Jump to content
Stevo79

HMS Triton by Stevo79 - 1/48 - POF 28-gun frigate by Steve

Recommended Posts

Hi Everyone,  

 

Yes another new chap here to the forum.  I have been lurking in the shadows for sometime reading. reading and researching as I am new to scratch building wooden ship models.  I am however an avid RC aircraft modeler and build and fly only scale gliders from 1/4 scale up.  The largest scratch built glider I have has a wingspan of 7.5m so no small foamies here.

 

Whilst this build goes on I also purchased the Hayling Hoy book from sea-watch and will be building this during the Triton build.  A little test bed really.  I hope to document this Triton build to a high level to ensure I have a beautiful replica once completed and I am certain I will have plenty of questions along the way so the more detail provided the easier it will be to gain assistance.

 

There isn't a whole lot to show just yet as I have only printed out a very small number of the large format drawings and have a ton to go until I finish printing them all.  I was thinking about not printing everything at once to save up a little space but I think it will be a lot easier to print them all out then check off each sheet with the master list to ensure I don't miss anything.  That's really all there is for now, I needed to get the build log started as it will give me the little nudge along to get things moving along nicely.

 

I would like to thank all the guys and gals out there that contributed to these drawings, they are very thorough and would have taken hundreds of man hours to put together so thank you all, especially at only 5 bucks, brilliant.  Anyway I better try to get some sleep its 3am here.

 

Chow for now.

 

Steve

Share this post


Link to post
Share on other sites

Hey Guys,

Well its been some time since I posted last due to life, plus being sick for the last 3 weeks hasn't been much fun either.  I have slowly been planning my attack.  I am going to build all the structural members from Tasmanian Oak and some mahogany in select areas for colour plush I'll find something to use for the extra areas that need variance of colour and tone.

 

So the construction started with the jig which was a breeze and has been constructed with some nice thick sturdy ply.

 

IMG_2372.thumb.JPG.85bf18fab43b3794cd0a00a9615368e9.JPG

Nothing special to see really just a jig.

 

IMG_2371.thumb.JPG.38f9b4ffac90f265ee14bc9aec54f489.JPG

I really didn't take any pictures of how to cut out the parts on the scroll saw as I am pretty sure everyone here knows how to use one of those, :).

IMG_2385.thumb.JPG.ff4390f5c1dd0ee60fa8b009fe035af5.JPG

here we can see all the keel peices cut from Tasmanian Oak and awaiting scarphs, I found a nice little tool in my tool box that is perfect.

 

IMG_2399.thumb.JPG.07e4494888b9b4165fe26387263b5b62.JPG

IMG_2387.thumb.JPG.d814cd751752019a8ce76c2df275c7c5.JPG

slowly coming together,  I was pretty happy with the scarph joints as I haven't completed many in the past but they look pretty good.

IMG_2394.thumb.JPG.67649a2af05496db58620c4f0aef0043.JPG

Well here we are the last few pictures of the keel complete awaiting the false keel which I am planning on using mahogany for.  Not sure if there was any variance of the timber used in reality but I dont mind it will show there is two separate components clearly.  Unless some of the experienced guys here know if the false keel was in identical timber as the keel.

IMG_2396.thumb.JPG.6eda4ada0283272d55f6a6af9bc2140f.JPGIMG_2395.thumb.JPG.1de2aac5b206138b97f147bf828d0aa9.JPG

Last picture, keel placed over drawings.

IMG_2397.thumb.JPG.483567a074b84aad33db49bbc4c48724.JPG

Thats it for now guys and gals, hopefully it wont be too long until my next post.  Next job is the false keel, setup the jig propoerly and commence work on the deadwoods and fore sections.

 

Until then.

Share this post


Link to post
Share on other sites

Off to a great start.  Excellent work on the scarf joints as they look darn near perfect from here.   False keeps are a "builder's choice".  I and others use a contrasting wood like ebony and other match with a lot in between the black and "wood of choice color".   So mahogany will probably look good.  

 

 

Share this post


Link to post
Share on other sites

Hey Mark, thanks for the input, much appreciated.  I will go ahead and use mahogany for the false keel.

Share this post


Link to post
Share on other sites

If it looks too porous to your eyes, think about making it out of oak and if it's contrast you want, stain it.  I've been doing the ebony stain thing lately as the ebony wood is just too nasty to work with. 

Share this post


Link to post
Share on other sites

Yeah I have never used the ebony wood but fro, all reports as well as being very brittle to work with isnt great for the ole health either.  I'll check it out tomorrow and see how it looks.  Out of interest does anyone know if they just used the same framing timber for the false keels or was it a softer wood designed to be easily replaced.

Share this post


Link to post
Share on other sites
6 minutes ago, Stevo79 said:

Out of interest does anyone know if they just used the same framing timber for the false keels or was it a softer wood designed to be easily replaced.

I cannot say what they did in Portsmouth for Triton but in the Caribbean and American yards it was common to use mahogany for the false keel. For example, Bermuda had a wonderful supply of local cedar which was excellent for shipbuilding but they still imported African mahogany for the keel components and American woods for the deck planking. 

 

Nice start on Triton.

 

Bruce

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...