Jump to content

Medway Longboat by oneslim - 1:24 scale - Bob W - FINISHED


Recommended Posts

  • 2 weeks later...

Part 8

 

I had a lot of yard work since before the holiday,  so just getting back to the workshop.

 

I made the bolsters and fitted them along with the cap rails.

Here they show the Starboard side done and the Port side inside marked out

353637688_20190604(Medium).thumb.JPG.dba69ec10cee1b4d53463e26a4a7d9a0.JPG

Port side outside mark out.

1624112989_20190604_1(Medium).thumb.JPG.9210894b2a7587517d0fc004273eff0b.JPG

View of the Bow.

1041002372_20190604_2(Medium).thumb.JPG.8ec76ec161fa7d12dd72f0e889776374.JPG

Overall view.

961785492_20190604_3(Medium).thumb.JPG.8fd0a7ab9c66a7bab7db56674a3bf49e.JPG

Stern View.

1737219313_20190604_4(Medium).thumb.JPG.ded2cab68411677a9a2ec43e867b9cee.JPG

Inside stern View.

131569397_20190604_5(Medium).thumb.JPG.849eb089d579c169960b5c2ab4d11777.JPG

 

I see much sanding in my future.

 

Thanks everyone for the comments and Likes.

 

Bob W

Bob Wescott

South Jersey

Link to comment
Share on other sites

8 hours ago, Chuck said:

That is probably the trickiest part of the build. 

 

Very nice Bob, You're on to a lot of fun stuff now!

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Nice work on the bolsters. Coming along great!

Jeff

 

In progress:
Medway Longboat 1742 - Syren Ship Model Company -1/2" scale

USS Constitution - Model Shipways - Scale 1:76

HMS Granado - CAF Model - 1:48

HMS Sphinx - Vanguard

Link to comment
Share on other sites

  • 2 weeks later...

Part 9

 

All the yard work is caught up for now, (until the next storm).  Time spent in the shop working on fairing the inside of the hull and adding the cap rails.

 

This shows the cap rails added and marked for trimming down to 5/16's wide.  The marks made with a compass are very hard to make out in this shot.

1385186952_20190619(Medium).thumb.JPG.a35843a004507098068b1d67d718b51d.JPG 

The rotary tool was used to rough out close to the line  then the sanding sticks brought the rest to the line.  the rotary is MicroLux #86698,  I really love this thing.  Variable speed and smooth as silk.  Not to mention it's small size.  The bearings in the one year old Dremel 4000 are noisy and it may not make much longer.

1646395480_20190619_1(Medium).thumb.JPG.7cf46812324a17f5f588aa888a3c2542.JPG

View overall of the completed cap rails and a coat of satin wipe on poly.

1679223546_20190619_2(Medium).thumb.JPG.54fcd47de8bfaff667b7aa9222d236b2.JPG

Here one can see the inner sheer plank added to the cap rails.  The next step is to paint the cap rails red.

1533161678_20190619_3(Medium).thumb.JPG.525ce6d90a81984e670fb6cee92c7afb.JPG

Port side.

1471569615_20190619_4(Medium).thumb.JPG.513e254c9007150e29659d830b0b3dac.JPG

3/4 Port side.

993822241_20190619_5(Medium).thumb.JPG.c38f1fa328db6b5785f94e8df3ddf4fd.JPG

Bow view.

334666359_20190619_6(Medium).thumb.JPG.1c0f747b4611cb4feed1e4463eec5ecc.JPG

Starboard stern.

823735015_20190619_7(Medium).thumb.JPG.4df9dae32643f359dbe31811b75b260a.JPG

Stern view.

753868743_20190619_8(Medium).thumb.JPG.31918a03d0d46ea415b438524a178819.JPG

More to come.

 

 

Bob W

 

 

 

Edited by oneslim

Bob Wescott

South Jersey

Link to comment
Share on other sites

Really nicely done.....very clean work and your care in craftsmanship really shows.   The joints are nice and tight .......excellent work.

Link to comment
Share on other sites

Thanks for all the Like's

 

Thanks Chis,  It's sort of like having a Chevy in the Sixties.  We called them 'Belly Buttons',  everybody has one.  Just because they are popular shows that what a well designed kit this is. You won't regret getting one.

 

 

Bob W 

Bob Wescott

South Jersey

Link to comment
Share on other sites

  • 4 weeks later...

Part 11

 

Well,  It's be a couple of weeks since the last post.  Been busy in the yard,  but still had some time in the shop.

 

First I finished the friezes on both Port and Starboard.

 

1824855197_20190712_1(2)(Medium).thumb.JPG.f9d0ccebafe9ed4239db7f231cbd9708.JPG

Mounting the Risers to the sides.

692001892_20190712(4)(Medium).thumb.JPG.0c37a9add84cb19c79af7160cc58fc53.JPG

While waiting for the Risers to dry I started on shaping the Windlass.  I made a small former from brass,  it wasn't very successful,  used a small square file to form the Bar holes.

1230020520_20190712(3)(Medium).thumb.JPG.884bd50eedcb32c0fc88db03f4c824db.JPG

 

1405733296_20190712_1(1)(Medium).thumb.JPG.6e9a10f93a255a3b23c6d0bac4668c5c.JPG

A "Veritas"  miniature chisel to cut in the flats.

468429052_20190712(2)(Medium).thumb.JPG.342c06ba6d73970903aa226749d1df51.JPG

I'm thinking of adding sails and wanted a strong mast.  So I made a Mast Step from Boxwood.

2041704650_20190712_1(Medium).thumb.JPG.43a5de55172de68f3a174f2921615675.JPG

Of course this meant that the thwart in line with mast had to be fitted.  Was very careful to align the mast fore and aft,  also from port and starboard.  There is a slight lean aft to the mast. 

1805354317_20190712(Medium).thumb.JPG.fcb5e77c38e8e87efd309c1e687233ab.JPG

Here she is overall.  Pardon the background,  Just some white paper taped to the basement stairs.

367698516_20190712_2(Medium).thumb.JPG.5ff558bb7b110d40976c813bb3f190ad.JPG

A little closer.

782380912_20190712_3(Medium).thumb.JPG.54aaecbf9954a772cc137ad37d6c05a2.JPG

Here is a shot of taking the mast down to octagon using the "Veritas" miniature Bench Plane.  It then was chucked in the lathe to round and taper.  The truck was mounted via a square hole.  This and the booms are going to be boxwood for strength.

402676840_20190712(1)(Medium).thumb.JPG.c337f5b1b19b86416a89cd19cafaeb5b.JPG

 

 

More to come.

 

Bob W

 

 

 

 

 

 

 

 

Edited by oneslim

Bob Wescott

South Jersey

Link to comment
Share on other sites

Bob,

 

One of these days you have to make the trek up to a meeting in Roseland.  I know its a haul for you, but I would love to see you and the model in person.

 

Chuck

Link to comment
Share on other sites

  • 4 weeks later...

Part 12

 

Here is a shot of the background I made from poster sheets from Walmart sprayed with a matte sky color made by Krylon.

33664514_20190808(Medium).thumb.JPG.937333570ce8098636dc2d57c7c859e0.JPG

I use self made sanding sticks of maple with sandpaper rubber cemented to them.  I've found they are prefect for removing the Laser char and I can clean them by dragging the stick on a micro fiber shop towel.  These are from Harbor Freight,  and sometimes You can get them for free with a regular purchase.

 

The first photo shows a sanding stick loaded with char.  The next one after two strokes across the micro fiber.

1054102882_20190808_1(Medium).thumb.JPG.ed9d1c3ed13f387d52385203bc8ec911.JPG

 

1290935241_20190808_2(Medium).thumb.JPG.d951368fe1673a3f9f10436c64e1ea77.JPG

The 'Hairy Hull'  with the 'nails' installed

859060133_20190808_3(Medium).thumb.JPG.51b89e2c9d31d8a3695020df0a4b57ed.JPG

Overall with floors installed and Platforms in place but not glued.

1849177320_20190808_4(Medium).thumb.JPG.09a8e723f685c1d79931d813e98bd0f9.JPG

Close shot of the Mast step and 'Limber' Boards.

1270858273_20190808_5(Medium).thumb.JPG.b3d1453932e7764375106eada9f8790d.JPG

 

More To Come,

 

Bob W

 

Bob Wescott

South Jersey

Link to comment
Share on other sites

Beautiful work. I’m at the point where I’ll be assembling the platforms and floor boards real soon. 

 

Did you pre- bend and assemble the 5 pieces of floor boards, and after they were done glue the finished floor in place?  

 

I think Chucks instructions suggests pre bending and and installing each piece of floor board one at a time. 

 

Any advantages/ disadvantages in either method?  

Rich

Member - Ship Model Society of New Jersey

Current Build:  Pride of Baltimore 2

Finished: Kate Cory

Finished for now (Not rigged):  Medway Longboat

 

Link to comment
Share on other sites

Chuck,  Yes I'm really enjoying the longboat.

 

Richvee,  I glued the top and bottoms together,  then soaked and bent them with the hot air gun.  Also had to sand the edges of the wide boards near the front and back.

 

Thanks for the LIKES

 

Bob W

Bob Wescott

South Jersey

Link to comment
Share on other sites

  • 1 month later...

Part 13

 

I made the tiller from boxwood,  turned on the lathe,  and then boiled it in the micro wave.  It was then placed in a jig over night to form.

 

1926144822_20190918(Medium).JPG.c0686193dec65f4aae679b10f1d0f6e2.JPG

I think it turned out well.

1286837989_20190918_2(Medium).JPG.e6bde0742cb183be88b84350091e7b8d.JPG

The rudder needs a couple more coats of wipe poly.

1566657717_20190918_1(Medium).JPG.fea97c3f89ded8def1d00670106bcaf0.JPG

Over head view.

943915443_20190918_3(Medium).JPG.cdc0ab453f8684302d6a5711d8cfc9c6.JPG

View of the belaying pins and windlass.

227201668_20190918_6(Medium).JPG.154eafccd7c45f8f4ac39724eb388027.JPG

Forward port quarter view.

378398691_20190918_5(Medium).JPG.c1f173ea56efc4e88564279d44e98a6e.JPG

 

Working on iron parts for the rigging now.  More to come.

 

BobW

 

 

 

 

 

 

Bob Wescott

South Jersey

Link to comment
Share on other sites

Link to comment
Share on other sites

I agree with Chuck, very nice work. Also that's a great way to make the tiller. Now hopefully I can remember it!

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

  • 3 months later...

Part 14

 

Wow,  I haven't posted since September 19, 2019.  I've had very little shop time.  My Daughter is being treated for a serious medical problem.  She is a divorced mother of two adult boys that are out on there own,  so It has fallen to me to be the care giver.  When she was 16 in 1988 she was diagnosed with stage four Hodgkin's disease.  She was cured with radiation treatments that lasted six months.  The treatment damaged the heart and lungs.  

 

She had open heart surgery to replace the Aortic Heart Valve with a metal mechanical device.  That was on Sept. 26, and was very successful.  The trouble started three days later when edema set in which caused her kidneys to become stressed.  This then led to full dialysis for more than a week.  The heart developed a heart block which required a Pacemaker to be implanted.  After 60 days in University of Pennsylvania Hospital she came home two days before Thanksgiving.  The following week she started to vomit blood and had to be rushed to the local Hospital for surgery to repair a bleeder in the stomach.  This was caused by a high level of Coumadin the in the blood,  this is the only drug that works with a metal replacement valve to keep it open.  Her level must be checked three times a week. 

 

Things are now back to almost normal, but it will be at least six more months.

 

 

On to the Longboat.

 

Here is some of the iron work in preparation of rigging.

2049215418_20200107(Medium).JPG.48b99bbf5b17a4a7dccb4447eeb1368a.JPG   

 

This is a small jig to shape the deadeyes.  The pins were inserted in the dowel to hold the deadeyes while turning to sand them.

96786067_20200107_1(Medium).JPG.44cfcdd6f25e9cd5a6ff7fec02e4035a.JPG

 

This just shows the size.  A 3/8" dowel and a 3/8" depression in a scrape of ply.

1379783199_20200107_2(Medium).JPG.d3d9718996fbf673b0158fc074973e7f.JPG

 

The pins hold the deadeye while it is turned on the plastic backed sanding film.

296925910_20200107_4(Medium).JPG.2783921d6f86b9b1b99d4711fc7bda52.JPG

 

Here are the before and after.

1976619503_20200107_6(Medium).JPG.27ca2add50856fee35666a59c08c17e0.JPG

 

This is a frame for stretching the silkspan for the main sail.  The inside opening is 15.5 X 15.5 inches.  The brown paper packing tape is applied to a wet sheet of silkspan to stretch the material.    

480277790_20200107_7(Medium).JPG.5b252ecce3dba64b41e3482472908365.JPG

 

Here the sail plan is taped to a cutting board,  then covered with wax paper.  Then the silkspan,  which has been coated with 10 washes,  is then mounted over the plan.  Next the seams are inked on with a drafting pen.  The ink is a thicker wash of the same acrylic paint used to coat the sail,  unbleached white and a small amount of neutral grey. 

2052279612_20200107_8(Medium).JPG.5d7205de3d2dc817fb2352f3b406905c.JPG

 

The seams have been added.  It was done with two passes because the drafting pen could not be opened to the correct width.  the first passes must be dry before adding the second pass. 

1760874918_20200107_9(Medium).JPG.73658b6e366c7bea901189dbb988bb7e.JPG

 

The doublings, edge seams, and the reef bands have been added with acrylic matt medium. 

614941648_20200107_10(Medium).JPG.94b5ac539541496ce77b86d3cbfb5a63.JPG

 

That it for now, hope to be back soon.

 

Bob W

Bob Wescott

South Jersey

Link to comment
Share on other sites

  • 5 weeks later...

BobG,

 

Thanks for the kind remarks.  Cape May is not so frigid this year,  no snow or cold snaps this year,  I live about 30 miles north west and go down a few times every year.

 

All the Best

 

BobW

Bob Wescott

South Jersey

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...