of this period. I don't think enough people make models from this time (except of course the Santa Maria!) and I love to see someone embark on building one. And I've already learnt quite a bit from yours.

 

Your work so far looks very good - crisp and precise. I look forward to following your build.

Link to comment
Share on other sites

So next was adding balsa filler blocks at the bow, fairing the bulkheads and starting the first planking.

Unfortunately there was a malfunction of the HDD and I was not able to recover all of the data.

I think the pictures of the first planking are lost.

In the course of the planking process, I discovered there were some errors in the drawings (the ones from the modeler, not the plans), that made the planking

very frustrating. Up to that point, I had the feeling, scratch building is very much the same, as building a nice kit. -> o.k. lesson learned

So I did not work very often on the hull, and it took about 6 and a half years to finish the first planking.

 

I made the sides of the upper aft hull from 0,8 mm plywood. I choose this material for two reasons. The upper and lower hull sides begin to diverge in this area. This results in a vertical bend and an slight upright twist.

593d357d8afac_3-lowerSectionforecastleklein.jpg.caaf1cf06dd0a91e1fb5cc5003343395.jpg

My son instisted to put the LEGO knight there.

 

Upper aft deck and lower forecastle deck in place:

 

593d35f894532_4-DeckHeckundMastklein.jpg.a290c7b052f0c7be68d04751bd600843.jpg

 

More pics later.

 

Götz

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

Link to comment
Share on other sites

7 hours ago, WBlakeny said:

Nice planking job and progress overall.

My sons would love your crew!

 

:D:D:D

My son suggested to build quite a bigger ship, so his dragon could also join the party

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

I recoverd some pictures. Some time ago I made an approach to build the crow's nest.

 

I started to make some forms from ply:

59402bc4a7571_7.1-BauteileMastkorbklein.jpg.b762f8faa929205a3867924e066878d0.jpg

 

planked:

59402be2499f9_7.2-BauteileMastkorbklein.jpg.b08738b481bf196bd87d2b1aa2bc07b3.jpg

 

four side pieces glued in place. It took several approaches for a perfect geometric alignment:

59402c436b64b_7.3-vierStrebenamKorbklein.jpg.ca2c6f9c8920ea2bea35044297707595.jpg

planking finished:

59402c603d275_8-MastkorbEntwurfklein.jpg.e6d899c7394b1f38c80cfb7181b37512.jpg

 

Maybe this could be a method for construction these items.

 

Nevertheless the crow's nest is to large. It simple did not look right compared to the size of the model.

But some questions arose:

- Is there a closed planking of the side walls? I'am not sure if I look at all the paintings of periode ships.

- How to enter the crow's nest? If you climb up the ratlines, you must be a monkey with six arms or denier of gravity to enter the crow's nest.

Hopefully I find answers in one of Louie da fly's links. My plans are not any helpful in this aspect.

 

so long,

 

Götz

 

 

 

 

 

 

 

 

 

 

 

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

Goetz, most of the vessels of this period have a rope ladder on the aft side of the "crows nest". The ladder entered beneath the crows nest. Remember that the halliards to hoist the mainyard also enter below the crows nest go over pulley(s) then exit down the front to attach to the yard. There were many designs for these structures. No set patterns. Ratlines did exist in some ships but at this period I doubt they were used to access the the crows nest even if they were fitted. I am in the process of building the same structure for my carrack 
https://modelshipworld.com/index.php?/topic/4915-venetian-carrack-or-nave-rotonda-164-by-woodrat/&

I will post the details soon.

Cheers

Dick (Woodrat)

Current build: 

 Le Gros Ventre 1:48 POF   http://modelshipworld.com/index.php?/topic/564-le-gros-ventre-by-woodrat-scale-1-48-pof-1767-french-exploration-vessel/

 

Past builds:

Mycenaean War Galley by Woodrat - 1:48 - Shell first Plank on Frame:https://modelshipworld.com/topic/33384-mycenaean-war-galley-by-woodrat-148-shell-first-plank-on-frame

Venetian round ship 14th century by Woodrat fully framed - 1:40 scalCompleted

https://modelshipworld.com/index.php?/topic/17991-venetian-round-ship-14th-century-by-woodrat-fully-framed-140-scale

Venetian Carrack or Cocha 1/64 by woodrat   https://modelshipworld.com/index.php?/topic/4915-venetian-carrack-or-cocha-164-by-woodrat        completed

United States Frigate Essex 1:64 POF   http://modelshipworld.com/index.php?/topic/4496-usf-essex-by-woodrat-scale-1-64-fully-framed-from-takakjian-plans/ - completed 

Yenikapi12 by Woodrat - 1/16 scale - a small Byzantine merchant vessel of the 9th century

https://modelshipworld.com/topic/23815-yenikapi12-by-woodrat-116-scale-a-small-byzantine-merchant-vessel-of-the-9th-century-finished/

The Incredible Hulc by Woodrat - an experimental reconstruction of a mediaeval transport

https://modelshipworld.com/topic/25641-the-elusive-hulc-by-woodrat-finished-a-speculative-reconstruction-of-a-mediaeval-merchantman-132-plank-on-frame/

 

 

 

Location: Perth, Western Australia

 

Link to comment
Share on other sites

Dick, thanks for your answer. My plans show ratlines, but I'am not sure yet. On drawings of ships from the baltic sea, I've seen both. Also I found the ladder you mentioned.

I will follow your built. As it will take quite a few month until I come to masting and rigging, I can learn from your quite tremendous and professional build.

 

Götz

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

OK Götz. Have fun with your build. This is a classic picture of a carrack ( Kraeck?) from the northern european region which is a good resource . Cheers. Dick

Is kraweel a corruption of caravel?

5941c43f92d30_kraekbyWA.thumb.jpg.36f5f7f614788762df78887b25f7c92a.jpg

Current build: 

 Le Gros Ventre 1:48 POF   http://modelshipworld.com/index.php?/topic/564-le-gros-ventre-by-woodrat-scale-1-48-pof-1767-french-exploration-vessel/

 

Past builds:

Mycenaean War Galley by Woodrat - 1:48 - Shell first Plank on Frame:https://modelshipworld.com/topic/33384-mycenaean-war-galley-by-woodrat-148-shell-first-plank-on-frame

Venetian round ship 14th century by Woodrat fully framed - 1:40 scalCompleted

https://modelshipworld.com/index.php?/topic/17991-venetian-round-ship-14th-century-by-woodrat-fully-framed-140-scale

Venetian Carrack or Cocha 1/64 by woodrat   https://modelshipworld.com/index.php?/topic/4915-venetian-carrack-or-cocha-164-by-woodrat        completed

United States Frigate Essex 1:64 POF   http://modelshipworld.com/index.php?/topic/4496-usf-essex-by-woodrat-scale-1-64-fully-framed-from-takakjian-plans/ - completed 

Yenikapi12 by Woodrat - 1/16 scale - a small Byzantine merchant vessel of the 9th century

https://modelshipworld.com/topic/23815-yenikapi12-by-woodrat-116-scale-a-small-byzantine-merchant-vessel-of-the-9th-century-finished/

The Incredible Hulc by Woodrat - an experimental reconstruction of a mediaeval transport

https://modelshipworld.com/topic/25641-the-elusive-hulc-by-woodrat-finished-a-speculative-reconstruction-of-a-mediaeval-merchantman-132-plank-on-frame/

 

 

 

Location: Perth, Western Australia

 

Link to comment
Share on other sites

Hi Götz,

Woodrat got here before me, but I was going to recommend you look at his build anyway. But I didn't know he was going to work on the top next!

 

I haven't seen your top against your ship to compare sizes, but tops were very big at this time.

 

I think ratlines would be appropriate for a Hanseatic ship - most northern vessels from this period seem to have had them.

 

 

 

Steven 

Link to comment
Share on other sites

On with the show.

 

I couldn't resist to plank parts of the inner bulwarks. I wanted to see how the swiss pear planks look like.

So here's the result. The wood looks preety good to me.

 

594d47ada243c_6-BeklankungInnenteilfertigklein.jpg.911a60b42cf4fb6afd09df98999beca1.jpg

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

On to the next step.

 

I had do decide, wether to do the forecastel construction or start with the second planking.

forecastle - pro: I get the final shape

                 cons: It can break very easily when the hull is turned upside down for the second planking

 

I don't need to be a clairvoyant, to foresee what will happen, so second planking ist the match winner.

 

Starting with the lower part of the stern:

594ed0fd69238_10-Heckspiegel07_06.17klein.jpg.82d3e2d803b9784515318f9283d5e76f.jpg

 

Hull lined up and start of the second planking

594ed1239d499_11-Zweitbeplnakungstart11_06.17klein.jpg.e7c116350b67554db7d00e312cc24498.jpg

It will take some time. There's a lot of other things that will slow down (Family, work, fire brigade, etc.).

 

 

 

 

 

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

  • 3 weeks later...

a short update - the project was close to the final end.

My wife was looking for some tools on my workbench and managed to kick of the ship from the table  :o

In the end, there were several holes in the planking.

So I ended up cutting away some areas of the first planking. I glued some supporting strips to the bulkheads and started planking, filling and sanding.

 

One of the smaller repairs:

5965196b2b09d_12-NeustartRepaklein.jpg.1427b683ba3949230a7e03829d66db2b.jpg

 

There was a nasty crack in the stern end of the castle. I used Milliput in the end, to get it fixed. Remove of the planking at the stern was no option.

On the other hand, I had to use wood stain (walnut) on the planking. That means I have to change the wood for the second planking also.

So heres planking 2.0.

 

59651a8f85db0_12-Neustart-2klein.jpg.a80a12ec389312f7f17fc83deb845a09.jpg

Next update won't be soon. It's time for holidays.

 

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

  • 4 weeks later...

 

I'am still alive.

My job keeps me very busy, not much time to work on the ship.

This is were I'am up to now.

 

5989e3c5bcf50_13-Zweitbeplankungpend.klein.jpg.bb0e1ea33d59a0b98218eded357d52be.jpg

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

Interesting Log Götz,

and a nice built hull of the "Lisa von Lübeck"

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

1 hour ago, Mirabell61 said:

Interesting Log Götz,

and a nice built hull of the "Lisa von Lübeck"

 

Nils

Thanks Nils,

I'll do my best.

 

Götz

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

Link to comment
Share on other sites

  • 4 weeks later...

Time for an update. I've finished the planking on the lower port side. After sanding the surface smooth, i put som liquid wax on it. Looks quite good.

 

59aa8d9c8ac2a_20170902_001Backbordfertigklein.jpg.376956f48e1a40ab369414c04484f74b.jpg59aa8d9e1aae7_20170902_002Backbordfertigklein.jpg.f8764fda318835fb437e769d3fbcddfd.jpg59aa8d9f5622f_20170902_003Backbordfertigklein.jpg.a1f48a9d8102477d272a217963b4e819.jpg

It's not that glossy in real life. Maybe it's time for a new camera.

 

Next will be planking the false keel.

And then ... nothing spectacular - still the starbord side is to be done. Stay tuned, it still will take some time until I can start working on the forecastle.

 

Götz

 

 

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

  • 4 weeks later...

Work keeps me quite busy, don't have much time left for my hobbies.

So I don't know if anyone is still following this build log.

Nevertheless, I managed to plank the port side of the false keel.59ce816fe78b3_15-20170927_004falscherKielbepl(BB)klein.jpg.9fedf1325718702e60d3a04f04e992a1.jpg

That's it for today. I'll go and have glass (or two) of good beer. Cheers to all.

 

Götz

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

  • 1 month later...

I'am back at the shipyard. I was not able to do any work the last weeks, due to a "little" shoulder surgery.

But now I started planking the starboard side.

A little picture, just for the proof, I'am not telling any tales...;)

5a00c7cfe7e35_16-20171106_003Zweitbeplankungklein.jpg.d3db15a8091470f3d70aba69112efa74.jpg

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

Link to comment
Share on other sites

  • 4 months later...

Hello there in outer space,

 

my job keeps me quite busy the last months. But now I wil have more time for my hobbies. This is just a note I'am not raising the white flag on this model.

As a good dad, I finished a fractionating column for my sons model railway first. It's 1/160 scale, made from scrap plastic and cardboard.

5aa6c65f31543_18-20180312_190713Sideprojectklein.thumb.jpg.31708e40dd4426f10993f4da78e75f29.jpg

 

 

 

Current build: Hanseatic ship 1:50   https://modelshipworld.com/index.php?/topic/16089-hanseatic-ship-c-1500-by-goetzi73-150-first-scratch-build/

 

Completed builds: Nina (Amati), HM Cutter Sherbourne (Caldercraft). Golden Hind (Mamoli)

 

Next on List: Fifie 1:32 (Amati Victory Models)

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...