Jump to content

USS/SS Leviathan 1914 by shipmodel - FINISHED - 1/200 - troop ship/ocean liner


Recommended Posts

Dan,

 

We both enjoyed meeting and having dinner with you too at the recent NRG Conference.

 

The Colegate Model is part of an exhibit at the Lake Superior Maritime Visitors Center here in Duluth.  The Visitors Center is run by the Army Corps of Engineers who are responsible for maintaining harbor improvements around the Great Lakes.  I will try to stop by next week to take some photos but you might also wish to contact them directly.

 

Roger

Link to comment
Share on other sites

First, thanks to everyone for the compliments and likes.

 

Roger - a special thanks to you.  Photos of another model will be very welcome.

  I am still trying to piece together from photographs the exact details of the stern deckhouse and its roof.

 

Dan 

Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser

 

Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS OneidaSwan 42 racing yacht  Queen Anne's Revenge (1710) SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914),  James B Colgate (1892),  POW bone model (circa 1800) restoration

 

Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas

 

"Take big bites.  Moderation is for monks."  Robert A. Heinlein

 

 

Link to comment
Share on other sites

Roger - 

 

Thanks so much.  I will use the model to check against mine and the photographs that I have collected.

 

I will do a brief boat tour log once I have finished.

 

Dan

Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser

 

Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS OneidaSwan 42 racing yacht  Queen Anne's Revenge (1710) SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914),  James B Colgate (1892),  POW bone model (circa 1800) restoration

 

Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas

 

"Take big bites.  Moderation is for monks."  Robert A. Heinlein

 

 

Link to comment
Share on other sites

  • 5 weeks later...

 

Hi all –

 

I hope my countrymen all had a good Thanksgiving and everyone's favorite football team, whether round or oval, won.

Unfortunately, I root for the NY Giants.  Oh well . . .

 

Here is the next segment of the build.  As before, mostly photos with captions.

 

The final major components of the ship were the masts, which also acted as the cranes for the cargo booms.  Here they are in photographs.

1359089380_5overallfore.thumb.jpg.9969dfd1770342258019d08ff164c6ab.jpg

1510208232_6overallaft.thumb.jpg.5d6ddd1ccc6dae9a5e0bf87f2a01ece9.jpg

And how they turned out.

1623242239_7overallfore2.thumb.jpg.36a72f9a3fded77eb11c94f499027123.jpg

1789789686_8overallaftmodel.thumb.jpg.8e94589b30ff8249999325e15f8725e3.jpg

The mast tops anchored the shrouds and stays, and the single and triple blocks of the boom tackle were secured here as well.

621923341_9mastheadfore.jpg.3fe81824b953842defd935de4474ab9f.jpg

I could not fit any available triple blocks for the topping lift tackle so I used doubles.

1510018621_10mastheadfore.jpg.08e81b1fcde18ba779c3d376bd4c725b.jpg

1199752524_11mastheadstern.jpg.df5cbf2ab54166bd95d6458643c4d212.jpg

The lift tackles reeve through double blocks at the deck just inboard of the shroud turnbuckles.

1575271302_12mastshroudsbase.jpg.a30b88e6c28736845707a75be77dc515.jpg

There are four shrouds, with ratlines only between the inner two, though there are swifters every fourth ratline that go across all four.

311671219_13foreshroudbase.jpg.08f255d4d0ff425404407b6df21127ad.jpg

The bases of the booms have clevis joints that fit in a ring around the base of the mast.

1714056509_14mastbasestern1.jpg.1bcff7afd5cfe0b01b121e5f2c6642b5.jpg

There is a multi-headed steam winch for each boom, set in a circle on deck around the mast.

1790243210_15mastbasestern.jpg.9149b30e18413c874b2a966ce4439cf8.jpg

A large searchlight sits on a railed platform on the foremast.

1674633517_16mastbasefore.jpg.cc4e6baf283fe8157d70e270ad6c7d59.jpg

On the troop ship a large lookout station was hung below the searchlight.

696328601_17lowerfore.jpg.0c08c0f0f2df635ab584f12ac0f262c7.jpg

Its peculiar shape had to be pieced together from segments of plastic tube turned inside out.

24230093_18mastforetroopship.jpg.573c4780251125c8c8cc40bb71d26f6d.jpg

 

The final few details to finish the ship will be covered in the next installment.

 

Till then, be well.

 

Dan

 

 

 

 

 

Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser

 

Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS OneidaSwan 42 racing yacht  Queen Anne's Revenge (1710) SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914),  James B Colgate (1892),  POW bone model (circa 1800) restoration

 

Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas

 

"Take big bites.  Moderation is for monks."  Robert A. Heinlein

 

 

Link to comment
Share on other sites

Very nice detail on the masts Dan. The blocks look very precise, were they bought or did you make them?

The ratlines are remarkably cleanly done.

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

This is amazing work, Dan. Your attention to detail, tracking down every tiny item of such a complex vessel and representing it to scale takes my breath away. You can be justly proud of her.

 

Steven

Link to comment
Share on other sites

Thanks, guys, for the compliments and likes.

Sorry I'm not giving a more complete explanation, but the techniques are pretty much the same as explained previously.

I'll go into a bit more detail when I get to making the ocean display base.

Keith - the blocks and winches are from Bluejacket.  Everything else is scratch-built.

 

More soon

 

Dan

Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser

 

Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS OneidaSwan 42 racing yacht  Queen Anne's Revenge (1710) SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914),  James B Colgate (1892),  POW bone model (circa 1800) restoration

 

Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas

 

"Take big bites.  Moderation is for monks."  Robert A. Heinlein

 

 

Link to comment
Share on other sites

Well executed Dan....I just love the fine detail and the line of demarcation between the war and commercial designations.

 

Rob

Current build:

Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196

 

 

Finished build:

Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/#

 

Current build(On hold):

Build log: 1/96  Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/

 

Completed build:  http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/

The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts."

Link to comment
Share on other sites

Beautiful work Dan,

its a wonderful model !

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Just quietly waiting for the finish line.   Spectacular model Dan.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Lovely, some real nice detailed work

Edited by Kevin

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 

 

 

HMHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   U552 German U Boat - Trumpeter - 1/48  Amerigo Vespucci     1/84 - Panart-   HMS Enterprise  -CAF -  1/48     

Finished     

St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished   Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Link to comment
Share on other sites

  • 2 weeks later...

Thanks, everyone, as always.

One of the best things about our community is all the support we give each other.

 

Here are the finishing details for the ship. 

 

First, the 6 inch cannon.

The 3-D printed ones from Shapeways are little gems and match quite closely the photos.

1613720227_1cannon1.jpg.b1c648f1b9a2b4cd6cffe4c277e6d8b3.jpg1611607381_2cannon1a.jpg.85b730243f375aff65e70ce4642742cc.jpg2145592925_3cannon2.jpg.ad53e0a8027ed6632b3dddaac52dfc42.jpg559227878_4cannon3.jpg.d0ffdbbd4e59d446a640248cf2eb631c.jpg

On top of the flying bridge a square platform was built with angled sides.

The history of the ship identifies it as the large rangefinder for the guns.

This is the best photo, taken during the conversion to the troop ship.

1958620744_18rangefinderplatform.thumb.jpg.1277a38b1f178190918713e96138bf37.jpg

I believe that the long thin box on top was a wooden cover for the rangefinder, but I have no definitive proof.

I did manage to locate a schematic for a contemporary rangefinder of the size that would fit the platform and which is just tall enough to rise above the platform sides.

261359169_19rangefinderlarge.jpg.ccf85f9c85633806c98b269b2936e69d.jpg

And here is how it came out on the model. 

I am not sure about the metallic ends, but I reasoned that paint might interfere with its operations, and when not in use the wooden cover would hide them.

I cheated a bit by giving the rangefinder a complete base and pedestal rather than cutting it in half.

As before, the red edges indicate that the structures were cut along the centerline.

 

342784154_20rangefinder1.jpg.e5c252227878ed581ede1a13a9f9e288.jpg

On the liner side the bridge deckhouse sported a wooden nameboard.

It was computer printed on acid free art paper.

432882801_21nameboard1.jpg.c2b325924068a03037394d397b693de3.jpg

553569074_22nameboard.jpg.069601c0c4b9c77742cc4965a67fe6ed.jpg

The model sports several flags.

This is the house flag of the United States Lines from 1929

880339497_23houseflag.jpg.63b904be0d060eafb590a237bb5a1c53.jpg

The signal halyard bears the flags of its radio call sign, LHGD  (thanks for this information go out to Richard Rabbett)

They are mounted on a wire halyard that is bent as if by the wind.

121579864_24signalflags.jpg.b9b664ab5b94baa7aacef2f60448858f.jpg

At the bow is the US ensign with 48 stars. 

Although this would not normally be flown at sea, I am picturing her moving 'slow ahead' and entering New York harbor.

572224229_25ensign.jpg.8cc4883cc9d46fc031060319499df471.jpg

And at the stern the Stars and Stripes.

269108180_26USflag.jpg.147087b2d4c021f1239869a136435a4f.jpg

This completed the model.

Next, making the ocean, and final photos.

 

A Healthy and Happy Holiday to one and all.

 

Dan

Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser

 

Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS OneidaSwan 42 racing yacht  Queen Anne's Revenge (1710) SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914),  James B Colgate (1892),  POW bone model (circa 1800) restoration

 

Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas

 

"Take big bites.  Moderation is for monks."  Robert A. Heinlein

 

 

Link to comment
Share on other sites

Lovely progress Dan. The red does indeed accentuates the cutted edges, so ithose do not look like something partly finished.

 

Looking forward to the "under ground"

 

merry X-mas & all the best for the new year to you and yours

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Link to comment
Share on other sites

  • 3 weeks later...

Hi all – and Happy New Year.

 

Thanks as always for the comments and likes. 

I hope you will enjoy this final installment of the Leviathan build log.

 

With the completion of the model itself, I turned to its display.  Under the contract I was asked to set the waterline model in a seascape for exhibition in the museum.  Here is how I went about it –

 

The model was located on a board of ¾” furniture grade plywood that allowed about 4 to 6 inches all around.  To help show a bit of movement, there was just a bit more space allowed at the stern than at the bow.  The model was secured in place with several screws from underneath.

 

Before being screwed down a long strip of kitchen plastic wrap was laid between the model and the board.  The excess all around was folded up and lightly taped to the hull to protect it from the plaster sea.  Around the perimeter of the board a ¼” lip was created with wooden strips.

1.jpg.357f2e1eee8f7114b38d18b505d6af17.jpg

The space between the lip and the model was filled with premixed vinyl spackle from the hardware store.  The tub of product can be seen in the left of the above picture.  Three layers were needed to reach the full depth of ¼” since the plaster shrinks a bit and cracks when applied too thickly.

2.JPG.1592a92b513b620233be343c9d77fe58.JPG

The plaster was shaped to illustrate a moderately calm sea.  In the middle layer a palette knife was used to impose some swells and waves, but nothing too choppy.   The final thin layer of plaster was textured with a damp sponge as it dried to show the random small peaks and valleys of a moving sea.  I used a piece cut from a large wallpaper sponge which has a lot more large open holes rather than a denser kitchen sponge. 

3.jpg.64e18ed8019cf0234a7cb1d2b97f3aac.jpg

The texturing process was repeated several times until I was satisfied with the results and the plaster layers were fully built up.  This process can be continued as many times as desired, and even removed and redone, all without danger to the model itself.

4.JPG.b259861ff141fcd12975db1ce049ea4a.JPG

When the sea was dry the model was removed, the plastic wrap discarded and the model replaced.  Any gaps were filled and the bow wave was laid in with a small spatula.  Now the coloring could begin. The first color was straight black, laid into the deepest hollows.  Although most were generally parallel, random spots and lines were painted on as well.  I took the opportunity to paint the lips and edges as well.

5.jpg.7caa7b23aea32a4fcbfc582a3b752df0.jpg

Medium blue was painted over the whole surface, followed by dark green.  The tops of wave peaks were left white, as was the wake around the ship.

6.jpg.d79a6d080b935fd1fc73b89abbf64f0f.jpg

These rough colors were tempered by multiple coats of gloss Liquitex medium tinted with color.  Dark blue was applied several times, and light green as well.  Flat white highlighted crests, and even some deeper foam.  These latter were ‘sunk’ into the sea with more transparent layers of blue and green.

7.jpg.c74d936122ed36461fd9892f62cd5985.jpg

Along the sides of the ship there was little in the way of wake, the ship moving slowly as it approached harbor.  There were some diagonal wakes shown where the pressure waves would have impacted the hull, but these were severely muted with green tinted gloss.  Similarly, the water alongside the hull was lightened to show its disturbance by the ship’s passage.

8.jpg.498cdbaba88b53dc3057f8f933974655.jpg

At the stern the chop from the four propellers was mottled with white, stippled with a dry brush and, again, toned down and ‘sunk’ with tinted glaze.

9.jpg.6ff5efc9ad8f8cc217a0248ecd4ca0fd.jpg

The beauty of this method is that the colors and tints, and even the white highlights, can be altered and adjusted almost indefinitely until the desired shape, color, tint and reflectance is reached.

10.jpg.14bfd99d2e210ace7cd2df1df54d289b.jpg

With so many transparent and translucent layers, the water looks deep and changes hue with changes in light and viewing angles, just like the real sea.

11.jpg.d7af9db54a53213f05b9b10e9682a38d.jpg

So here she is.  Finished.  The troop ship, port side.

12.JPG.e3d2f5851efb5eff989044cb2000583b.JPG

And the ocean liner with the photo reversed to show the same port side.

13.JPG.6991c729ff4565ed94ca872727e6b972.JPG

The model’s bow showing the contrasting presentations.

14.jpg.fb49e00ee5a3d313d92635cda1972297.jpg

And the photo cropped and mirrored to show how each might have been seen as a whole ship.

15.jpg.7df68d7694a5a1f13ee2afe413cb9bca.jpg

16.jpg.eb1f1dd7b610d48ce5440e3299966d69.jpg

So now I bid a fond farewell as she sails off to her permanent home in the museum of the American Merchant Marine Academy at King’s Point, NY, on the shores of Long Island Sound. 

17.jpg.e725a555e582ff14ad2d1b488d2323f2.jpg

If you can, it is well worth a trip to this wonderful little museum.  You can also book a tour of the school where you can view many more excellent models and even take the helm in a bridge simulator.

 

Meanwhile, I have been working on the next project for the museum.  It is a Great Lakes whaleback steamer called the SS James B. Colgate.  It was a bulk grain and ore carrier launched in 1892 and sunk in a storm in 1916.  I will post photos soon.

 

Till then, thanks for following along.

 

Be well.

 

Dan

 

 

Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser

 

Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS OneidaSwan 42 racing yacht  Queen Anne's Revenge (1710) SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914),  James B Colgate (1892),  POW bone model (circa 1800) restoration

 

Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas

 

"Take big bites.  Moderation is for monks."  Robert A. Heinlein

 

 

Link to comment
Share on other sites

Dan = excellent, but I am sorry to see the journey end, the sea looks perfect. I look forward to the next project.

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Congratulations on another outstanding model Dan. It’s been a real pleasure to follow your log. I look forward to the next.

Link to comment
Share on other sites

Beautiful model Dan and a very interesting and educational log. Congratulations on its competition. Look forward to your next build.

 

Gary

Current Build   Pelican Eastern-Rig Dragger  

 

Completed Scratch Builds

Rangeley Guide Boat   New England Stonington Dragger   1940 Auto Repair Shop   Mack FK Shadowbox    

 

Link to comment
Share on other sites

Beautiful work, Dan.   I love the photoshopping also. I wish New York wasn't so far away.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

  • 1 month later...

Thank you for your wonderful explanations of how to turn a BoGP into a beautiful model......

 

It was an education.......

 

Very well done....

 

EG

Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale

In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale

Completed: M8A1 HST  1930 Packard Boattail Speedster  M1A1 75mm Pack Howitzer  F-4J Phantom II Bell H-13's P-51B/C

Temporary Suspension: USS Gwin DD-433  F-104C Starfighter "Blue Jay Four" 1/32nd Scale

Terminated Build: F-104C Starfighter

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Quote:

"Relish Today, Ketchup Tomorrow"

Link to comment
Share on other sites

  • 8 months later...

 

Hi to all who followed this build log.  I hope you enjoyed the journey, and I thank you for all the likes and comments.

I have just posted the first piece of a new log of building the Great Lakes whaleback steamer SS James B. Colgate (1892)

If you want to follow along just click on the ship's name in the 'current build' line of my signature below.  Everyone is welcome.

 

Stay safe and well, and a Happy Thanksgiving to all.

 

Dan

 

 

 

Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser

 

Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS OneidaSwan 42 racing yacht  Queen Anne's Revenge (1710) SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914),  James B Colgate (1892),  POW bone model (circa 1800) restoration

 

Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas

 

"Take big bites.  Moderation is for monks."  Robert A. Heinlein

 

 

Link to comment
Share on other sites

  • 1 year later...

Great build log, just read your NRJ article happy that everything was posted here on your build log as pictures here are much easier to look at details here than in the Journal!

 

Beautiful build 

Regards 

The Learner

 

Cheers, Guy
The Learner
Current Member NRG,SMA

 

Current Build: HMS Triton 1:48 on line

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...