Jump to content

U-552 Type VIIc Submersible by yvesvidal - FINISHED - Trumpeter - 1/48 - Plastic


Recommended Posts

2 hours ago, jgodsey said:

And, the toilet roll is going the proper way.  Well done Sir!

I see I’m not the only one that realizes there is only one logical way TP rolls should be installed.  Can you talk to my wife?

Edited by Landlubber Mike

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

On 7/18/2019 at 1:45 PM, popeye the sailor said:

no coat are coming for you Yves........can't prove you lost it yet.   to be certified,  you need to insist that the changes in your behavior is normal........and that everyone else around you are strange.   secondly........your aware of the changes,  and that would indicate that you still have sound mind.

 

nice try........keep modifying  ;)    nice work by the way!  

That sounds a bit like "Catch22" Denis.You are done for Yves keep working Sir ;) Kevin

Link to comment
Share on other sites

The way the roll feeds is also determined by if you have cats (or dogs)! If you do, you set it up to feed from the back, this helps prevent the pet from convinently unrolling it for you!

Link to comment
Share on other sites

super nice! :) 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Not much progress since I was out of town. Still working on the bathroom and the Officers quarters: 

DSC03863.thumb.JPG.f53df1dffec16a186fcd3bb25767714a.JPG

DSC03865.thumb.JPG.b0334d59c435a35fbb0dd7b6d2de5311.JPG

DSC03869.thumb.JPG.a6139376e715202f1b29efbb31f0569c.JPG  DSC03870.thumb.JPG.287bb276dfadbf60d04a5c2b6846f50d.JPG

The toilet apparatus was far from being easy to use. Among the crew, a voluntary sailor was in charge of operating that delicate and precious "resource", especially when submerged. It is important to realize that the flushing could only be done at periscope depths and that deeper dives required the use of the internal sewage tank or pails distributed among the crew, when total silence was required.

 

The following explains (in the language of Goethe) how to operate that "facility": 

toilet.jpg.a590e84070599b1d59064b763656397e.jpg

For most sailors, the best was to do everything outside and it is interesting to note that the deck railing was designed for that specific need: 

vie6.jpg.9a3d0381e007f5489175c02d8e53e582.jpg  11649234123_743d1c7034_b.thumb.jpg.2158099d2288e1f7f21452b51df62a66.jpg

When nature calls.....you have to bend to it!

 

Yves

 

Link to comment
Share on other sites

20 minutes ago, cog said:

Do you have a larger readable copy of the instuctions?

Sorry, I don't. The U-Boat Owner's Workshop Manual by Haynes has a very detailed description (in plain English) on how to operate the John's. It is very complicated and that is why one sailor was responsible for its correct working. The Haynes Manual describes also the kind of chaotic atmosphere surrounding the Restroom, before or shortly after an attack. One place for a crew of 44 is not exactly luxury. The second toilet was usually fully packed with food and not accessible for its intended purpose.

 

I did not replicate the Haynes manual in this thread, because of potential Copyrights issues.

 

Yves

Link to comment
Share on other sites

Working on some more details of the Officers Compartment. It is taking a lot of time and progress are limited.

 

First, the lights for the Officers' quarter and the Radio/Sonar room. This is done on two separate circuits with common ground. These white LEDs requires close to 2.7 volts to work under 15-10 mA current. By placing them in series (four of them), I am getting close to 12 volts which will be the power source for this model. A variable resistor in each circuit will allow me to fine tune the light intensity of each room. When using only two LEDs, a larger resistor will be required. The reason why the Radio and Sonar rooms are not on the same circuit, will become apparent once the top floor is finished.

DSC03872.thumb.JPG.5ab6900298a8ed4acf41da272a068252.JPG

The putty is to prevent light leaks through the pressure hull. Once dry, it will be painted dark grey.

 

Then, the canon stand: 

DSC03873.thumb.JPG.5a6e9de605443aa69a41b9c360aedd90.JPG

It will be barely visible but I am happy to know that there is some of it.

 

Then, a few details on the front bulkhead. I have removed the door that was preventing to get a glimpse of the John's (through the food closet) and will most likely glue it shut, isolating this quarter from the noisy and stinky front torpedoes compartment.

DSC03874.thumb.JPG.366f68874becb5537bcf9a4c52fe50bc.JPG

In the ceiling, you can see the large air circulation pipes. One brings fresh air to the front Torpedoes compartment, the other one expels the polluted air from it. Air circulation is mostly done by two large fans located in the Machine compartment.

 

Finally, a close look at the sailor checking the contents and good condition of the ammunition. Next to him, the inner fuel/diesel tank. 

DSC03875.thumb.JPG.2ba717a17022c264b20a62fe13ab8c9a.JPG

Once the top floor is installed, it will be almost impossible to see anything down there.

 

Yves

Edited by yvesvidal
Link to comment
Share on other sites

lol i vowed never ever ever to build a Sub, but i dont know now,

 

The heads again brought back memories of living at sea and the agro they caused, as the sanitary tank had to be blown overboard not pumped, and had to be done at periscope depth during domestic routines, if the toilet/head was not shut off properly the sewage tank would be emptied into the compartment

 

we even had showers on them, but in 8 years i never saw them used once, as they were a beer stowage

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 

 

 

HMHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   U552 German U Boat - Trumpeter - 1/48  Amerigo Vespucci     1/84 - Panart-   HMS Enterprise  -CAF -  1/48     

Finished     

St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished   Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Link to comment
Share on other sites

Finally, the Officer Quarter is almost finished. I was starting to run out of steam on this one....

The roof is the only part that needs to be glued but I wanted to leave it open so that I could show you the interior. I made two mistakes on this module, despite some improvements: One cabinet is not in the right location, but that was necessitated to allow the viewer to see more easily inside. The second one was by drilling a hole in the sonar equipment and destroying the micro-LED located inside. So, the Sonar screen no longer lites. I could not fix it....too many part to un-glue.....

 

First, a recall of what the compartment should look like: 

officers.png.fc6c87e964b3b22f88ff8da210d383b0.png

The following is what is provided in the kit:

DSC03891.thumb.JPG.42e387848c70f42aeda8d6538df1ee7b.JPG

As you can see, there is a lot of empty space and an oversized table in the middle of nowhere. Overall, it is quite a departure from the original blue-print. Therefore, using the extra parts I have, I decided to pimp up this compartment a little bit. Here are a few pictures of the construction phases: 

 DSC03878.thumb.JPG.159385a11550823bf1b24c2753f1c80e.JPG

Radio compartment. As you may remember, because of my way of building that section, I have to allow the floor to slide between the two bulkheads. Therefore nothing close to the bulkheads can be assembled.

DSC03881.thumb.JPG.2806eaa3722a452a03fe8d10cb708e7b.JPG

Sonar compartment with the sonar screen (no longer working).

DSC03882.thumb.JPG.f500d07dd1b6be210b7672cf68b7d3c2.JPG

Radio equipment. Micro-LED behind the large dial.  Basically, the part is grind to open completely the screen, a clear piece of acrylic is glued and the decal is placed on top. The same was done on the sonar screen, with an unfortunate mishap.

 

And now some views of the almost finished section: 

DSC03883.thumb.JPG.1ee02e11558db80b56a03a052a2ad754.JPG  DSC03895.thumb.JPG.232240825ed2bba4eaa6d46bc3ad8ac4.JPG

The captain quarter still needs to be detailed below: 

DSC03885.thumb.JPG.0c8678cc54f36fa3eae7cdc359cca132.JPG

DSC03886.thumb.JPG.af66d4a4a71342cb78d123e649de7ecf.JPG

DSC03887.thumb.JPG.fe93524d520cd516089aa86a69f9c778.JPG

DSC03888.thumb.JPG.d996be3456b6579bd741a35c60e02f36.JPG

Captain Quarter completed:

DSC03896.thumb.JPG.8b1693bed6a35efed12e1c5f1b7c32b3.JPG

On the bed, two big binders published by the Kriegsmarine secret service, describing the characteristics and appearances of most known enemy ships. On his desk, the booklet containing the Enigma machine codes. The Captain had the only bunk with a curtain for some privacy. The location of his cabin was also across the hallway from the Radio and Sonar officers, for immediate response and actions.

 

More views of the finished module: 

DSC03892.thumb.JPG.2d592c6a026d27a90c8d8ba4dd0e4953.JPG

DSC03893.thumb.JPG.7c9e35b21227c421c85a87969454499f.JPG

DSC03894.thumb.JPG.d6c89387a1d23b95aa21cbee8b9f8deb.JPG

DSC03897.thumb.JPG.446c7b1f44dde9883506a0e275646f4c.JPG

DSC03898.thumb.JPG.c08b848b96f1ae5fd0ca2121ae1e2016.JPG

A piece of square styrene has been placed beneath the main floor to give it a more realistic look. I just cannot stand these flat floor provided by Trumpeter: they look so fake and unrealistic.

 

I will be placing the roof soon, connecting all the electrical wires and call it a day, for that long and complicated module. Our next efforts will most likely be centered around the main hull, for a change.

 

Yves

 

 

 

 

 

 

Edited by yvesvidal
Link to comment
Share on other sites

Amazing.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

amazing build

 

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 

 

 

HMHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   U552 German U Boat - Trumpeter - 1/48  Amerigo Vespucci     1/84 - Panart-   HMS Enterprise  -CAF -  1/48     

Finished     

St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished   Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Link to comment
Share on other sites

Excellent work!  The pinups appear to have been well researched 😉

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

1 hour ago, Landlubber Mike said:

Excellent work!  The pinups appear to have been well researched 😉

Yes, it is all WWII era German material  approved by the Kreigsmarine 😉

 

On the desk of the Captain, is a 1/48th scale reduction of the following book, used to enter the Enigma codes: 

enigma.jpeg.2ebb69a3742b0a9445df5f3556fbf7b0.jpeg

On his bed, are the two official U-Boot Target Recognition Manuals, specifically used while using the periscope or binoculars: 

binders.jpg.eaaa2016c263813c2bfd63de6bb2c04e.jpg

For the girls, you can find them easily on the WEB as well as the Adler magazine:

Adler.thumb.jpg.1cc8d421208f9ebd9fcd26066a7f1ab2.jpg

Thanks for all the encouragements and Likes!!

 

Yves

 

Link to comment
Share on other sites

great job on the finished module Yves........you did a superb job of simulating the wood  :)    lighting it is a very nice touch!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

On 5/30/2019 at 2:16 PM, yvesvidal said:

Folks,

 

I am afraid there won't be much updates for a while. I am debating how to build the rear electric motor compartment and wish to present both motors.

 

Trumpeter really simplified this compartment with just one motor and very few other parts. I suspect that this was their last module and they probably had too much rice alcohol in their system, when designing it. They could have included both motors, both clutches and both shafts but decided to go cheap and not provide them. 

 

I am trying to obtain spare parts from Trumpeter and that is a major challenge. Some people have made it, most could not get anything. I have also contacted one person who built that same kit, without the interior and offered to purchase the internal parts. There, again, no response.

 

I may have to fabricate the parts myself, but it will never reach the level of precision of the molded injected parts. So, I am revamping the compartment, to place in the front what would have been relegated to the back of the module (a la Trumpeter). 

 

If anyone has a lead to purchase sprues X, Y and V, please let me know. Ideally, and if I could afford it, it would be worth buying two kits, keeping some sprues and re-selling the rest for someone who wishes to build the external hull only.

 

Decisions, decisions......

 

Yves

Hello, to obtain a complete engine do I need one of each x,y and v sprues or are there multiples of each and what combination please?

I have been in contact with Joanna at trumpeter spares and ordering the parts is quite reasonable in cost.

Link to comment
Share on other sites

On 8/17/2019 at 4:59 AM, amateur said:

I already knew that subs are not very spacy things, but the way you modl yours does show the living space very convincingly.

Jan

Yes, these type of Submersibles were really tight and small. The watching of Das-Boot movie will convince you of the almost inhuman conditions these poor sailors were enduring.

 

Yves

Link to comment
Share on other sites

Major progress on the hull: the paint, or at least the first phase.

 

As indicated before, I decided to go with Humbrol acrylic paints for the hull. These paints are getting a very bad rap on the Web and in the forums, because they are a far departure from the Tamiya and Vallejo paints. They are very thick, almost gooey in their appearance and require a significant amount of thinner to airbrush them. The good part is that they have the right color, that is very hard to find anywhere else. In retrospect, I should have used the enamel paints from Humbrol but decided to stay "green" as most as possible.

 

The paints were ordered from Europe as they are not yet easy to find in the USA.

 

The top of the hull requires the Matt 64 from Humbrol, which is one of the closest color to the Hellbrau used by the German.

DSC03913.thumb.JPG.7b66df79916c284709d196359cdeba11.JPG

The bottom of the hull has been determined by a few Expert European modelers to be the following mixture: 

Two cans of Humbrol Matt 96, plus one can of Humbrol Matt 33 and one can of Humbrol Matt Black Green 40.

DSC03912.thumb.JPG.1dfa91732130a484d46a9b3372ba0935.JPG

Now, for the thinner, Humbrol recommend of course their own thinner. The problem is that it cannot be shipped to the USA. Therefore, I tried different mixtures before committing to the paint on the model: 

 

- Water....runs too much and makes the paint translucent almost. It would require a lot of layers which is not the easiest thing to do on such big hull.

- Tamiya thinner..... Worked alright, but somehow, my airbrush clogged a lot. I suspect that the Tamiya thinner was not strong enough  to thin the clumps of that very thick paint.

- 70% alcohol ..... I suspect that this was too much alcohol and the paint was dry before hitting the surface.

 

After searching the various foreign forums, I finally found the ideal thinner: Vodka! Yes, Vodka is 40% alcohol and mostly water. Some people are claiming that it works very well after a glass or two....

Not wanting to run to the local ABC store, I fortunately had a left over of 50% isopropyl alcohol and decided to use it. With about 35 PSI of pressure on my Paasche, the paint sprayed very well and did not cause many runs. Needless, to say, you need a very large bottle under your airbrush to contain 4 cans of paints and the equivalent in volume, of Vodka.

 

The top portion of the hull was done first: 

DSC03908.thumb.JPG.8dbae3fb453889d77aefe24b63aac7a4.JPG

DSC03909.thumb.JPG.dbd327722ff8efcc731400f3045d153a.JPG

DSC03910.thumb.JPG.336b8f73037ed02984614e229473768d.JPG

A lot of masking has to take place: 

DSC03911.thumb.JPG.31873295a524af6e87ecadb2dfe97840.JPG

And finally: 

DSC03914.thumb.JPG.2cb94128a0bd696fc42252ae3f26e4a9.JPG

DSC03915.thumb.JPG.ae4a82086b862650ddf5f45a8c6cc8af.JPG

DSC03916.thumb.JPG.cc139616be4e0f593197277fdc7d37ad.JPG

DSC03917.thumb.JPG.ad2d11cf1831cd8f327771a2dd61e4d1.JPG

DSC03918.thumb.JPG.67b115edc0755a8ddd6341fcaf1f3c3e.JPG

Now, I need to learn the skills of weathering and rust.... The Deck will be painted last, as it still needs a lot of work and details.

 

Yves

 

 

 

Edited by yvesvidal
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...