alpayed Posted March 12, 2022 Author Share #31 Posted March 12, 2022 5 hours ago, Hashir said: Thanks for the advice, Allan. Really helped me make my mind. While I was cutting strips for planking, I noticed that 3mm thickness wood strips were not easy to bend over the bulkheads. I wasn't interested in steam-bending them so that's why. I'll try to start a log and post pictures of how I'm progressing. A log would be nice. Usually dipping the plank in boiling water for a minute is sufficient to bend the them. The thicker plank allows you a bit more to sand off to finish the hull. Good luck I would like to see some pics as you progress. Allan. robert952 1 Models finished: Too many to list. Current build. Danmark (kit bash) Link to comment Share on other sites More sharing options...
robert952 Posted March 12, 2022 Share #32 Posted March 12, 2022 Great looking book. Thanks for putting it together. More thanks for sharing. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Robert Chenoweth Current Build: Maine Peapod; Midwest Models; 1/14 scale. In the research department: Nothing at this time. Completed models (Links to galleries): Monitor and Merrimack; Metal Earth; 1:370 and 1:390 respectively. (Link to Build Log.) Shrimp Boat; Lindbergh; 1/60 scale (as commission for my brother - a tribute to a friend of his) North Carolina Shad Boat; half hull lift; scratch built. Scale: (I forgot). Done at a class at the NC Maritime Museum. Dinghy; Midwest Models; 1/12 scale (Does LEGO Ship in a Bottle count?) Link to comment Share on other sites More sharing options...
smtm2013 Posted May 8, 2022 Share #33 Posted May 8, 2022 Thank you, I think this will come in very handy robert952 and alpayed 2 Link to comment Share on other sites More sharing options...
JerryC Posted January 27, 2023 Share #34 Posted January 27, 2023 I just ran across this topic, looking for a way to taper deck planks, and when I tried to look at the booklet, all I get is the first page. All subsequent pages are blank. I’m using an iPad with current software. robert952 1 Link to comment Share on other sites More sharing options...
alpayed Posted January 28, 2023 Author Share #35 Posted January 28, 2023 Hi Jerry. I just downloaded it again and no problems. I am not sure what the problem is. Maybe someone else has an answer. Regards Allan robert952 1 Models finished: Too many to list. Current build. Danmark (kit bash) Link to comment Share on other sites More sharing options...
Photog Posted April 23, 2023 Share #36 Posted April 23, 2023 Hi Allan, Lots for me to absorb and a big thank you for sharing your knowledge and book. A wee question if I may? how do you do those wonderful ropes? robert952 1 Link to comment Share on other sites More sharing options...
alpayed Posted April 24, 2023 Author Share #37 Posted April 24, 2023 Hi Photog. I use a rope walk which I made years ago. I like to use rayon to make ropes as it does not make ropes with fuzz on them. oakheart, robert952 and Photog 3 Models finished: Too many to list. Current build. Danmark (kit bash) Link to comment Share on other sites More sharing options...
Recommended Posts