Jump to content
Peta_V

Tender AVOS by Peta_V - Master Korabel - scale 1/72 (exclusive kit)

Recommended Posts

Thank you guys!! 

Some more additions. I have finished footropes for spreadsail yard. 

IMG_20191104_165805.thumb.jpg.73ecc196340f30460fb8c487a3bc86c5.jpgIMG_20191104_165841.thumb.jpg.c1646adf3fecba271f11b280e2d41d9d.jpg

And start to adding ropes to the mast. Already There are backstays, 4 pairs of shrouds and spreadsail jackstay. I have also added the iron belts with eyes for blocks. Ropes are served in areas where interfere with mast. 

IMG_20191104_165730.thumb.jpg.07fc6d8662dfdab6bb22a25f7861aca0.jpgIMG_20191104_165653.thumb.jpg.f60f140f23f9f42b09b09c063c2bd458.jpgIMG_20191104_165620.thumb.jpg.9b646870f5c83568e72f3745833e48b5.jpg

 

Share this post


Link to post
Share on other sites
On 6/10/2019 at 11:00 PM, Peta_V said:

Now it can be taken off the jig

IMG_20190610_214156.thumb.jpg.ae6c6eb8e844e5c9f90f0b70f947d240.jpg

Hi Peta,

Please can you or someone explain or preferably show how to remove this little boat from the jig.

Every build I have followed where one of these small Master Korabel boats are being built says exactly the same thing.

"Remove from jig", but nobody shows or explains how to do this.

I have built the MK0102 and almost destroyed my build trying to remove it from the jig.

I am about to build this one, and do not want to go through the same heart stopping procedure again.

Many thanks,

Tony

Share this post


Link to post
Share on other sites

@Galley Slave

As you can see the jig is covered with foil and hull is not glued to the jig. Only the tops of the frames are glued to the jig. Once the hull is planked the tops of the frames are cut (I used razor saw) and the hull can be removed. 

Screenshot_20191106_183804.thumb.jpg.2b12589984b668b7e1da28ccce700caf.jpg

 

Share this post


Link to post
Share on other sites

Thanks for that Peta.

Actually those instructions are pretty understandable.

Shouldn't be a problem.

😀

Edited by Galley Slave

Share this post


Link to post
Share on other sites

Gentleman, to the sewing machines! My premiere with the sails (luckily the sails are pre-sawn in the kit with the Bolt rope in place and they are very nice). I just wanted bolt rope to correspond with other running rigging so I cut the original off and replaced it with my own rope. I also did not like the eyes on the original. I think I made it more real, I hope. 

Reef points: first row in place (I still need tu cut it to the lenght and shape it) but I have to say that I found something to be as annoying as ratlines! 🧐

I guess the only way to get it done is sit down and work! 2 more rows are waiting. 

IMG_20191109_095913.thumb.jpg.71d8313f85279b5878ddfd2873119968.jpgIMG_20191109_095944.thumb.jpg.f923b307b824e79c16d1c4d13e686d6b.jpg

On the right is sail with kit bolt rope and eyes. 

IMG_20191109_100041.thumb.jpg.e009db0a9f2c21ca81c5009162fdccd8.jpg

Share this post


Link to post
Share on other sites

Cutting the reef points. This is a method I come up with. 

1.I copied the sail template several times

2. I cut the shape of the "reef line" out of the paper. 

3. I insert the template between sail and reef ropes so I can see the lenght and direction 

4. I fix the reef ropes straight in correct direction with the tape. 

5. Cover the ropes with diluted PVA glue and let it dry

6. Cut the ropes with exacto knife according to the template

 

It is little bit time consuming but accurate. Works quite well! 

IMG_20191115_100322_1.thumb.jpg.a98ccfc5e797d3e0549f04e778936afb.jpgIMG_20191115_102748.thumb.jpg.24a38028cfe51033c7ac89d44d92a19c.jpgIMG_20191115_150026.thumb.jpg.bb2d611778c1be7c019620ed7c922cc4.jpg

Share this post


Link to post
Share on other sites

Nice work! One sometimes sees models with reef points pointing every which-way; folks either forget or don't realize that lengths of rope have weight -- they will tend to hang vertically.

Share this post


Link to post
Share on other sites

All ropes for main sail are in place (what a mess) 

IMG_20191119_005849.thumb.jpg.5e23f66f1307655948f101feb755a776.jpgIMG_20191119_005938.thumb.jpg.0084a158afc836d198e2abb778ff1a4c.jpg

Now I could secure the mast in position and slowly start to solving that "hairy" puzzle. I must say it is a Joy to go through all the tackles! 

 

IMG_20191119_005129.thumb.jpg.0a84b7e906a861367a15892f1175ee50.jpgIMG_20191119_010122.thumb.jpg.dd0bb28b31078f8bdf704519d6e68972.jpgIMG_20191119_010258.thumb.jpg.187d58d1ae58b8aa6d1f63d8ec6f2a36.jpgIMG_20191119_010031.thumb.jpg.ab92b36acd96b810ae049b3de6a4895c.jpg

Share this post


Link to post
Share on other sites

Cleaning up continue........ 

Today I could put some serious time for the AVOS and I managed to finish:

Shrouds, jackstay and fore stay. As a next step I could tie everything up and clean the deck from the ends of ropes. (coils will be added later). I have also managed to take few pictures of details and whole model. 

IMG_20191124_002222.thumb.jpg.5a4bfd55312ec0153dfa2aba5536499a.jpg

IMG_20191124_002049.thumb.jpg.c86f2d5f62b33369e69a27e525fd783e.jpgIMG_20191124_001959.thumb.jpg.d9e26a42bcde077c9980c1e4edee52d1.jpgIMG_20191124_002144.thumb.jpg.1892ee5df78b82eb1d5b19e2e4796302.jpgIMG_20191124_001917.thumb.jpg.8188af561730d75bb1f66fbc2b8dd97b.jpgIMG_20191124_002021.thumb.jpg.c2413b3cd1b48a83c2667dd0f7bfa36e.jpgIMG_20191124_001439.thumb.jpg.8da508b27841a08e670e55ce0cd9f343.jpgIMG_20191124_001416.thumb.jpg.730eab2104d6717066888e1905adb40a.jpg

IMG_20191124_001524.jpg

IMG_20191124_001610.jpg

IMG_20191124_001641.jpg

IMG_20191124_001745.jpg

IMG_20191124_001832.jpg

Share this post


Link to post
Share on other sites

All the rigging of the main sail is in place so I could tighten it and clean the deck from the rope ends. 

IMG_20191127_225915.thumb.jpg.f2df34b113e528b6f91edb1fc582c1e0.jpg

And move to the next stage. I have attached all necessary ropes and blocks to the spreadsail yard 

IMG_20191127_225742.thumb.jpg.df80abdfe886253a027b28e1f2c209a3.jpg

And attached it to the jackstay 

IMG_20191127_225955.thumb.jpg.7ece523bbf82b96da9cbe46b0b69740b.jpg

It brings some volume to the ship! 

IMG_20191127_230519.thumb.jpg.8cc132ea485b37ddbfa8792feb29956e.jpgIMG_20191127_230119.thumb.jpg.a559bd400b61edd6927f72788740531c.jpgIMG_20191127_230206.thumb.jpg.4e2c804a673b94725ee4f79777304126.jpgIMG_20191127_230324.thumb.jpg.53b226695b271cd6b64c726007232e71.jpgIMG_20191127_230425.thumb.jpg.6d150b13e0fe5ff892addb9b5a08f095.jpg

But first I will have to do all the rigging around centerline (mast and stays) as all the yards rigging is making access very dificult. 

Share this post


Link to post
Share on other sites

Adding some more tackles, hooks and blocks. 

IMG_20191128_204042.thumb.jpg.09ec6b4984ecb6afb5cad5267758f606.jpg

And works on the sails. I have removed the boltrope and did some ironing. 

IMG_20191128_203841.thumb.jpg.29459e410a5a227884a1c6f5aaaa1944.jpg

Now its time to attach the boltrope back using my own rope. After 2 and half hour with a needel........ I have the smallest one ready 💣

IMG_20191129_084553.thumb.jpg.27640d834759cd6baf68b6afe12b0dec.jpg

Share this post


Link to post
Share on other sites

@Mirabell61thanks a lot Nils!

 

Although I have studied the rigging plans of this kit for a long time, it still suprises me how detailed it is! And in 1/72 scale! 

 

So fore sail is prepared, I have attached all the ropes and blocks...... 

IMG_20191129_175301.thumb.jpg.baa2bd2a5c3b3892e1bec25f794339cd.jpg

And start testing on the ship 

 

Foresail halyard

IMG_20191129_175325.thumb.jpg.da284f6733f2f2677c878f3b8400494f.jpgIMG_20191129_175614.thumb.jpg.a590b862b86a2b98b78a56a8631e01d6.jpg

Foresail sheet attached to the horse

IMG_20191129_174211.thumb.jpg.98e9f5fc66fdf3058b107a27495c930a.jpg

Foresail downhaul and tack 

IMG_20191129_175421.thumb.jpg.86697e3e0687577b0563cacc1058b358.jpg

There is really everything! 

IMG_20191129_174847.thumb.jpg.5b617d311621efe1eee7af3bc60ad020.jpgIMG_20191129_175656.thumb.jpg.be5f50c8db9a0c00a11662697d7dd3da.jpgIMG_20191129_175733.thumb.jpg.d84e728a6ab828d9c1a0c6d19d11f4b9.jpg

IMG_20191129_175536.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...