Jump to content

Golden Hind by DanielD - OcCre - Scale 1:85 - First wooden ship build - Started 12/4/2019


Recommended Posts

Hello friends, this will be my first wooden model ship, the Golden Hind by OcCre in 1:85 Scale. I have no real experience with wood models; however, my first impression of this kit has been positive. The laser cut pieces have been easy to identify and cut out of the sheets. Shown below is a dry fit of the basic hull that I assembled last night. A little more fitting and some decking to make sure the rib alignment is correct, and i'll glue things in place.

 

Questions I have should anyone like to comment:

What is the best product to use to glue down deck planking? (I'm located in U.S.)

What is the best product to use to glue the ribs to the keel?

Any help is very much appreciated!

Box.jpg

Hull.jpg

Edited by DanielD
Spelling fix
Link to comment
Share on other sites

In this update, I finished fitting the bulkheads and dry fit the related decks to make sure the bulkheads fit and are square to the keel. Bulkheads are now glued in place and started sanding the ribs and support structures to form the shape of the bow.

 

I have a couple of questions as i'm getting ready to plank the decks. The plans call for using a pencil to darken the seams and draw plank ends every 60mm. I plan to use a pencil to color the edges of the planks before gluing to the sub-deck as many of you do, and I like the effect that leads to. I guess my question is should I make individual planks so that I can color the ends before gluing them down or is this too much of a hassle? If I make individual planks, what is the likelihood that a plank may come loose or one end curl up in the future or is this really not an issue? I want to be (reasonably) accurate, but is it worth the extra work, or should I stick with the plans, lay a continuous plank the entire length of the deck, then draw in the plank ends?

 

Another question about stains. The plans call for a water based walnut stain to be used on the deck and eventually the hull planking. I've not used stains in wood models before, does it react similar to staining molding for your house? Meaning, the longer you leave the stain on, the darker the wood? Can you even wipe off the stain or does it soak into the soft wood very fast? Is there a good technique to apply the stain? So many questions. I will browse around the other builders logs for ideas...

 

Any guidance appreciated. Thank you in advance.

20191205-c.jpg

20191205-e.jpg

20191205-a.jpg

Edited by DanielD
Spelling
Link to comment
Share on other sites

2 hours ago, DanielD said:

In this update, I finished fitting the bulkheads and dry fit the related decks to make sure the bulkheads fit and are square to the keel. Bulkheads are now glued in place and started sanding the ribs and support structures to form the shape of the bow.

 

I have a couple of questions as i'm getting ready to plank the decks. The plans call for using a pencil to darken the seams and draw plank ends every 60mm. I plan to use a pencil to color the edges of the planks before gluing to the sub-deck as many of you do, and I like the effect that leads to. I guess my question is should I make individual planks so that I can color the ends before gluing them down or is this too much of a hassle? If I make individual planks, what is the likelihood that a plank may come loose or one end curl up in the future or is this really not an issue? I want to be (reasonably) accurate, but is it worth the extra work, or should I stick with the plans, lay a continuous plank the entire length of the deck, then draw in the plank ends?

 

Another question about stains. The plans call for a water based walnut stain to be used on the deck and eventually the hull planking. I've not used stains in wood models before, does it react similar to staining molding for your house? Meaning, the longer you leave the stain on, the darker the wood? Can you even wipe off the stain or does it soak into the soft wood very fast? Is there a good technique to apply the stain? So many questions. I will browse around the other builders logs for ideas...

 

Any guidance appreciated. Thank you in advance.

20191205-c.jpg

20191205-e.jpg

20191205-a.jpg

Hi DanielD

when I did my decks I laid individual planks down and added some very fine black cotton that has been run through bees wax.

This gives a great appearance of caulking.

9F523E9C-A54B-4DAB-B2EC-7DE55DCD2CC2.jpeg

B226A473-BFF0-46CC-8DE4-C8CEC5843F86.jpeg

Current Projects: Souvereign of the Seas by De Agostini

                            Sciabecco. By Amati

Finished projects: Port Jackson by Modellers Shipyard

                             Botter boat by Amati

                             King of the Mississippi by Artensia Latina

                             Endeavor by Artensia Latina

Link to comment
Share on other sites

I decided to make individual deck planks using small holes from a template to simulate the nails. The kit came with period color paints which I thinned down to a stain. So far I’m happy with the results.

124DA5E3-CF77-4AA6-8D77-EE0506DDED0D.jpeg

99C719A9-BFEC-4987-A1CF-14A9E37EDE1F.jpeg

Link to comment
Share on other sites

It’s taken a few days, but I have completed the decks. I made individual planks, definitely hard, but I think worth the effort.

BB9A150D-7AB3-458A-84E8-270A56492CFC.jpeg

1CF00483-4662-44AC-BC8D-057C78E457A5.jpeg

Link to comment
Share on other sites

Nice deck planking.

You have one more follower.

You can always add extra "nails"
If you do this with a pencil then this is not much extra work

1CF00483-4662-44AC-BC8D-057C78E457A5.jpeg.23819caa5e0464a3e5ec870c37b24c6d.jpeg.949148671ed8b009512b8c87b97b7ad9.jpeg

Greetings,

Patrick

 

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

This is my first attempt at hull planking. So far I’m pleased with the outcome. This of course is the first layer with a thin final veneer planking yet to go.

4DA5DE2E-4764-43F1-B8C8-4EE4D4615456.jpeg

E6D11FE0-041D-4AB4-995B-99D43823227A.jpeg

4EB5CA82-3691-44EA-A752-2DF831141EF3.jpeg

D21339A9-EB06-4C1E-A606-65B5ADEA6506.jpeg

947ED095-A9C3-4F0D-905D-86FDD58A4F04.jpeg

Link to comment
Share on other sites

More first layer hull planking finished, both sides from gun ports up.

 

I have a couple of questions: 1) how smooth do I need to sand this first layer of planking? I know I still have sanding to do, but is the goal to get rid of the lines between the planks, i.e. make very smooth? Or are plank lines okay to leave in? 2) Should I fill the gaps between the planks with wood filler? How big of a gap is okay to leave, i.e. the barely visible gap between tightly fitting planks? Or a gap of a 1/32 or more? If so, what is a good brand of wood filler for models?

 

Sorry for all the questions, just things i'm thinking about but have not been able to find similar questions from other members.

 

Thanks in advance for any replies, Daniel

20191218-a.jpg

20191218-b.jpg

20191218-c.jpg

Link to comment
Share on other sites

The fewer errors remain in your first layer.
The easier it will be to apply your 2nd layer.


It seems like a lot of unnecessary work now, but I don't think you will regret having done it

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Greetings. Nice building.:)

The smooth surface of the first layer is ideal. Any inequality is then visible.

Avoid beginner mistakes, the second layer must already run with the railing lines.

 

73827802_GoldenHindDaniel.thumb.jpg.f51cbe4006532bbe48d609574b573e57.jpgGood luck to the construction !! 🛠️O.

 

Ondras.

Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230
Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576

 

Member of the organizing clubhttps://wchs-c-2023.klom-admiral.cz/en

Link to comment
Share on other sites

It’s taken the better part of a week, but the first layer of planking is finished. A litter more sanding, then on to the next step.

94E9BA51-6F9A-4011-85D5-AD3349C6D342.jpeg

Link to comment
Share on other sites

More work on the final layer of planking. One thing for sure, planking is a long tedious process.

24BF55D5-432D-40BA-8CDE-C2CCE5DBEF52.jpeg

Edited by DanielD
Spelling
Link to comment
Share on other sites

The final layer of planking continues...sadly I’m having trouble planking the bottom half of the hull.

6A673AE3-ED72-482B-BE6F-D035D193B7F3.jpeg

DEF1303D-2EC6-42B4-A418-2933643EAB20.jpeg

74311FDB-7C87-4FC8-9007-FDE0574ED77D.jpeg

8C97B7E9-A9BA-4E36-A358-6C5FCB2D1BCB.jpeg

Link to comment
Share on other sites

I tried to give you a guide to this shape of planks..

508775798_GHOccreDaniel.jpeg.8e9cd23e615bdc4090cb2ff5f063ccf8.jpeg

1029059417_golden-hind-stavebnice-modelu-lodi-occre(1).thumb.jpg.8fdfb6f6febafb71fe61ec7fa958068c.jpg

625892467_bokVasy.jpg.7fa83fed7bce976aea227f3ceb42eaaa.jpg

It would also help in lining the bow and stern. I wish a quiet building. O.

Ondras.

Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230
Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576

 

Member of the organizing clubhttps://wchs-c-2023.klom-admiral.cz/en

Link to comment
Share on other sites

Thanks Ondras71, I have been reading several items on the planking, one thing consistent has been that the plank should lay in its natural course which is what I have attempted to do. I initially tried to follow the line you suggested, but I had to bend the plank which caused a pucker in the boards. To avoid the "pucker" I just glued the planks down flat in their natural course. I'll keep working on it. I'ts my first wood model and i'm happy with how it has turned out so far. I'm sure as I do several of these over the years, i'll get better.

Link to comment
Share on other sites

Bending boards in several directions awaits you now. You could have started earlier. Learning is important. ✔️O.

Ondras.

Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230
Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576

 

Member of the organizing clubhttps://wchs-c-2023.klom-admiral.cz/en

Link to comment
Share on other sites

New Year’s Day planking...I have som more sanding to do, but I’ll finish up a few things first. For my first wood ship, I’m happy with how it’s going.

D4DABB08-B704-4A74-B8FB-F8C504FC3875.jpeg

Link to comment
Share on other sites

Your first planking.


Congrats and well done 👍

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

going to be a smart model the way its going--well-done :)

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

Now that I more or less have the planking finished, I am looking on to the next few steps to have it in my mind what I will be working on. I think I have run into my first issue with this kit. It seems that the rudder does not fit while all the other parts so far have been right on. Also, and I'm sorry I don't know the correct terminology for this part, but a loop shaped piece of wood that goes around the rudder and should go through the hole in the stern of the ship which would when moved, would control the rudder. Anyway, placing the loop over the rudder as far down as it will go, and it is no where close to the hole that was prefabbed into the stern bulkhead. This is my first wood model kit...does this kind of think happen often?

IMG_1534.jpg

IMG_1536.jpg

IMG_1535.jpg

Link to comment
Share on other sites

Most wood kits require some adjustments to get the parts to fit right.

 

I would recommend checking against the plans to see how it’s supposed to go together and adjust accordingly.

Building: 1:64 HMS Revenge (Victory Models plans)

1:64 Cat Esther (17th Century Dutch Merchant Ships)
 

On the building slip: 1:72 French Ironclad Magenta (original shipyard plans)

 

On hold: 1:98 Mantua HMS Victory (kit bash), 1:96 Shipyard HMS Mercury

 

Favorite finished builds:  1:60 Sampang Good Fortune (Amati plans), 1:200 Orel Ironclad Solferino, 1:72 Schooner Hannah (Hahn plans), 1:72 Privateer Prince de Neufchatel (Chapelle plans), Model Shipways Sultana, Heller La Reale, Encore USS Olympia

 

Goal: Become better than I was yesterday

 

"The hardest part is deciding to try." - me

Link to comment
Share on other sites

Hey everyone, quick question. During the process of planking my ship, I have a couple of SMALL areas that I would like to fill. I don't plan on painting my hull, leaving it the nice rich color of the planking, but will be applying a satin varnish to protect the wood. First, is it even worth trying to fill the gaps, one is maybe 1/32" wide about 2" long and the other is maybe 1/16" by 1/8" "hole." If I should fill the gaps, what is the best way to achieve the color of the planking? I have read some threads that suggest making some fine sawdust from the scrap planking and mixing it with white/clear glue while others use commercial filler. I'm just not sure it's worth it as I could mess up what I have...

 

If I use the glue method, how does one make this glue mixture to fill the gap? One thread I read was to put glue in the gap then lightly sand over area, the glue will attract the sawdust particles. My problem with this is that my gaps are so small, how do i get the glue in the gap without messing up the planking nearby?

 

So much to learn....

Link to comment
Share on other sites

1 hour ago, DanielD said:

It seems that the rudder does not fit

Plan A

IMG_1534.thumb.jpg.a47afbcf0f360fa929bcc026a4dfeeb7.jpg.85a6c9798ac7e3b38468900dbc1dd6eb.jpg

Cut or saw away a part of your rudder. You will always see that this was "recovery work"

 

Plan B
Make a new rudder that fits.
And make sure the grain of the wood points in the longitudinal direction. Not in the cross direction.

 

I would go for plan B.

 

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Thanks Patrick, I'll see if I can scrounge up some wood and make a new rudder to fit. Good catch on the grain of the wood being the wrong direction...

Link to comment
Share on other sites

Starting the railing project. This is harder then I thought it would be, such tiny pieces.

 

Time to make a jig to make the railing pieces more consistent in size...

A617B245-9AA9-41E7-9499-B672F3609F54.jpeg

Edited by DanielD
Added another thought
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...