Jump to content
popeye the sailor

AMT 1923 coke delivery truck modified by Popeye the Sailor

Recommended Posts

this poor model will never know what hit it :ph34r:    ....and to think,  this all came about because of a 283 small block 'kit' that I bought from old models .com.  I mentioned to the admiral that I'd like to go to the local Hobby Lobby,  to look for it's intended victim.  she scoffed a bit,  but we did go.......and I was disappointed with the selection they had there.   the three in one kits that used to be common,  I am convinced that they are no more and customizer kits have taken their place.

    I was going to select the ZZ tops Eliminator kit......but it's too low to the ground.......and I don't have anything in the way of gasser suspension for it.   everything else had the A frame suspension.......that wouldn't do either.   I did finally settle for this kit....hopefully I can do something to get the body off the ground.

1418708509_boxart.jpg.a5c797f28559b4bf11540427b3093a68.jpg

I have a name for her already.........now I need to plan some decals for her.   as we were milling around,  the admiral noticed this model......

2022243402_boxart.jpg.180edc97af9ac64bdc6e803119e90a1f.jpg

she liked it............it's not something I usually model.  I pointed to another that looked like it had vending machines sticking out of it.......but she liked this one.  I grabbed it too.  it does seem to have a charm to it.......kinda like the beer wagon, or the Tijuana Taxi.  I enjoyed building them in my younger days.......and then another thought came to mind.  I recalled the old Woody I had built.....I had soaked and separated some plywood,  to fill in the panels.  not the most perfect job,  but it was interesting and fun to play with.   asking the admiral what she though of the body being made of wood,  she said it would be different.........she liked the idea :)   once the kit got into the house,  it didn't stay in the box long.........first order of business,  was to gather up the body parts and trace then on some 1/16 basswood.

1061160744_1.jpg.ace8bf3e23f813b0d7a0cb32e8cdb63f.jpg

I didn't even do a content review...not that many parts to speak of anyway.  it is a small model.  what there is of the frame was also assembled,  consisting of five parts.   the engine,  which is a model T engine,  was bagged.   I'll save it for something else.

6041441_2.jpg.0c3e169ff1fa7ca310c9ae7b6a8bee54.jpg

the floor,  sides and roof were all cut and assembly started after getting an idea of how the plastic parts fit together.

1953719658_3.jpg.0950b9deb011b9485a2b760f072beaca.jpg

I had drawn the oval windows.......for the model though,  I will make them round,  using some extra portholes from the Progress for the frames,  and window maker for the glass.  before long,  the basic body was assembled

1803891466_4.jpg.7c5c649a9574bf9862e3da838ca088f5.jpg

2135179712_5.jpg.7e99ca324c61c02701f5ce1832f1f335.jpg

1918539816_6.jpg.5618c47fee565430036d2b613004639f.jpg

I've done a little sanding here so far........more as I go along.    the roof has some camber to it.......I'll give it a bit more.

805314097_7.jpg.7153242c71e28e46550b29a38cf419a2.jpg

more sanding to go here as well.......  something told me that I should have added the partition wall behind where the seat will go,  before drilling out the windows.   ....and of course,  as I went up to a larger drill.....I heard and saw what I didn't want to see :( 

576562556_8.jpg.d3816d127b3f123dd9fa98c31270517f.jpg

knitting it back together with some Ca..........I think it is salvageable.......now!  let's get that partition in there!  I did more work on the roof ribs too,  in the meantime. 

1516106779_9.jpg.5941c18506bf9be0d7cd2b6d2a33c9c6.jpg

664268636_10.jpg.81d77b8e68feb0288d1a7b7c744c6944.jpg

I later filled in the top part of the partition,  but I did something later that made what I did useless......wouldn't have had to do it.   oh well  ;)   I did finally get all of the windows to size.......the back windows........

670977542_11.jpg.d909bb73298d8102ea451c996f657f9e.jpg

....and if the other side was a bit more cooperative,  I could have shown both sides.

1238248448_12.jpg.5f5a822426a1286e662fe50c282007eb.jpg

I even had a thought about a drag machine using this body........call it The Medicine Man.........or Gypsy {then I though of Cher, and nixed that one :D }   it's fun to think of all the possibilities for one silly little kit  ;)    I ended up having to pause here...hope to get back to her later.

Share this post


Link to post
Share on other sites
Posted (edited)

I did get back to her.......did a bit more.   I forgot to mention that the prices for these car models  is crazy!   both of these kits went for $29.99.......the last time I bought a car model,  they were around $22.00...   well......anyway,........after doing more sanding to the roof ribs,  rounding them off a bit more,  I decided to close up the ceiling above the seat.   that's what nulled the filler for the partition.

786604729_1.jpg.ea151790b7bba29942cce293d5fa6613.jpg

1152168462_2.jpg.a9180e975fef85922ccce1afb1bd354f.jpg

with the roof ready to go,  on went the skin :) 

711370503_3.jpg.2931d3a9d1f63b7f1a1c9cfde66ae135.jpg

I'm going to use the plastic parts for the fenders and firewall.   I will need to make the engine cutout on the body floor......and also to the firewall,  so I may have to make a cover for the interior.   the undercarriage needs some fleshing out before the fenders and frame can be added.  at this time,  I can then think about what to do for an engine.

1907256750_4.jpg.4e9d7f43d3b00d3f780b74b2f47556c3.jpg

the rear portion of the undercarriage framework was marked out........the thickness of the tabs was matched and the floor crossmembers were laid.

231794695_5.jpg.0a8512e89d22022a4f9335dcb6913612.jpg

the part behind the body is the floor........the tunnel riser can be seen.......it's not very high.  I won't need to make it look like that,  but there are a couple of other things that need to be done here as well.   hopefully,  I can get to it for the next update.   I really want to get some paint on the body.   it's driving me batty 

 

Edited by popeye the sailor

Share this post


Link to post
Share on other sites

If you're gonna poke holes in thin sheet wood, put some tape behind/over the openings to prevent tear out. And a dab of sanding sealer, too. Yep, you're all hot to trot to get going on this little jewel, but....that basswood will soak up paint. And paint both sides or it'll look like the pleats on an accordion, if you use acrylics. Yeah, I did a similar thing. I have a model railroad stock car I started, but I have to regroup on the build, since it got a tad warped. So used to Floquil and Scalecoat, (solvent based paints) and forgot the basics.

Share this post


Link to post
Share on other sites

thanks for the kind comments :)   I use enamels........it will get a primer coat and a light sand before the color goes on.  I don't want to lose the texture, but if it does,  I won't feel too bad.   while I'm working on the undercarriage,  I'm test fitting the plastic parts,  so I'll know what joins where.   you'll really have to post a log on one of your cars Ken.......it would be neat.  there are quite a few train folk here on the site.  on the old model kit website,  they have a good selection of these HO kits for sale.......I have been tempted  ;) 

Share this post


Link to post
Share on other sites

I've done a bit more on the coke mobile.......I am a bit hampered though due to a gash on my pinkie finger.  I did it at work.......nothing major.   I'm still waiting on the engine I ordered.......I may use it on this project.   just for chucks and grins,  I looked into the '40 sedan to see what the engines look like in that model........there is a stock flathead v8 and a souped up olds 394 cu in engine in the kit.  both engines would look big in the small engine compartment of this buggy....so I may have to alter it some.   I use enamels....to get a nice finish on the body,  I'm gonna need to seal the wood with primer.   I have a tin of white primer,  but I couldn't get the cap off.  so I settled for some Billing primer....I have one bottle left.   it covers really nice,  but smells the high heaven!

2015752202_1.jpg.16181fd6c805e4f4829a5882c0229bc0.jpg

I still need to paint the interior areas....

884847209_2.jpg.3d13c536102db05d15958d470283e4b7.jpg

I only have flat red.......I could go over it with clear lacquer and still get a nice shine.   I've also seen this model in white,  and it looks really nice too.  I want to do some trim work on the body after painting,  some 2 mm thin strip painted gold will do the trick.

789481316_3.jpg.9aab52dbade6bba32036d30725b7f377.jpg

the fire wall will need to be altered........I removed the plastic inside the raised outline.  the top of the fire wall frame was flattened to fit inside the roof edge.  the fenders,  which will also be plastic,  will need to be modified as well.

1966628147_4.jpg.edce644faa82a46e91e5d2e8c4cfc094.jpg

as I'm fitting all this together,  I'm test fitting the parts for the original model.   there are few tabs to guide how the body and frame assembles.  the engine,  frame and drive train is assembled.........the body and fenders are assembled separate,  and then the two are fitted together  to pretty much finish the model.   I need the engine to get the dimensions for how deep the fire wall cover needs to be.  until then,  I can't do much more.  this model has a relatively short wheel base.  they just shipped my order yesterday.......... kinda hoping that there is an engine option for the Sox & Martin kit.......but I'm not holding my breath.  I may also need to make some custom exhaust too.

Share this post


Link to post
Share on other sites

Another cool build to follow...you mentioned the Beer wagon, I found this in my storage locker the other day...1600600146_Paddywagon.jpg.239201c5d813f14540a60da5a9eb2041.jpg

Missing the rolling stock though...no idea what it was used on

you gonna plank the sides or just leave it as wood sheet

Share this post


Link to post
Share on other sites

...add ten more like to this one!  love it.........haven't seen that kit around at all!  what rolling stock?........looks like all the parts are there.  actually,  I may have to eat my words.......I found it.......and I believe it may be available {I didn't look}.   but I did mention the Garbage truck......a wild take on a surf buggy.   check this out  ;) 

RMX-4198-3.jpg.c4db4b3f5eeb98ca450d79f0992d77fb.jpg

https://www.modelroundup.com/Monogram-Garbage-Truck-Surf-s-Up-Model-Kit-p/rmx-4198.htm

 

I'm going to leave the sides bare......just do some sexy molding.   there are decals to add,  that will break up the manotany.  I also need to outline the rear doors.   I was going to post the news,  but I can tell ya.......I got the engine!   ohhhhhh,  I like the Sox & Martin kit!  got some nice detail,  and the decals look pristine!  I assembled the model T engine.........I also have the parts in the brake fluid already.

1267470880_engine1.jpg.0e57ba08707d012585f1927a27cbbe2f.jpg

1251382437_engine2.jpg.f08c68559d2b33d3649572140b21e915.jpg

1992243140_modelTengine.jpg.561af69bcbf039686819c9241990c089.jpg

I won't assemble it much more than this......I just need it for a size comparison.  the Chevy engine looks smaller than 1:25...I'll take them at their word.  I do recall this engine in a kit though......I do have my doubts that it was Revell {that's what they have it labeled as}.  I do have a feeling though,  that it won't be the supercharged version........that would make it too long.   well hang my head and cry..........I'm not doing too well tonight.......proven wrong yet again  :blush:  it is by Revell!

Vintage-Revell-Parts-Pack-1957-Chevy.jpg.a49ac82c9f39dbe25019d84bac8a06c0.jpg

 

Edited by popeye the sailor
more text

Share this post


Link to post
Share on other sites

small update here........I have been looking at the bottles with the part in 'em.   the engine parts seem unaffected by the brake fluid........the parts for the General though look ready to wash.  I will leave them in for one more day.........I may end up painting over the chrome.  I do find this rather odd......I haven't seen anything like this before.   

 

.....that was last night.........I left the computer without posting :blush:

 

today after work,  I looked at them again.  the part for the General are peeling and bubbled up.......ready to be brushed and cleaned.   the small block parts on the other hand,  still looked as they did when I put them in.  I said the heck with it and set up the cleaning area.   I ws surprised to find that the chrome came right off!  

1679697610_Wash1.jpg.ea7eb705dd3e07e85c0c5270b6b9a37b.jpg

1546921788_tobrdried.jpg.39a37a5777da7499cea11630c1dfb559.jpg

weird colored plastic........that's for sure  ;)   on to the next step!

Share this post


Link to post
Share on other sites

there are so many variables to figure out :blink: .......of course,  if I can pull off what I want to do,  it will be a drastic modification.  first,  to see if the length of the engine and transmission will affect how the fire wall will fit.....I already know I'll need to make a cover....which will affect how the interior is set up....which will affect the dash.   there isn't one,  but I'll need to make something for the steering column.  everything affects something else.   assembly started on the 283.

1919356880_1.jpg.1fd20ae265ca8b105e2db382399dae67.jpg

this so far is five parts......I will add the heads,  and then I can paint.  the tranny parts were put together.......the bell housing is just fitted in this photo.  I will start to paint the parts.  I'm going to go with dual carbs....if I did the blown version,  I'd have to lengthen the frame.  the heads are cemented in place on the engine.  

720775002_2.jpg.9990c09bdcbc41adb6062aa39968a134.jpg

861865776_3.jpg.33195b4fa637198d95bfc96b14d54656.jpg

the carbs are gold......the bell housing is aluminum......and a new metallic color for the tranny box and intake.......bronze.  :)   with the intake and transmission parts added to the engine,  I find that I will have to modify the drive train.  perhaps I can cut back on the tail shaft.  I have a mount for the engine.......it came with it.

722482248_4.jpg.a2cc666c297e79f789d6c11a47e71a65.jpg

the rest of the engine parts will be chrome......except the starter,  the distributor,   and the electric fuel pump.  I found that I was mistaken about the gloss red........I have some!  :)    the body was sanded and painted.

1292821179_5.jpg.ccc14f5f0e9dea5b8140362a13912ae1.jpg

1535852358_6.jpg.7fbea88db8f626203ae3e0ae2bd64c4a.jpg

I need to check and see if I still have some of the older window maker........the new bottle I bought is too watery and won't span this large a circle {the portholes}.  if not,  then I will need to try and cut the glass from some clear cello.

 

Edited by popeye the sailor

Share this post


Link to post
Share on other sites
27 minutes ago, lmagna said:

It's almost a shame to have to assemble that engine and hide all that internal detail. I'm almost surprised that it didn't come with a PE head and manifold gasket set! 

In the '90's, there was an edition of a 60's Chevy Nova by AMT that had an even more detailed small block chevy engine included. The kit came with an engine stand to display it outside of the car.

Share this post


Link to post
Share on other sites

I suppose it is only a matter of time before someone takes an engine like this and develops a PE set that has push rods, rocker arms, cams and crankshaft, along with all the other stuff needed to make the internal working of the engine. After all it is 1/24th or even larger scale not 1/350th! At that point it would be a crime to hide it under a hood in a assembled state! 

Edited by lmagna

Share this post


Link to post
Share on other sites

hey there gents!  thanks for the good word  :)    you know J........I looked up where to buy these engine kits.  I was surprised to find that they also have the Chevy Corvair engine!   rear engine......hmmmmmmm,  may be in the horizon ;)   that would be cool! :ph34r:

 

there were kits that had this much detail....but not many.  to me,  I think this was aimed at garage dioramas.........showing a torn down engine,  or in the process of repair.  it was probably a huge selling point.  for a modeler,  to have visionary and creative ability would be a huge plus.........likely the main reason why there are so many modelers assembled here ;)   to see how this model is looking at this moment........I'm feeling more comfortable that this isn't just a weird thought...more that I cared to chew.  the big hurdle is coming up.....to align the frame with the body,  and get it so it looks halfway decent.

 

though PE is aimed mainly at planes and ships.....I'm quite sure that it will creep into the model car market soon {if it's not already here ;) }.  update soon........likely the reason why I haven't much progress on the General  :D  :D 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to provide support to our members in their efforts to raise the quality of their model shipcraft.

The Nautical Research Guild puts on ship modeling seminars, yearly conferences, and juried competitions. We publish books on ship modeling techniques as well as our world-renowned quarterly magazine, The Nautical Research Journal, whose pages are full of articles by master ship modelers who show you how they build those exquisite details on their models, and by maritime historians who show you what details to build.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...