Jump to content
Ebomba

Suggestions on wood stock

Recommended Posts

Hi, I am new to model ship building, I recently retired, after being semi retired for 5 years (worked almost as many hours semi retired) but now I have time, I am working on the MS Rattlesnake, and have the MS Morgan on the shelf, I plan to modify or kit bash, also plan for the short term to paint. I can see that it will be necessary to have a supply of wood on hand, looking for suggestions on what thicknesses are the most common and also suggestions on quantities. I have a vintage Inca #159 model table saw, certainly not a Barnes, but it is fairly accurate. Thanks for suggestions and comments. This is a great site, I cannot believe the amount of information available.

 

Ed

 

Share this post


Link to post
Share on other sites

In the United States there are quite a few places you can get 20-24 inch pieces in 1/8, 1/4 and 1/2 thickness. The 1/8 is what I use for planking as it is between 3 and 4 mm. which fits my scale. The thicker pieces I use for things like cap rails. It depends on your scale. Larger pieces can also be ripped down to what you need. There are also a some places that sell wood strips in various thicknesses and widths although the variety of wood types is not as great as buying wood pieces and ripping them. As far as how much to have on hand, the ready availability allows one to just order what you need allowing for waste rather than stockpiling. Ships take months or years to complete so there is plenty of time to order new wood.

Share this post


Link to post
Share on other sites

Ed,

When you consider the planking thickness of the decks, the wales, the diminishing strakes, bottom planking, and rails (not to mention internal planking) there can be many different thicknesses.  No matter how accurate the saw, the best investment I made to be able to have proper thickness of planks is a thickness sander.  A good one such as the Byrnes will allow you to produce planks at a thickness within a few thousandths accuracy.  I don't know that there would be so many different thicknesses for either the Morgan or Rattlesnake, but if there are, a thickness sander is a good solution to getting what you need.

Allan

Share this post


Link to post
Share on other sites
Posted (edited)

Gidday Ed and a warm welcome from the Land Downunder.

All of the above comments are relative. If you are "Kit bashing" are you replacing the timber like for like? If so you already know what the dimensions are.

I hope I haven't confused the issue.

Wishing you all the best in your endeavours,

Mark.

Edited by pontiachedmark
Mend a typo.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...