Jump to content

Recommended Posts

Hi John,

 

What I like to use is a sanding block to bevel the edges of the bulkheads. I take on two frames at a time and sand in both directions. Check the bevel at each frame with a short length of plank that covers 3 or 4 bulkheads and make sure the plank makes complete contact with the edges of the bulkheads.

 

The sanding block I use is made by Xacto. I love it and have used it for many years for all kinds of sanding work. I use 80 or 100 grit sandpaper for this particular job. A dust mask is also a good idea...

 

Good luck. I hope this helped.

 

Peter

IMG_1349a.JPG

IMG_1352a.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...