Jump to content
RGL

HMAS Vendetta 1925 by cog, popeye the sailor, and RGL - Showcase Models -1/350 - Plastic

Recommended Posts

Cog and I discussed doing a group build, then I read the instructions and you need 8 people, so unless anyone else wishes to join, we are going to do a Northern Hemisphere and Southern Hemisphere build of the HMAS Vendetta by Showcase models. 

 

A quick google search will reveal the ships history as a V&W Class destroyer of WW1 vintage. She lasted from 1917 to 1945, but we intend to build it strait from the box.

 

 

IMG_6480.JPG

IMG_6489.JPG

IMG_6624.JPG

IMG_6638.JPG

index.jpg

Share this post


Link to post
Share on other sites

Via the Australian National Archives there is a set of plans for the Vendetta as purchased.

 

Now if you wish to join us feel free, the kit is about $50 Australian available via BNA in Oz, Ebay or Starling Models in the UK. I purchased a set of PE from White Ensign Models for g class destroyers which has little bits such as funnel grilles.

IMG_6492.JPG

IMG_6493.JPG

Share this post


Link to post
Share on other sites

Always welcome OC.

 

Popeye, there is some PE in the kit. I am not far off by saying that Greg will probably have a large stash of PE remaining from previous builds, I do have some, almost an extra Musashi set, and a bit extra for certain items like stanchions. You could consider getting a few rods to replace a.o. those lovely out of scale plastic masts.

 

Greg will be weathering his, I'm not entirely certain if I will. Maybe I'll build it on the slip/in the dock.

Share this post


Link to post
Share on other sites

Hello Mark,

A bit less noise whilst crunching, I'm trying to concentrate ;) Dunno, on what, but it did sound rather nice when I first wrote it :D :D :D Welcome to the multiple-build

 

Nearly forgot, Dennis. If you use acrylics, prime first. As many before me, I switched to Tamiya rattle cans, they do have a small bottle of their ptimer too, for acrylics do not adhere to well on plastic and brass ... once primed, it doesn't matter to much what you spray, or smear on the parts ;) ... if I think about something else, I'll just post it.

 

Cheers

Share this post


Link to post
Share on other sites

John,

I don't know about specific RAN models, but you can make quite a few based on their British counter parts, which are available.

Here is a discussion on it. Greg will probably know more on the subject

Share this post


Link to post
Share on other sites
10 minutes ago, cog said:

John,

I don't know about specific RAN models, but you can make quite a few based on their British counter parts, which are available.

Here is a discussion on it. Greg will probably know more on the subject

at the uk site, starling models, they have an Australian Collins class submarine and a small scale, 1/700 patrol boat.

 

cheers

 

chris

 

Share this post


Link to post
Share on other sites

good morning gents......woke up early this morn with a headache on the left side.   reliever is working fine.....no worries.   I took the day off today.......should be heading to work at this moment  :)   it took a little convincing to get the admiral's go ahead.  I had to show her the Jeanne D'Arc...........and then there was the Plastic issue {she hates plastic}.   looked it up on E-Bay and found two.   both were 'buy it now'.

 

good to know there is PE in the kit......explains why the kit cost that much.   1:350 can't be that expensive.   I plan to use enamels....I have plenty of Model Master to go around.   this will give me a chance hopefully to learn some of your tricks Greg.....gotta break out of this 'Mr Clean' cycle one of these days.   pretty ambitious Carl........should look very nice.   I'll see what stand comes with the kit and go from there.   thanks for the heads up about the masts  ;)   no doubt Greg has something up his sleeve.

 

thanks for the invitation.......should be rather fun  :) 

Share this post


Link to post
Share on other sites

You’re welcome Popeye, anyone else is welcome to join us. This is a very simple kit, I’ll value add as I have a little bit left over from other builds. It’s cheap you’ll enjoy cog’s wit. 

 

Greg 

Edited by RGL

Share this post


Link to post
Share on other sites

It’s a matter of improv really. It appears to be Gunze light grey (it looks white in the old b&w photos) so I’m thinking a dull white overspray with some rust lines on the panels, oilcanning below the waterline, add some barnacles............

 

The kit is so small you can use the kit and no aftermarket at all. The rest is just OCD 

Edited by RGL

Share this post


Link to post
Share on other sites

Just to show you, I've got the same kit ...

 

5afabf8871551_IMG_3363copy.thumb.jpg.1ab0271bb938c761c64172a7961d9a12.jpg5afabf8f4096d_IMG_3365copy.thumb.jpg.5e5d659f296564f1b44cced8d2045638.jpg

 

 

There is a paint scheme in the box included, Popeye. You'll need to convert to the enamel brand you're using

paint_scheme.thumb.jpg.4d5440b2b8693edabe253455e636ba10.jpg

 

 

Hope you can find some if not all in your stash ;)

Share this post


Link to post
Share on other sites

nice!   if that diagram comes with the kit,  I'll be all set  :)   I like both variants........I hope the model fits as well as it looks ;)   back in the day,  I used to readily get Pactra and Humbrol.   these two are now hard to find in the shops.   I have a few conversion charts bookmarked.   I think I'm going to regret the PE tool I used to have........traded it for an unfinished Billing Bluenose kit.  I think I can make do with what I have handy though.

 

thanks for showing me the kit........now I can't wait for it to get here :D 

Share this post


Link to post
Share on other sites

Not much bending to do what I've seen for PE. Stair handrails, which you can do with flat pliers. I think a PE tool would be an overkill for the bending you'll do on this one. I would advise you to buy one for e.q. a 1:350 Hood, or Yamato, but for this one ... nah, no realy

 

I've decided on the pre WWI, mebby I buy another one and do the WWI also. Although, I've got that monster on the table too

Share this post


Link to post
Share on other sites

First steps: Taking parts from their frets, cleaning them up, and dry fitting

 

5afb64298a0b6_IMG_3369copy.thumb.jpg.0b9af07a91d9f603b48667df0eb76a6c.jpg5afb6430b42f4_IMG_3368copy.thumb.jpg.1c8cea7dee384380df57aa6cc06c121d.jpg

 

ALthough it's a 1:350 model, it is small, especially compared to the Tamiya kit I've been working on. The details are pritty good, fitting of pieces is beyond what I expected. The minor thing about it in my eyes are the number of points with which parts are attached to the fret, a lot of cleaning to do

Edited by cog

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...