Jump to content
Thanasis

Tserniki vessel from Mytilene island by Thanasis - FINISHED - not much of a scratch build log

Recommended Posts

Hello all. You might have noticed my absence but I’m still here…

Well, it’s been a long time since a previous presentation work of mine but I’m not notorious for accurate build logs anyway. So I have come to prove myself again …:)

 

I started the model one year before accepting the challenge to build a model with open hull.

I didn't work on it regularly, so that's why the lack of many photos, not that I have in my mind to take photos in other case…

I chose to represent a vessel from my place of origin, the Island of Mytilene (Lesbos).

It was a small double ended vessel (Tserniki type) which was used for coastal trading.

It was usually rigged with a half lateen sail or a sacoleva sail (sprit sail).

19849.JPG...19850.jpg...19851.JPG
 

I observed many photos of that vessel from the archives of 3w.naftotopos.gr and I modified an old plan of that hull type.

                                                       19852.jpg
 

I built the model following the method plank on bulkheads removing a number of them afterwards from the middle of the hull.

I prepared the false frames by soaking proper pieced of wood, bending them and drying them on the surface of the removed bulkheads.

19853.JPG...19854.jpg...19855.JPG
 

I had to paint the inner of the hull before I plank the deck and keep it covered for the rest of the construction.

19856.JPG...19857.JPG...19858.JPG
 

The grapnel anchor was made by using fishing hooks that were set and glued inside a hole in a plastic rod, while the cleats on the mast were made by modifying some fishing swivels…19859.jpg

 

The Shackles were made as is shown there

The Belaying pins were made as is shown there

The Sails were made as is shown there

The cargo was made by chopping some twig pencils.19860.jpg

 

It took me much time to decide about the colors on the model…Painting is always the only stage of my builds that stresses me. Wanting to give a local-origin character in my models, I'm always anxious whether I have chosen the right colors or I have turned it to a clown.

19861.jpg...19862.JPG...19863.JPG

 

Finally the stand was made by a piece of plywood and some wooden rings which were cut in half. 19864.jpg
I hope my wife won’t notice the missing curtain hoops...:P :)

 

See the finished model in gallery.

             a-8.jpg

Many thanks

Share this post


Link to post
Share on other sites

Thank you Nikiforos-Thank you Igor. You're both vary kind.
Vagelis, You amazed me…Eventually you found the way to join us here.
By the Italian way…😉 Thank you buddy.

 

Grazie Nikiforos-Grazie Igor. Siete entrambi molto gentile.
Vagelis, mi hai stupito ... Infine trovato il modo di unirti a noi qui . 
Con via Italiana ...😉 Grazie  Compagno.

 

Thx

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...