Jump to content

Recommended Posts

Using 1:48 as a bench mark=

scale              Vol            length          1 inch

1:48                 1                 1               0.0208

1:76                0.25             0.63           0.0131

1:96               0.125            0.5             0.0104

1:103             0.10              0.465         0.009

 

a model is a 3D

while going from 1:48 to 1:96  means that a part is 1/2 the length, it is also 1/2 the width and 1/2 the depth so the size of the part is 1/8

 

@ 1:96  a part that is 1:76 would be twice the scale

1:100 is probably close enough not to be noted.

Edited by Jaager

NRG member 45 years

 

Current:  

HMS Centurion 1732 - 60-gun 4th rate - Navall Timber framing

HMS Beagle 1831 refiit  10-gun brig with a small mizzen - Navall (ish) Timber framing

The U.S. Ex. Ex. 1838-1842
Flying Fish 1838  pilot schooner -  framed - ready for stern timbers
Porpose II  1836  brigantine/brig - framed - ready for hawse and stern timbers
Vincennes  1825  Sloop-of-War  -  timbers assembled, need shaping
Peacock  1828  Sloop-of -War  -  timbers ready for assembly
Sea Gull  1838  pilot schooner -  timbers ready for assembly
Relief  1835  ship - timbers ready for assembly

Other

Portsmouth  1843  Sloop-of-War  -  timbers ready for assembly
Le Commerce de Marseilles  1788   118 cannons - framed

La Renommee 1744 Frigate - framed - ready for hawse and stern timbers

 

Link to comment
Share on other sites

What do you mean by "the size is 1/8" ? The volume of the part ?

 

1/96 and 1/100 are close enough, there is only a 4% difference in length, however, the difference between 1/100 and 1/76 is 24% !

 

In other words, piece of 100 cm length would be in 1/100 scale 1 cm long, in 1/96 scale 1.04 cm, but in 1/76 scale 1.32 cm

wefalck

 

panta rhei - Everything is in flux

 

 

M-et-M-72.jpg  Banner-AKHS-72.jpg  Banner-AAMM-72.jpg  ImagoOrbis-72.jpg
Link to comment
Share on other sites

yes, by size, I mean volume.  Although, the difference in any one dimension is 1/2,  A model of ...say.. HMS Victory  at 1:48 .   compared to a model of the same ship at 1:96 -  it would take 8 models @ 1:96 to fill the volume occupied by the 1:48 copy.

NRG member 45 years

 

Current:  

HMS Centurion 1732 - 60-gun 4th rate - Navall Timber framing

HMS Beagle 1831 refiit  10-gun brig with a small mizzen - Navall (ish) Timber framing

The U.S. Ex. Ex. 1838-1842
Flying Fish 1838  pilot schooner -  framed - ready for stern timbers
Porpose II  1836  brigantine/brig - framed - ready for hawse and stern timbers
Vincennes  1825  Sloop-of-War  -  timbers assembled, need shaping
Peacock  1828  Sloop-of -War  -  timbers ready for assembly
Sea Gull  1838  pilot schooner -  timbers ready for assembly
Relief  1835  ship - timbers ready for assembly

Other

Portsmouth  1843  Sloop-of-War  -  timbers ready for assembly
Le Commerce de Marseilles  1788   118 cannons - framed

La Renommee 1744 Frigate - framed - ready for hawse and stern timbers

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...