Jump to content

Le Gros Ventre by ChrisLBren - 1/36


Recommended Posts

Greetings MSW.    I am back after completing Chuck's Confederacy scratch after a 7 year build finished in 2016.  (he did give me some cheats on the figurehead and some sculptures....)  She is an incredibly designed kit - I learned a ton - and ironically it was built in several apartments while single with nothing but a crappy Delta scroll saw and an old Preac table saw, along with Xacto knifes.  Jeff Hayes perfectly milled wood helped a ton !  And then I got married and my twins were born which slowed down everything in 2013. 

 

I have always wanted to build a fully framed French ship and collected a full library of Ancre subjects (the 74 Gun Series, Monographs of the 74 timbers, Commerce de Marseille, and La Renommee).    So  after buying a house in the suburbs - I built out a workshop.  I gathered the necessary tools over the past few years -  Byrnes Table Saw, Thickness Sander, Disc Sander,  Proxxon Mill, Proxxon Planer, Wood River spindle sander and a Dewalt full size table saw to reduce my flitch of pear wood to usable size.  I have also collected Lie Nielsen chisels and its Lee Valley Sharpening system.  

 

So it seems I can't fail right ?  

 

I did...

 

Call it being a Dad of young twins or just sheer intimidation.  I could not complete the stem for La Renommee to my standard so I quit.  I then decided - maybe a simpler subject would work - so I began construction on La Jacinthe in 1/32 scale.  Not only did I have issues with consistency of enlarging the plans (thanks FedEx/UPS store) - I grew bored with its construction - I have already successfully completed several plank on bulkhead models. 

 

So I returned to the enlarged plans that Delacroix sent me for Le Gros Ventre in 1/36 scale - a noble subject - with nice lines, simpler sculptures and yet a serious challenge.  I have heard from several members on this forum that building fully framed in larger scale is easier...

 

So here is the start of my build log - it will be messy showing all of the mistakes in order to build a fully framed model.  Here are my results after 2 months of work - the last photo showing my useable parts.

Stern.JPG

Stem.JPG

Mill.JPG

Scrap Bin Grows.JPG

LGV Parts.JPG

Link to comment
Share on other sites

Good for you to be willing to go up the learning curve, Chris. There will be scrap (with and without the 'c'!), but the end result will be well worth it.

Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series  http://trafalgar.tv

Link to comment
Share on other sites

No more confusion caused by many models built in parallel. Let's hope this one will turn out great! The start is pretty good anyways.

Is that still your french pear? Looks very neat!

Edited by Mike Y
Link to comment
Share on other sites

Thanks guys - yes Mike - it is my French Pear - cuts beautifully.  

 

This really is a learning curve - I'm having to relearn how I build using for the most part the Byrnes tools, the Proxxon Mill and chisels.  I am finding the larger scale 1/36 a little more approachable.   So far its really challenging and I have yet to complete the keel and its assemblies !  

Link to comment
Share on other sites

I'll pull up a chair also, Chris.  A challenging project, learning curve, and and fun.  What more can we ask for?  My only suggestion is about the scrap box.. make if bigger than what you think you'll need and don't toss anything into the burn bin or trash.   I've found uses for most of the wood that when into mine.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 10 months later...
  • 2 years later...

Greetings Group,

 

I restarted this build in earnest beginning of August and have completed 20 frames (roughly 1/3rd of the total frames).  The frames have not been sanded or bias added, simply assembled (each frame is 12 parts and stacked) with some extra "fat along the bold line of the frame patterns.  

 

I carve out early a couple hours early 430 AM - 630AM before the kids go to school and my day starts - has been working really well so far !

IMG_0977.jpg

IMG_0976.jpg

IMG_0974.jpg

Edited by ChrisLBren
Link to comment
Share on other sites

Well done, and I am humiliated by your neat workspace. Mind if I follow?

🌻

STAY SAFE

 

A model shipwright and an amateur historian are heads & tails of the same coin

current builds:

HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style

Mediator sloop, 1/48 - an 18th century transport scratchbuild 

French longboat - CAF - 1/48, on hold

Link to comment
Share on other sites

Looks like a very good beginning, Chris. I was never up early enough when my daughter was young, and got no model-making done for ten years. Most enterprising of you!

Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series  http://trafalgar.tv

Link to comment
Share on other sites

As mentioned in the Arsenal great and clean job Chris.

Auf der Werkbank:

Corvette La Palme (L'Amarante) von 1744 POF nach Plänen von Ancre

https://modelshipworld.com/topic/32046-la-palme-by-tobias-136-pof/

 

https://modelshipworld.com/topic/29843-le-coureur-1776-by-tobias-caf-148/


 

LE ROCHEFORT - Hafenyacht von 1787 1:36 von Tobias (Monographie von ANCRE)

 

Link to comment
Share on other sites

Welcome back. 1/36  scale. You must have a bigger bench than me. Very neat work.

Dick

Current build: 

 Le Gros Ventre 1:48 POF   http://modelshipworld.com/index.php?/topic/564-le-gros-ventre-by-woodrat-scale-1-48-pof-1767-french-exploration-vessel/

 

Past builds:

Mycenaean War Galley by Woodrat - 1:48 - Shell first Plank on Frame:https://modelshipworld.com/topic/33384-mycenaean-war-galley-by-woodrat-148-shell-first-plank-on-frame

Venetian round ship 14th century by Woodrat fully framed - 1:40 scalCompleted

https://modelshipworld.com/index.php?/topic/17991-venetian-round-ship-14th-century-by-woodrat-fully-framed-140-scale

Venetian Carrack or Cocha 1/64 by woodrat   https://modelshipworld.com/index.php?/topic/4915-venetian-carrack-or-cocha-164-by-woodrat        completed

United States Frigate Essex 1:64 POF   http://modelshipworld.com/index.php?/topic/4496-usf-essex-by-woodrat-scale-1-64-fully-framed-from-takakjian-plans/ - completed 

Yenikapi12 by Woodrat - 1/16 scale - a small Byzantine merchant vessel of the 9th century

https://modelshipworld.com/topic/23815-yenikapi12-by-woodrat-116-scale-a-small-byzantine-merchant-vessel-of-the-9th-century-finished/

The Incredible Hulc by Woodrat - an experimental reconstruction of a mediaeval transport

https://modelshipworld.com/topic/25641-the-elusive-hulc-by-woodrat-finished-a-speculative-reconstruction-of-a-mediaeval-merchantman-132-plank-on-frame/

 

 

 

Location: Perth, Western Australia

 

Link to comment
Share on other sites

Welcome back, I will follow your log with interest.

Regards Christian

 

Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36

On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777

Paused: HMS Triton, 1771 - 1/48

"Have no fear of perfection - you'll never reach it." Salvador Dali

Link to comment
Share on other sites

  • 2 weeks later...

They look really good when they are lying there. 😉

Auf der Werkbank:

Corvette La Palme (L'Amarante) von 1744 POF nach Plänen von Ancre

https://modelshipworld.com/topic/32046-la-palme-by-tobias-136-pof/

 

https://modelshipworld.com/topic/29843-le-coureur-1776-by-tobias-caf-148/


 

LE ROCHEFORT - Hafenyacht von 1787 1:36 von Tobias (Monographie von ANCRE)

 

Link to comment
Share on other sites

  • 1 month later...

After 2 months of consistent work - 63 frames are cut and assembled and ready for sanding/bevels. One partial stern frame remains to be assembled later.  I need to tweak both the stern keel parts to make sure everything fits snug and re do bow parts part h and i.  Then to cut the rabbet.  Thanks for stopping by. 

IMG_0995.jpg

Stern keel.jpg

Bow Keel.jpg

Edited by ChrisLBren
Link to comment
Share on other sites

Nice progress Chris!

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Very nice Chris wonderful work

Auf der Werkbank:

Corvette La Palme (L'Amarante) von 1744 POF nach Plänen von Ancre

https://modelshipworld.com/topic/32046-la-palme-by-tobias-136-pof/

 

https://modelshipworld.com/topic/29843-le-coureur-1776-by-tobias-caf-148/


 

LE ROCHEFORT - Hafenyacht von 1787 1:36 von Tobias (Monographie von ANCRE)

 

Link to comment
Share on other sites

Hi Chris, in answer to your question, yes the vice will fit the MF70 but you won't have much room to move upwards.

Auf der Werkbank:

Corvette La Palme (L'Amarante) von 1744 POF nach Plänen von Ancre

https://modelshipworld.com/topic/32046-la-palme-by-tobias-136-pof/

 

https://modelshipworld.com/topic/29843-le-coureur-1776-by-tobias-caf-148/


 

LE ROCHEFORT - Hafenyacht von 1787 1:36 von Tobias (Monographie von ANCRE)

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...