Jump to content
Robin Lous

Duyfken by Robin Lous - Kolderstok - Scale 1:50

Recommended Posts

My second wooden ship model build...

De Duyfken VOC verkenningsjacht (scouting yacht) 1595-1608, a pinas. From Kolderstok  scale 1:50.

Lenght about 65cm, height 55 cm, width 25 cm. 

Armament: 10 cannons and 4 swivel guns.


Link to the Duyfken replica foundation


Being Dutch, I'm proud of our maritime history and achievements.

I'm well aware and of course not proud of the many horrible things our exploring forefathers did to gain power and wealth.

Nonetheless, their exploring achievements were remarkable and it's almost unbelievable such a tiny country managed to become a powerhouse.


I'm excited to start this build, still so much to learn and I think this is a good choise for my second build.

I got the kit last year as a Christmas gift from the Admiral. :)


Since I believe this is the first Kolderstok Duyfken on this forum, let's have a look at what you get....


From Kolderstok...the kit, the extra gun set (4 guns) and a resin name plate.

I was happy to find the (out of print, Dutch translation) National Geographic book about the building of the replica ship. Superb photo's...very helpful.

There's no ship's boat included, but since you can't discover the world without one...I bought a suitable resin one.


And inside the box...


Wow!...a lot! :o


Very nice step by step manual with good colour photo's. In Dutch, there's an English version included also.





Good quality planks and dowels, the laser cut parts look really sharp. The larger parts are pre-cut to make life easier.


Bits and bobs box...


Looks good...resin and thin laser cut ship decorations, white metal anchor and 4 small swivel guns, brass cannons, neat looking blocks, brass nails, several types of rope and cloth for the flags.

The printed flags (good colours!) can be ironed on this cloth.

Also included is fabric for the sails. Fine quality, cream colour. 2 large plans, a part list and a seperate manual on how to build the grating.


Well...I guess that's all nice and fine. Now let's see what I can do with it. :blush:


I can start when I cleared my workspace, so...the usual: More soon!


Robin :)


Edited by Robin Lous

Share this post

Link to post
Share on other sites

Welcome aboard all followers....the pressure is on already! :D


I started with studying the manual, checking all the parts and making a photo library.

And a bad habit of mine...spending too much money. :(


The rope provided is good, but the standing rigging rope is a bit fuzzy and I'm not too fond of the white/cream coloured running rigging rope....I like it a bit more "moody". I drooled over the Syren Ship Model Company ropes before, so I couldn't resist and ordered a complete set of rigging rope. And while there...added a set of round end gunport hinges. Also...I stumbled upon exactly the same swivel gun set provided in the kit, but made of bronze, so...well...that also. I'm terrible...I know.:blush:


I have to work the weekend, so I can start on monday.


Robin :)

Share this post

Link to post
Share on other sites

Thanks guys.. and bearegalleon, I see it as a blessing you're building this beauty also!

I can learn from you and I hope you don't mind when I ask you some questions now and then.

I'll stick to the kit/replica plan...with some minor modifications. Without major surgery this build is already pushing me to the limits of my skills.


(boring content warning)

After more checking of the manual, plans and parts...a small list of minor modifications I need to do early on.

-#59 For ease of construction I'll move this forward to #2. Slightly modified stern gun ports.

-#6 and #7, I'll make the doors and frames from walnut, blackened brass hinges. So I only use the lasercut parts as a template.

-Since it's single planking I guess it's a good idea "to balsa" the whole hull...not just bow and stern filler blocks.


I already noticed some other stuff I like to modify, but since it will take a while before I get there, I'll list them later.



-Not seen in the manual are the 2 open windows on each side of the rear castle. They are depicted on the plans and lasercut parts for them are included. Edit: found it in the manual.


Shopping list:

-Balsa wood.

-Walnut to replace the lasercut plywood parts mentioned.


More (less boring stuff) soon,



Edited by Robin Lous

Share this post

Link to post
Share on other sites

Hey Robin! I was wondering if you were gonna have any time between builds but I guess not! I never do either. :D I've got my chair pulled up and am ready to watch and enjoy. Good luck!

Share this post

Link to post
Share on other sites

Thanks gentlemen,


Some progress on the shipyard...



I placed the frames and started with the deck.

The frames fit the slots very well, only very little adjustment was needed to get them at the right angle.

Same with the decks (2 halves)...a snug and precise fit. I used a crazy amount of clamps and rubber bands because of the slope.

I'll do the rear part of the deck tomorrow...no hurry!


6 hours ago, bearegalleon said:

 Definitely balsa up the hull, especially at the stern, strongly advocate that.


Yep, yep. :)


Further news:


Yesterday I contacted Hans from Kolderstok, because of some air bubbles on the surface of some of the resin parts.

And today...

A new set together with a new version of plan 1. There seems to be a minor scale issue on the older version I had.

Now...that's what I call...Service!



Received an email from Syren (Chuck), letting me know my order is on it's way.

Oh...and also an email from the manufacturer of the bronze swivel guns...they can't deliver the guns. No drama, the white metal ones are fine and I'll blacken them anyway.


When I finish the rear part of the deck I'll do the stern, so more soon.


Robin :)


Share this post

Link to post
Share on other sites

that's progress!  ;)    I see your not using a build slip.  until I got one,  I use a pine board and jury rigged a way to set up the frame.   I use the deck platforms to set the bulkheads.  as said earlier........your off to a great start  ;) 

Share this post

Link to post
Share on other sites

Thanks popeye! ...and the likes...and the already 17 followers (wow!).


The build slip thing gives me a bit of a headache. Had that with the bireme also.

I think a keel clamp is of very limited use, so not worth the money.

For the bireme I mainly used a small kitchen towel as a comfy soft cradle...that won't work for this one. Well, maybe a beach towel, but not that practical.

So, I'm thinking of building a drydock from styrene foam for the Duyken.


Little, but steady progress...



Finished the base deck.

It's made of 4 pieces....2 halves front and 2 halves aft. All smooth after some minor sanding.


Next will be the balsa wood in between the frames.

I'll wait a bit with the deck planking, because I do it slightly different and I'm waiting for new gratings.

The grating in the kit is perfectly fine, but I'll do the ones on the top decks also (instead of covered with fabric).

To get them all the same, I ordered 4 sets (2 needed aft castle).


Also waiting for more walnut sheet and strips. I don't want to stain...or keep it as minimal as possible.

Plywood will be covered or replaced with walnut where I can.


Balsa next...lots of saw and sanding dust I spose. :huh:


More soon,


Robin :)

Share this post

Link to post
Share on other sites

I go to the porch or the garage as well........the admiral is tired of cleaning my desk {I do it,  but I tolerate it longer than she can stand} {'cuz she can't stands n'more! AK-K-k-k-k-k!} emoticones_dibujos_popeye-el-marino1_en.PlanetaEmoticon_com.gif.5db50a83f31a4fa7eea94b668b72b331.gif


the foam sounds like a viable option.....it can be shaped very easily  ;)   looks nice.

Share this post

Link to post
Share on other sites

Indeed...it makes a mess.

When I was in the middle of using my saw table and disk sander to shape the blocks for my first filling....the Admiral came home.

To my amazement, she didn't complain. :o


First done...


It's made of 3 pieces....15mm thick. Shaped the blocks with both proxxon tools and sanded smooth after fitting. Pre fairing of course.

One down...25 to go. The Admiral will likely change her mind when the dust starts to settle down.:(


Also did the basic construction of the stern...not fixed to the ship yet.


Needed some dry fitting to figure out where to drill the hole for the rudder control rod. (it probably has a nice fancy name unknown to me).

I look forward to plank the stern with walnut.


More soon,


Robin :)



Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
  • Create New...