Jump to content
yvesvidal

U-552 Type VIIc Submersible by yvesvidal - Trumpeter - 1/48 - Plastic

Recommended Posts

Posted (edited)
2 hours ago, jgodsey said:

And, the toilet roll is going the proper way.  Well done Sir!

I see I’m not the only one that realizes there is only one logical way TP rolls should be installed.  Can you talk to my wife?

Edited by Landlubber Mike

Share this post


Link to post
Share on other sites
On 7/18/2019 at 1:45 PM, popeye the sailor said:

no coat are coming for you Yves........can't prove you lost it yet.   to be certified,  you need to insist that the changes in your behavior is normal........and that everyone else around you are strange.   secondly........your aware of the changes,  and that would indicate that you still have sound mind.

 

nice try........keep modifying  ;)    nice work by the way!  

That sounds a bit like "Catch22" Denis.You are done for Yves keep working Sir ;) Kevin

Share this post


Link to post
Share on other sites

Not much progress since I was out of town. Still working on the bathroom and the Officers quarters: 

DSC03863.thumb.JPG.f53df1dffec16a186fcd3bb25767714a.JPG

DSC03865.thumb.JPG.b0334d59c435a35fbb0dd7b6d2de5311.JPG

DSC03869.thumb.JPG.a6139376e715202f1b29efbb31f0569c.JPG  DSC03870.thumb.JPG.287bb276dfadbf60d04a5c2b6846f50d.JPG

The toilet apparatus was far from being easy to use. Among the crew, a voluntary sailor was in charge of operating that delicate and precious "resource", especially when submerged. It is important to realize that the flushing could only be done at periscope depths and that deeper dives required the use of the internal sewage tank or pails distributed among the crew, when total silence was required.

 

The following explains (in the language of Goethe) how to operate that "facility": 

toilet.jpg.a590e84070599b1d59064b763656397e.jpg

For most sailors, the best was to do everything outside and it is interesting to note that the deck railing was designed for that specific need: 

vie6.jpg.9a3d0381e007f5489175c02d8e53e582.jpg  11649234123_743d1c7034_b.thumb.jpg.2158099d2288e1f7f21452b51df62a66.jpg

When nature calls.....you have to bend to it!

 

Yves

 

Share this post


Link to post
Share on other sites
20 minutes ago, cog said:

Do you have a larger readable copy of the instuctions?

Sorry, I don't. The U-Boat Owner's Workshop Manual by Haynes has a very detailed description (in plain English) on how to operate the John's. It is very complicated and that is why one sailor was responsible for its correct working. The Haynes Manual describes also the kind of chaotic atmosphere surrounding the Restroom, before or shortly after an attack. One place for a crew of 44 is not exactly luxury. The second toilet was usually fully packed with food and not accessible for its intended purpose.

 

I did not replicate the Haynes manual in this thread, because of potential Copyrights issues.

 

Yves

Share this post


Link to post
Share on other sites
Posted (edited)

Working on some more details of the Officers Compartment. It is taking a lot of time and progress are limited.

 

First, the lights for the Officers' quarter and the Radio/Sonar room. This is done on two separate circuits with common ground. These white LEDs requires close to 2.7 volts to work under 15-10 mA current. By placing them in series (four of them), I am getting close to 12 volts which will be the power source for this model. A variable resistor in each circuit will allow me to fine tune the light intensity of each room. When using only two LEDs, a larger resistor will be required. The reason why the Radio and Sonar rooms are not on the same circuit, will become apparent once the top floor is finished.

DSC03872.thumb.JPG.5ab6900298a8ed4acf41da272a068252.JPG

The putty is to prevent light leaks through the pressure hull. Once dry, it will be painted dark grey.

 

Then, the canon stand: 

DSC03873.thumb.JPG.5a6e9de605443aa69a41b9c360aedd90.JPG

It will be barely visible but I am happy to know that there is some of it.

 

Then, a few details on the front bulkhead. I have removed the door that was preventing to get a glimpse of the John's (through the food closet) and will most likely glue it shut, isolating this quarter from the noisy and stinky front torpedoes compartment.

DSC03874.thumb.JPG.366f68874becb5537bcf9a4c52fe50bc.JPG

In the ceiling, you can see the large air circulation pipes. One brings fresh air to the front Torpedoes compartment, the other one expels the polluted air from it. Air circulation is mostly done by two large fans located in the Machine compartment.

 

Finally, a close look at the sailor checking the contents and good condition of the ammunition. Next to him, the inner fuel/diesel tank. 

DSC03875.thumb.JPG.2ba717a17022c264b20a62fe13ab8c9a.JPG

Once the top floor is installed, it will be almost impossible to see anything down there.

 

Yves

Edited by yvesvidal

Share this post


Link to post
Share on other sites

lol i vowed never ever ever to build a Sub, but i dont know now,

 

The heads again brought back memories of living at sea and the agro they caused, as the sanitary tank had to be blown overboard not pumped, and had to be done at periscope depth during domestic routines, if the toilet/head was not shut off properly the sewage tank would be emptied into the compartment

 

we even had showers on them, but in 8 years i never saw them used once, as they were a beer stowage

Share this post


Link to post
Share on other sites

Finally, the Officer Quarter is almost finished. I was starting to run out of steam on this one....

The roof is the only part that needs to be glued but I wanted to leave it open so that I could show you the interior. I made two mistakes on this module, despite some improvements: One cabinet is not in the right location, but that was necessitated to allow the viewer to see more easily inside. The second one was by drilling a hole in the sonar equipment and destroying the micro-LED located inside. So, the Sonar screen no longer lites. I could not fix it....too many part to un-glue.....

 

First, a recall of what the compartment should look like: 

officers.png.fc6c87e964b3b22f88ff8da210d383b0.png

The following is what is provided in the kit:

DSC03891.thumb.JPG.42e387848c70f42aeda8d6538df1ee7b.JPG

As you can see, there is a lot of empty space and an oversized table in the middle of nowhere. Overall, it is quite a departure from the original blue-print. Therefore, using the extra parts I have, I decided to pimp up this compartment a little bit. Here are a few pictures of the construction phases: 

 DSC03878.thumb.JPG.159385a11550823bf1b24c2753f1c80e.JPG

Radio compartment. As you may remember, because of my way of building that section, I have to allow the floor to slide between the two bulkheads. Therefore nothing close to the bulkheads can be assembled.

DSC03881.thumb.JPG.2806eaa3722a452a03fe8d10cb708e7b.JPG

Sonar compartment with the sonar screen (no longer working).

DSC03882.thumb.JPG.f500d07dd1b6be210b7672cf68b7d3c2.JPG

Radio equipment. Micro-LED behind the large dial.  Basically, the part is grind to open completely the screen, a clear piece of acrylic is glued and the decal is placed on top. The same was done on the sonar screen, with an unfortunate mishap.

 

And now some views of the almost finished section: 

DSC03883.thumb.JPG.1ee02e11558db80b56a03a052a2ad754.JPG  DSC03895.thumb.JPG.232240825ed2bba4eaa6d46bc3ad8ac4.JPG

The captain quarter still needs to be detailed below: 

DSC03885.thumb.JPG.0c8678cc54f36fa3eae7cdc359cca132.JPG

DSC03886.thumb.JPG.af66d4a4a71342cb78d123e649de7ecf.JPG

DSC03887.thumb.JPG.fe93524d520cd516089aa86a69f9c778.JPG

DSC03888.thumb.JPG.d996be3456b6579bd741a35c60e02f36.JPG

Captain Quarter completed:

DSC03896.thumb.JPG.8b1693bed6a35efed12e1c5f1b7c32b3.JPG

On the bed, two big binders published by the Kriegsmarine secret service, describing the characteristics and appearances of most known enemy ships. On his desk, the booklet containing the Enigma machine codes. The Captain had the only bunk with a curtain for some privacy. The location of his cabin was also across the hallway from the Radio and Sonar officers, for immediate response and actions.

 

More views of the finished module: 

DSC03892.thumb.JPG.2d592c6a026d27a90c8d8ba4dd0e4953.JPG

DSC03893.thumb.JPG.7c9e35b21227c421c85a87969454499f.JPG

DSC03894.thumb.JPG.d6c89387a1d23b95aa21cbee8b9f8deb.JPG

DSC03897.thumb.JPG.446c7b1f44dde9883506a0e275646f4c.JPG

DSC03898.thumb.JPG.c08b848b96f1ae5fd0ca2121ae1e2016.JPG

A piece of square styrene has been placed beneath the main floor to give it a more realistic look. I just cannot stand these flat floor provided by Trumpeter: they look so fake and unrealistic.

 

I will be placing the roof soon, connecting all the electrical wires and call it a day, for that long and complicated module. Our next efforts will most likely be centered around the main hull, for a change.

 

Yves

 

 

 

 

 

 

Edited by yvesvidal

Share this post


Link to post
Share on other sites
1 hour ago, Landlubber Mike said:

Excellent work!  The pinups appear to have been well researched 😉

Yes, it is all WWII era German material  approved by the Kreigsmarine 😉

 

On the desk of the Captain, is a 1/48th scale reduction of the following book, used to enter the Enigma codes: 

enigma.jpeg.2ebb69a3742b0a9445df5f3556fbf7b0.jpeg

On his bed, are the two official U-Boot Target Recognition Manuals, specifically used while using the periscope or binoculars: 

binders.jpg.eaaa2016c263813c2bfd63de6bb2c04e.jpg

For the girls, you can find them easily on the WEB as well as the Adler magazine:

Adler.thumb.jpg.1cc8d421208f9ebd9fcd26066a7f1ab2.jpg

Thanks for all the encouragements and Likes!!

 

Yves

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...