LyleK1 Posted July 21, 2020 Share #31 Posted July 21, 2020 Just started on the Bounty with my slip... Trying to find the best way to set up for the laying of the bulkheads (shown dry fitting). I haven't gotten the level and square out... but I will just to confirm that it is true, level and square. Sure looks like it. You'll notice the strips under the keel... my bulkheads run right to the bottom of the false keel... I think it will hold fine with the clamps... we'll see. So far, I like it but need to learn how to use it! mtaylor, Canute, Ryland Craze and 4 others 7 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
the learner Posted November 24, 2020 Share #32 Posted November 24, 2020 Looks like it will be a nice model how is your progress on the build? Scottish Guy, Keith Black, Canute and 1 other 4 Quote Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line Link to comment Share on other sites More sharing options...
DaveBaxt Posted January 12, 2021 Share #33 Posted January 12, 2021 Seriously considering one of these . Now that some of you guys have been using this for a while,what do you think of them and are they worth the money. Scottish Guy, Canute, mtaylor and 1 other 4 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
tlevine Posted January 16, 2021 Share #34 Posted January 16, 2021 Why not make your own? In my opinion, the markings on the vertical support and base are too broad and too far apart to give more than "eyeball" accuracy anyway. Scottish Guy, Canute, tkay11 and 2 others 5 Quote Toni Chairman Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Current Builds: NRG Rigging Project Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section Gallery: Hannah - 1:36 scale. Link to comment Share on other sites More sharing options...
stuglo Posted January 16, 2021 Share #35 Posted January 16, 2021 I have found it very useful, but recommend some modification and additions. The parallel keel holder obscures a breadthplan that often needs fixing to board, and makes use of alignment tools difficult. I made 3 rectangular blanks from the excess mdf. The markings are broad, but these are easily supplemented. There could be vertical lines -especially midlines- on the upright squaring board but a plan or grid is easily attached. The squaring board cannot approach stem or stern if their holders are in place. I made an additional board with feet outside the main horizontal board itself. Overall it is very useful and flexible , and removes need to construct a new building board with each model. The price is fair and quality of finish good mtaylor, Keith Black, Scottish Guy and 2 others 5 Quote current build- Swan ,scratch on shelf,Rattlesnake, Alert semi scratch,Le Coureur,, Fubbs scratch completed: nostrum mare,victory(Corel), san felipe, sovereign of the seas, sicilian cargo boat ,royal yacht caroline, armed pinnace, charles morgan whaler, galilee boat, wappen von hamburg, la reale (Dusek), amerigo vespucci, oneida (semi scratch) diane, great harry-elizabethan galleon (semi scratch), agammemnon, hanna (scratch).19th cent. shipyard diorama (Constructo), picket boat, victory bow section Link to comment Share on other sites More sharing options...
ah100m Posted January 17, 2021 Share #36 Posted January 17, 2021 Do you have photos or drawings please? Keith Black, Canute and Scottish Guy 3 Quote Link to comment Share on other sites More sharing options...
stuglo Posted January 17, 2021 Share #37 Posted January 17, 2021 changes or extras 16 hours ago, ah100m said: Do you have photos or drawings please? changes and extras :- Scottish Guy, Keith Black, mtaylor and 4 others 7 Quote current build- Swan ,scratch on shelf,Rattlesnake, Alert semi scratch,Le Coureur,, Fubbs scratch completed: nostrum mare,victory(Corel), san felipe, sovereign of the seas, sicilian cargo boat ,royal yacht caroline, armed pinnace, charles morgan whaler, galilee boat, wappen von hamburg, la reale (Dusek), amerigo vespucci, oneida (semi scratch) diane, great harry-elizabethan galleon (semi scratch), agammemnon, hanna (scratch).19th cent. shipyard diorama (Constructo), picket boat, victory bow section Link to comment Share on other sites More sharing options...
LyleK1 Posted January 29, 2021 Share #38 Posted January 29, 2021 On 11/24/2020 at 12:20 PM, the learner said: Looks like it will be a nice model how is your progress on the build? I'd post pictures but am at work... check out my build log! HMS Bounty by Lyle K1 mtaylor, Keith Black, Canute and 1 other 4 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
LyleK1 Posted January 29, 2021 Share #39 Posted January 29, 2021 On 1/12/2021 at 2:38 AM, DaveBaxt said: Seriously considering one of these . Now that some of you guys have been using this for a while,what do you think of them and are they worth the money. Worth every penny! mtaylor, Canute, Keith Black and 1 other 4 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
DaveBaxt Posted January 30, 2021 Share #40 Posted January 30, 2021 10 hours ago, LyleK1 said: Worth every penny! The problem I am having is sourcing this! I understand that Hobby zone are no longer making these. That is what I was informed by model boat shops here in the uk. mtaylor, Scottish Guy, Canute and 2 others 3 1 1 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
James H Posted January 30, 2021 Author Share #41 Posted January 30, 2021 1 hour ago, DaveBaxt said: The problem I am having is sourcing this! I understand that Hobby zone are no longer making these. That is what I was informed by model boat shops here in the uk. @DaveBaxt it's still shown on their website: https://www.hobbyzone.pl/en/3-boat-building-tools/ but temporarily unavailable. Might be worth emailing them direct. mtaylor, Canute, Scottish Guy and 1 other 4 Quote SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48 Link to comment Share on other sites More sharing options...
DaveBaxt Posted January 30, 2021 Share #42 Posted January 30, 2021 1 hour ago, James H said: @DaveBaxt it's still shown on their website: https://www.hobbyzone.pl/en/3-boat-building-tools/ but temporarily unavailable. Might be worth emailing them direct. Thanks for the link.I will give them a try.Best regards Dave Scottish Guy, Keith Black, James H and 1 other 4 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
myxyzptlyk2003 Posted January 30, 2021 Share #43 Posted January 30, 2021 Here in the US, I had ordered one of these from hobbyzoneUS last spring. It was on backorder then. Just got in mid December so it took over 6 months to get one. Well worth the wait. Keith Black, Scottish Guy, Canute and 1 other 4 Quote Link to comment Share on other sites More sharing options...
DaveBaxt Posted January 30, 2021 Share #44 Posted January 30, 2021 3 hours ago, myxyzptlyk2003 said: Here in the US, I had ordered one of these from hobbyzoneUS last spring. It was on backorder then. Just got in mid December so it took over 6 months to get one. Well worth the wait.Good to hear they are still doing them. Thanks for you reply. Best regards Dave Canute and Scottish Guy 2 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
Nirvana Posted January 31, 2021 Share #45 Posted January 31, 2021 I have sent an email to HobbyZone in the USA and they don't know when or if the slip will be back on the market. They are not getting replies from Poland themselves. Which is weird. I would like to get one slip myself. Canute, mtaylor, Scottish Guy and 1 other 4 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
DaveBaxt Posted January 31, 2021 Share #46 Posted January 31, 2021 1 hour ago, Nirvana said: I have sent an email to HobbyZone in the USA and they don't know when or if the slip will be back on the market. They are not getting replies from Poland themselves. Which is weird. I would like to get one slip myself. Yeah that dosn,t sound good does it. I assume the Hobbyzone in the USA is supply only or do they just don,t make the slipway we want. Wonder if we could get the plans to make one ourselves? Scottish Guy, mtaylor and Canute 3 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
Nirvana Posted January 31, 2021 Share #47 Posted January 31, 2021 Dave, The strange part of it the smaller version is still available. Go figure.......😀 Canute, Keith Black and Scottish Guy 2 1 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
James H Posted January 31, 2021 Author Share #48 Posted January 31, 2021 HobbyZone USA is the US reseller and they don't make the products themselves. mtaylor, Scottish Guy and Canute 3 Quote SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48 Link to comment Share on other sites More sharing options...
DaveBaxt Posted January 31, 2021 Share #49 Posted January 31, 2021 7 hours ago, Nirvana said: Dave, The strange part of it the smaller version is still available. Go figure.......😀 Now that is odd! Scottish Guy, Canute, mtaylor and 1 other 4 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
LyleK1 Posted January 31, 2021 Share #50 Posted January 31, 2021 Although the entire unit might be a bit difficult to build without proper equipment, the base would be easy enough. Have you thought about building one yourself? I'm sure those of us that have one could supply pictures and measurements. Keith Black, Scottish Guy, mtaylor and 1 other 4 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
Nirvana Posted January 31, 2021 Share #51 Posted January 31, 2021 Lyle, I have a 3d printer, shouldn't be to hard to re-create such for personal use, based on pictures and measurements. Not a bad idea! HobbyZone in Poland are still showing unavailable for this product. Scottish Guy and Keith Black 1 1 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
LyleK1 Posted January 31, 2021 Share #52 Posted January 31, 2021 1 hour ago, Nirvana said: Lyle, I have a 3d printer, shouldn't be to hard to re-create such for personal use, based on pictures and measurements. Not a bad idea! HobbyZone in Poland are still showing unavailable for this product. I'm not familiar with a 3d printer but the smaller pieces should be doable with it. I wouldn't want to infringe on any copyrights... let me know if I can help. Scottish Guy, Canute, Keith Black and 1 other 4 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
Nirvana Posted January 31, 2021 Share #53 Posted January 31, 2021 15 minutes ago, LyleK1 said: I'm not familiar with a 3d printer but the smaller pieces should be doable with it. I wouldn't want to infringe on any copyrights... let me know if I can help. And I do respect that, plus I am totally against copyright infringement. So let's leave it there. Thanks though. Keith Black, mtaylor, Canute and 1 other 4 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
DaveBaxt Posted February 1, 2021 Share #54 Posted February 1, 2021 (edited) Update I have just received an email from Hobby zone. The re was two answers to my question. All orders to the uk are currently suspended due to the Brexit transition period ( As far as I know.this finished on the 31st December). Two they are currently not sending any orders for the professional slipway anywhere but they are working on it.Please check retail shops for updates. This does sound a bit more promising . However this looks like I might have to make one or at least come up with something similar. Perhaps some of you more experienced guys can come up with some ideas as we could be waiting on Hobbyzone for some time,especially here in the UK. Thanks guys for all your suggestions it is much appreciated. Edited February 1, 2021 by DaveBaxt thibaultron, mtaylor, Canute and 2 others 5 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
Nirvana Posted February 1, 2021 Share #55 Posted February 1, 2021 Dave, you might have to come up with something yourself. According to Hobbyzone website in Poland it's still not available. And they will direct ship to the USA. Their website has gotten new products during the past 9 months or more. I see two scenarios: 1- There's a new version coming out, which would be great. 2 - It will be discontinued, which would be sad. Brexit has just made it harder to export and import only to England, it's not affecting other countries to my knowledge. mtaylor, Canute, Scottish Guy and 3 others 6 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
Wahka_est Posted March 26, 2021 Share #56 Posted March 26, 2021 (edited) I want to share my super experience with Hobbyzone Poland. Little more than month ago i wrote to Hobbyzone Poland and asked about professional build slip and when it would be available. They said that they are working on it but if after a month its still not available i should write them again and they will organize it for me. I told them that i will, even offered to gather up people to make bigger order - they kindly refused and said it special for me. So month passed, slip still not available and i sent them email. Same day i got response that “promise is a promise “ and asked my details to organize everything. 4 days later i got my slip with even handwritten note in estonian (yes from Poland) saying “thank you Vahur and Happy modelling”. Edited March 26, 2021 by Wahka_est JeffT, James H, Scottish Guy and 7 others 9 1 Quote Link to comment Share on other sites More sharing options...
DaveBaxt Posted March 27, 2021 Share #57 Posted March 27, 2021 10 hours ago, Wahka_est said: I want to share my super experience with Hobbyzone Poland. Little more than month ago i wrote to Hobbyzone Poland and asked about professional build slip and when it would be available. They said that they are working on it but if after a month its still not available i should write them again and they will organize it for me. I told them that i will, even offered to gather up people to make bigger order - they kindly refused and said it special for me. So month passed, slip still not available and i sent them email. Same day i got response that “promise is a promise “ and asked my details to organize everything. 4 days later i got my slip with even handwritten note in estonian (yes from Poland) saying “thank you Vahur and Happy modelling”. Thats great and well done for sticking with it. So writing to them looks to be the only way forward in the short term. I have only just started the hobby and have bought many items including a serving machine ( which is brilliant by the way) So up to now I have bought more than twice what it anitially cost for my model ship. So I am in two minds whether to go for this as I have a limted budget and could really do with a pedalstal drill too. Hopefullly I will be needing a new model ship soon and that slipway will definately be handy. Best regards Dave Keith Black, Scottish Guy, mtaylor and 2 others 5 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
Mike Hunt Posted July 2, 2021 Share #58 Posted July 2, 2021 On 1/30/2021 at 3:15 PM, DaveBaxt said: The problem I am having is sourcing this! I understand that Hobby zone are no longer making these. That is what I was informed by model boat shops here in the uk. I ordered mine from Minyarts in Germany about four weeks ago (still at Frankfurt airport waiting for a flight down under). As of five minutes ago they have them in stock for 79Euro thingies. mtaylor, DaveBaxt, Canute and 1 other 4 Quote Current builds: Colonial Brig Perseverance, Brigantine Matthew Turner, Gorch Fock, Link to comment Share on other sites More sharing options...
Roandad Posted December 9, 2021 Share #59 Posted December 9, 2021 All this building jig is now available and I ordered one recently which arrived two days ago, I ordered from Hobbies.co.uk but I know at least one Scandinavian dealer has them in stock as well, but they no longer ship to the UK. Certainly, for European readers, now is the time to order before they all go again. By the way, I have been waiting for most of this year to get hold of this tx Scottish Guy, Nirvana, mtaylor and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Ian B Posted December 10, 2021 Share #60 Posted December 10, 2021 I've had one of these for a while..well worth all the fuss of you trying to obtain one..don't give up! My Vangaurd build was so much more manageable in the rig. Especially after doing the hull (which was super straight).being able to swing it 360deg for copper plating. Scottish Guy, hollowneck, Canute and 2 others 5 Quote HMAV Bounty 'Billings' completed ⛵ HMS Cheerful - Syren-Chuck' completed Steam Pinnace 199 'Billings bashed' - completed ⚓ HMS Ledbury F30 --White Ensign -completed 😎 HMS Vanguard 'Victory models'-- completed Bismarck Amati 1/200 --underway 👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.