Jump to content

USS CONSTELLATION by Tschiller - Artesania Latina - Scale 1:85 - Kit Bashed back to 1797


Recommended Posts

Hello All,

First of all I guess I should state this is my first time building a wood ship. I received my Artesania Latina USS Constellation kit as a gift and after looking it over and getting ready to start I did some Interweb searches and came across MSW. I've been lurking on this site for about a month now looking at tips and other builds posted here. I have to say there are some Talented Builders on this site. So, after researching the USS Constellation I soon discovered that the Artesania Latina kit is really more or less the 1854 Sloop of War and does not really resemble the 1797 USS Constellation. With $12 dollars and Amazon's help I received a copy of Chapelle's "The American Sailing Navy" which has Humphrey's Building Draught for the 38-gun Frigates Constellation and Congress, so armed with what little information is available on the 1797 Constitution I began my build..........

20190224_114732.jpg

Link to comment
Share on other sites

First, with Humphrey's Draught as a reference and the help of drawing software I was able to make templates for the Fore and Aft bulkheads to replace what came with the kit. While mocking up the new bulkheads and trying to decide on how to proceed with the squared off stern of the 1797 ship vs. the rounded stern of the 1854 sloop of war, I decided that I would cut down all the bulkheads to the gun deck level so that I could build out a complete gun deck.....

 

So once I mocked up the False Keel and the newly cut down Bulkheads and measured, measured and measured. I determined that the False-Keel needed to be shortened and Bulkhead #12 needed to be removed. I then glued up the False-Keel and Bulkheads and made a template to cut out the Gun-Deck. After planking the 3 lower decks with 1/8" strips I glued them in after painting the exposed bulkheads black.

Then I attached and gun deck ( I also incorporated the Quarter Gallery decks with the gun deck to facilitate the building of the Quarter Gallery's, as the cast brass pieces that came with the kit are kind of pitiful....), built the bulwarks and gun ports, stern gallery and finished framing the Aft Spar deck bulwarks.

 

Next step is to continue forward working on the bulwarks and planking the gun deck.......20190308_104033.thumb.jpg.d590c861a3136a38c40dfeba4c1dedf4.jpg20190308_125311.thumb.jpg.9b28ad3e6c83ade792bb7c3c69069942.jpg20190308_104045.thumb.jpg.c31c06c73e62ff16948a8b94b6283bef.jpg20190308_125424.thumb.jpg.0c0495df010bc9cf3f5fa5c560087675.jpg20190308_125514.thumb.jpg.e1f708ba213ac652f94f5e80430ec14c.jpg

 

Edited by Tschiller
Link to comment
Share on other sites

Wow, for your first build at wooden ships she's looking wonderful!! Nice clean line for your adjustments in the decking also per your research.  I look forward to your build and following your work, Great start.

 

A interesting movie you might like:

 

Plus some plans which might help:

 

KS8ZG7d.thumb.jpg.9d689ae1e873e3c7ce2bd7024451073d.jpg

Some reference images of one built:

IMG_1515.thumb.jpg.c9f585a2985f28781bc647fe711c559b.jpgIMG_1517.thumb.jpg.ad97db5f98730ced3a5ea6354e396e21.jpgIMG_1518.thumb.jpg.b0ff8e9bae3aba0c1c67f7ef60892f83.jpg

Plus the museum:

http://benjielayug.com/2017/06/uss-constellation-museum-baltimore-maryland-u-s-a.html

 

Edited by Jonathan11

Current build project: 

CSS Alabama 1/96

https://modelshipworld.com/topic/20148-css-alabama-by-jonathan11-revell-196-scale-kit-bash-90-historical-accuracy/

Finished build projects 2018:

H.L Hunley 1/24

CSS Arkansas 1/96

Link to comment
Share on other sites

Jonathon, Thank you for the the encouraging words and the information on the ship. The photos come in handy as the Spar deck arrangement appears similar to the Constitution which is what I was assuming. I've ordered the USS Constitution AOTS book to use as reference for the details of building this ship.

 

Again, thank you, your reply is exactly what I was hoping would happen when I started this build log.

 

Todd

Link to comment
Share on other sites

Interesting concept.  I went the other way on my build of this kit to the 1854 version. I'll curious to see how this goes.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Thank you for the comment, Jim.

 

I was able to finish framing up the Bulwarks from mid-ship forward. I decided to plank the spar deck bulwarks around the gun ports vs open rail all the way around. I plan on railing mid-ship similar to the 1812 Constitution and forward of the gun ports at the bow there will be the timber heads, cat heads and splash guards.  So she is planked from the Gun Deck up, I guess it's official, the AL USS Constellation is now a 38-Gun Frigate!

 

20190310_165216.thumb.jpg.52c35b0640b00f91f381ccafeff06efd.jpg20190310_165100.thumb.jpg.61da1f895d5b8969c3e96ea7773b4a97.jpg20190310_165120.thumb.jpg.d82a8e24379fbb5804ec2ab1e2cda312.jpg20190310_165038.thumb.jpg.74658c5bc1fe8abe932145ba6b5c135f.jpg20190310_165027.thumb.jpg.202ab5bd546bdf71e765a47dc6549836.jpg20190310_165154.thumb.jpg.fc614ac5bb69a95ff8182936d62b51ea.jpg

20190310_164928.thumb.jpg.6c6810ac02a958c1807e9f1d1c765340.jpg

Link to comment
Share on other sites

Exquisite historical ship build. Keep up the fine work on her, if I ever have the time I will do the same for the Constellation. Been wanting to add it to my collection for awhile but have a few irons in the kettle for now and am enjoying your progress.

Current build project: 

CSS Alabama 1/96

https://modelshipworld.com/topic/20148-css-alabama-by-jonathan11-revell-196-scale-kit-bash-90-historical-accuracy/

Finished build projects 2018:

H.L Hunley 1/24

CSS Arkansas 1/96

Link to comment
Share on other sites

I have made some more progress on the Constellation, I fitted the keel, stem and stern post along with a rabbit and drilled and studded with toothpicks. Then I began planking on the inner bulwarks of the gun deck and after getting most of that done, I realized that the spirketting planks below the gun ports should be thicker than the planks above...... Not wanting to remove and redo it all, I ripped some strips of basswood just shy of 1/32" and applied them below the gun ports for the spirketting planks. Once the deck is planked and the waterway is put in it probably won't noticeable, especially with paint.

 

 

20190315_154632.thumb.jpg.ed5cd4f813be6e0d8ac682d1b2694d7b.jpg20190315_154649.thumb.jpg.f84750e3bb87c730d6811a80b1539f05.jpg20190315_154820.thumb.jpg.914f25e3eb794d00dba9aa43653fbe8c.jpg20190315_160917.thumb.jpg.1a7d9b79316f10721aca1a268a38cecf.jpg20190315_160951.thumb.jpg.7bd9c2920ff41243144ef2798a87d3fc.jpg20190315_160940.thumb.jpg.4f432909442ce432cdae3a6dbf955401.jpg20190315_160931.thumb.jpg.f7c88e5e56400c07a027dc89e924080d.jpg

20190315_154730.jpg

20190315_154629.jpg

Link to comment
Share on other sites

I have this kit in my closet for the future if i can ever get myself back into modelling. This kit is a bit odd as there are some major features that dont seem to belong to either version of the connie.  Since you are going back in time this might not be much use to you but i have a bunch of pics taken from a modellers perspective of interest of the late version down in baltimore.

https://modelshipworld.com/topic/15595-reference-photos-from-vist-to-uss-constellation-in-baltimore-md/?tab=comments#comment-484865

Current build:

Constructo Enterprise 1799

Completed build:

Artesania Latina Swift 1805

Started but on hold:

Sergal President 1760

Link to comment
Share on other sites

Thanks for the link, stripehunter. Those photos have a lot of useful details and may come in handy.

 

So before I moved on to planking the hull I decided to take a break from planking and work on something a little different. So I cut some cherry strips and fashioned a Rudder Cover. I don't think it turned out too bad.........

 

20190317_153040.thumb.jpg.31bf34bf47f45faf699bfc5760a049e2.jpg20190317_153018.thumb.jpg.a5015c213ad1d02be0ef413db17790c1.jpg20190317_152403.thumb.jpg.63ff3c265aa5b3e02c546f9aa0418058.jpg20190317_152438.thumb.jpg.a7dfc489167640fe4897b43e6c66d6dc.jpg

However, I wasn't really satisfied so I went for more detail.......

 

20190317_152906.thumb.jpg.4c5d9522420b6392b9c8be646f0ab2d3.jpg20190317_152828.thumb.jpg.865ec956135dd2647518baf8c7d7ae61.jpg20190317_152521.thumb.jpg.b7e54ceebedd8c5a46e546a3b9ce74c7.jpg20190317_152549.thumb.jpg.410a2725984d4158d196d57eacee62cc.jpg

There are 18 pieces of wood assembled to make this one.... I think I'll keep it.

20190317_152830.jpg

20190317_152846.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Good Morning all. Well I was able to make some progress on the build in between spring yard work.....

 

I decided to plank the hull in 3 sections beginning at the waist then the bow and finally on to the stern. Have to admit that planking, although not that hard, is a little tedious to fit and glue a couple of planks then having to wait for those to dry before going on to the next plank.... But I'm coming to end of it and it seems to be coming out pretty well.

 

The center planks at the waist were easy and went pretty quick. I then measured out the bow area and divided by placing 3 strakes to make sure that I had the bulkheads fairing was good and symmetric.

 

 

20190324_171943.thumb.jpg.e9497d84ce14db00fba0d40ab8c9d110.jpg20190330_093018.thumb.jpg.47b8319ac4971f648cf0f13513ce253f.jpg20190330_093032.thumb.jpg.7ef8c1e01d30638804723bfa22e5dbec.jpg20190330_093042.thumb.jpg.f26dbe87e60c63f7ee284a87be1e55d9.jpg 

Link to comment
Share on other sites

Nice work.   As a "heads up", the cannon barrels in this kit look more like ray guns than cannon.  They can be changed with a mill or if you don't have  a mill, a rotary tool and file.

 

On 3/17/2019 at 4:29 AM, stripehunter said:

I have this kit in my closet for the future if i can ever get myself back into modelling. This kit is a bit odd as there are some major features that dont seem to belong to either version of the connie.  Since you are going back in time this might not be much use to you but i have a bunch of pics taken from a modellers perspective of interest of the late version down in baltimore.

https://modelshipworld.com/topic/15595-reference-photos-from-vist-to-uss-constellation-in-baltimore-md/?tab=comments#comment-484865

 

This kit was designed based on the way the Constellation sat in Baltimore up until the 80's (I think).  It was a fraud as they were trying to pass it off as the original frigate.  

 

Reference:  https://en.wikipedia.org/wiki/USS_Constellation_(1854)

and this report:  https://apps.dtic.mil/dtic/tr/fulltext/u2/a241916.pdf   

a bit of Googling will get you more info.

 

So for this build, he appears to be using historical info on the original.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

12 hours ago, mtaylor said:

Nice work.   As a "heads up", the cannon barrels in this kit look more like ray guns than cannon.  They can be changed with a mill or if you don't have  a mill, a rotary tool and file.

Mark, Thanks for the compliment. But what's wrong with the cannon barrels, if you squint your eyes until everything is fuzzy and take a quick peek of them they look fine..... I have been looking for new cannons because the ones with the kit do look goofy and there are only 22 of them (the rest are dummies). My plan is to have 28 of the 18lb cannons rigged on the gun deck leaving the bridle ports at the bow empty and rig 18 32lb carronades on the spar deck. Based on research it appears that the original frigates were most likely fitted with British cannons until a reliable American manufacturer came about in 1805/1808. The problem is finding the correct cannons in 1:85 scale....

 

I think I will do a sample order (only6) of these https://www.shapeways.com/product/CQH2XZ62Z/1-96-royal-navy-24-pounder-cannons to see what their quality is like. These best approximate the scale size of a 9' 18lb cannon. They also have the carriages and carronades that I may look at as well.

 

My intention with this build is to have a finished product that is "Historically Accurate" as possible with a level of craftsmanship to be proudly displayed...

Link to comment
Share on other sites

Good idea on the Shapeways.   You can take dimensions and snoop around to find similar sized ones in brass.   Maybe Chuck has something close (Syren Models).   

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

I finally finished the hull planking and I'm quite pleased with how my first planking effort turned out. It still needs some more sanding and then fill and final sanding, but I am really pleased at how the lines are straight and symmetrical.

 

I still need to add the wale planks but haven't decided if they should follow the curvature of the gun deck which would keep them in line the gun ports as seen on the 1812 Constitution, or if I should follow the 1794 Constellation draught which shows the wale planks having more of a curve rising above the gun deck on both the fore and aft of the ship, would this even be acceptable in ship building?

 

20190331_182525.thumb.jpg.e2d3f87d2ab2d3965312f716e5d9d64b.jpg

 

20190331_182601.thumb.jpg.d6eedd3ddf7dc6aff6d3fa31d7f6d576.jpg20190331_182613.thumb.jpg.0920da8db1e7954ee2f611b2fb42c31e.jpg20190331_182644.thumb.jpg.0b80bd5c2252d62368f7e7563c05f12e.jpg20190331_182708.thumb.jpg.cf19b584354810a0385fe2fb84732573.jpg20190331_182716.thumb.jpg.e740d6df024eda2744e23b4227c2815e.jpg20190331_182731.thumb.jpg.c2b1de53511a32d2bf896a3c6c410ac0.jpg

Link to comment
Share on other sites

  • 3 years later...

New to this site, and was reading this topic with much interest and awe, but it seems like it has just stopped at the gun deck. I myself, can take years to finish a model, so I'm wondering does the author have an update?

I have the same kit and I am interested in returning it to how it looked in 1845 when it helped the Kingdom of Hawaii take back control of islands from the British. This is before it was scrapped and used for parts to build the sloop.

I seem to recall reading somewhere that new sloop was intentionally passed off as the original Frigate to fool congress into financing a new ship build, which they would not fund because their budget was created for repairs and maintenance. So, instead of giving the new sloop a new name, they dubbed her the Constellation and claimed they were repairing her. Of course, I read that years ago, after I bought the kit in 2003, so I don't recall the source, and I may be thinking of the Congress or the Constitution. Anyway, great work, and I'm excited to see more of how these mods are going before I start my own.

Link to comment
Share on other sites

6 hours ago, Rkapuaala said:

New to this site, and was reading this topic with much interest and awe, but it seems like it has just stopped at the gun deck. I myself, can take years to finish a model, so I'm wondering does the author have an update?

I have the same kit and I am interested in returning it to how it looked in 1845 when it helped the Kingdom of Hawaii take back control of islands from the British. This is before it was scrapped and used for parts to build the sloop.

I seem to recall reading somewhere that new sloop was intentionally passed off as the original Frigate to fool congress into financing a new ship build, which they would not fund because their budget was created for repairs and maintenance. So, instead of giving the new sloop a new name, they dubbed her the Constellation and claimed they were repairing her. Of course, I read that years ago, after I bought the kit in 2003, so I don't recall the source, and I may be thinking of the Congress or the Constitution. Anyway, great work, and I'm excited to see more of how these mods are going before I start my own.

See my post above (#14)  about the this.  For 1845,,,, you will need a serious bash of the kit as is being done here.  Sadly, the author hasn't been back since his last post.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

  • 1 year later...

Hello,

 

So, after one of those life gets in the way induced hiatus, I have finally dusted of this project and started working on it again. I completed planking and sanding the Gun Deck. Need to finish planking the Quarter Gallery decks and then apply a finish to the decks. 

20240207_140144.jpg

20240207_140530.jpg

20240207_140542.jpg

Link to comment
Share on other sites

Completed planking the Quarter Galleries and finished the Gun Deck with 3 coats of Clear Lacquer.

 

Next I started on the ship's stove as I need to get all fittings and furniture together so I can layout the deck arrangement.

 

This is my second attempt on building the stove, I wanted to incorporate more details in making the stove body vs trying to add them to a square box. Next will be finishing the stove body, chimney, door details etc..... a work in progress.

20240209_080316.jpg

20240209_080340.jpg

20240209_080545.jpg

20240209_080554.jpg

20240209_080608.jpg

20240209_080647.jpg

Edited by Tschiller
Link to comment
Share on other sites

23 hours ago, ccoyle said:

Very nice planking work!

Thank you Chris.

 

Added more details to the ship's stove, need to pick up some brass for the rotisserie details and make the water condenser.

 

I also started the Hatch Coamings, they are made out of walnut but I'm not sure if I want to use a different (lighter wood) as I'm undecided about weather I should paint them or not...........

 

20240210_073229.jpg

20240210_085559.jpg

20240210_085603.jpg

20240210_085611.jpg

Link to comment
Share on other sites

okay,,,, with the completion of planking and sanding the Port side Wale the Wales are done.

 

The template on the Stem shows the difference between the kit Stem for the USS Constellation (1854 Sloop of War) and the Stem of the original draughts of the 1794 Constellation. As well the rudder from the 1854 Sloop of War is a complete miss....

 

So out to the garage to rip down some Walnut and cut the correct rudder and build up the Stem to match the template.

20240224_084858.jpg

20240224_084903.jpg

20240224_084604.jpg

20240224_084642.jpg

Link to comment
Share on other sites

Good Morning,

 

Some progress made on the Stem. I ripped down some Walnut to the thickness of the original stem and then cut out the new profile using a template from the USS Constitution, and grafted it onto the original Stem using toothpicks and epoxy. Now I just need do some filling (Walnut sanding dust and glue) and finish sanding to blend it in with the original.....

 

Also cut the new rudder to replace the rounded kit rudder. 

 

I believe the hull profile is now in line with the 1797 Constellation.

20240225_095957.jpg

20240225_095639.jpg

20240225_095922.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...