Jump to content
DocBlake

Hannah by DocBlake - 1:32 Scale - Scratch Built, Plank-on-Frame, Admiralty Style

Recommended Posts

This will be my build log for a scratch-built, 1:32 scale,  plank-on-frame,  admiralty style model of "Hannah", purportedly the first armed ship recruited into Washington's navy during the Revolutionary War.
I've wanted to do a full hull scratch build at this larger scale, but what ship?  The choice was not completely arbitrary. Even a 5th or 6th rate frigate in the Royal Navy would be 4-1/2  feet long at this scale, not including the bowsprit!  Obviously I had to look elsewhere.  I settled on Hannah because it is significantly smaller (this model will be 24" long with a 6" beam) and there was a lot of documentation out there regarding the model.  I have Hahn's book as well as his plans for "Hannah" to use as a reference. The actual building plans were drawn by Bob Hunt, based on Hahn's original drawings, and were done in 1:48 scale. I had them resized to 1:32.   The drawings show each individual futtock and include detailed drawings of each frame, including bevel lines.  The model will be built in an upright jig, as was my 1;32 Armed Virginia Sloop and my 1:32 "Blandford" cross section.  The frames, stem, keel and stern will be boxwood.  I'll decide on other woods as I move along with the build.


Thanks for looking in!  Here are some shots of the plans and Bob Hunt's "Hannah" model along with a link to his website.         https://www.lauckstreetshipyard.com/       
 

 

 

 

IMG_1800.JPG

IMG_2466.JPG

plans1.jpg

plans2.jpg

plans3.jpg

Share this post


Link to post
Share on other sites

Thanks for looking in, guys!

 

I started working on the model by milling my wood.  The frames are double frames, sistered together.  each half-thickness frame is 9/64" thick, with a finished frame thickness of 9/32".   almost all the billets are 9/64" thick.  The stem and keel are supposed to be constructed of two thicknesses also, but I simply made them 9/32".  The photos show some of the milled wood, my keel blank with the false keel attached , the stem and the template for the keel scarf rubber cemented to the keel blank.
 

han-boxwood.jpg

han-keelblank.jpg

han-keelscarf.jpg

han-stem.jpg

Share this post


Link to post
Share on other sites

I question making the stem out of a single timber.  Both Harold Hahn and Bob Hunt left the stem as a single timber.  It's a large piece of wood with a pretty serious curve in it.  I doubt that a large enough tree could be found with the natural curve in it to serve as the stem.  If the stem were cut from a single straight timber , that piece of wood would have to be almost 6 feet wide!  I doubt there were many trees that were more than 6 feet in diameter while being suitable for shipbuilding!   My conclusion is that the stem would almost certainly be scarfed together.  Here is a proposed scarf for the stem.  I have no real plans that show this...it just makes sense to me.  Thoughts?

stemscarf.jpg

Edited by DocBlake

Share this post


Link to post
Share on other sites

Getting ready to make a little more sawdust.  Templates for various parts rubber cemented to their boxwood blanks.  Shown are the rudder, wing transom, 2 part rising wood, 4 part keelson, stem and stern deadwood and the sternpost.  I'm trying to align edges where straightness is critical to the straight edge of the blanks.

keelpieces.jpg

Edited by DocBlake

Share this post


Link to post
Share on other sites

These plans were originally drawn in 1:48 scale, and we enlarged them to 1:32.  The result was some thickening of the part outlines, and the problem will be "tolerance creep" unless I'm very careful.  I've already had to remake the stern post!  Oh well, these are the challenges of scratch building.

Share this post


Link to post
Share on other sites

Great start!

 

Hahn simplifies a lot of details in his drawings, you will find plenty of "giant pieces" that were built out of multiple pieces in reality. Just use more detailed sources if you want to build it in a more realistic way. For example, the stem is likely made out of more pieces, etc etc. They are quite visible on a model, and actually look way nicer in a detailed form, to my taste...

 

On my model, Hahn version looks like this:

IMG_0895.thumb.jpg.b0370cc5e682f19fba048c84623d3ebd.jpg

Looks too crude, so I scrapped it and re-made in a bit more detailed way, based on other drawings and books. Note that this is not a full level of details, for example that triangle in the middle should have been broken down as well, etc etc. But still looks a bit better.

IMG_2277.thumb.jpg.ee2d4246540dbae690f588c58347c2f4.jpg

Edited by Mike Y

Share this post


Link to post
Share on other sites

Lots going on, so I'm not posting as often.  I started building the frames.  They are "sistered" and made of boxwood.  The little tabs on the floors of the frames help to strengthen the frame and prevent breakage while handling, finishing and installing them.  They are trimmed off after all the frames are installed so the frames flow smoothly into the rabbet,  This is a Bob Hunt idea, and it works very well.  The frames have not yet been sanded, bevel or finished in any way.  Just glued together after cutting from their billets.

frames1.jpg

frames2.jpg

Share this post


Link to post
Share on other sites

Finally completed all the frames. They are not sanded, beveled nor treenailed. There are over 300 parts making up the futtocks of the frames: 23 full frames, and 11 pair of half-frames and cant frames. All of boxwood. I wore out a dozen scroll saw blades cutting through that stuff. Fortunately the blades are cheap: about $0.50 a piece. The last photo shows a closeup of one of the full frames. I didn't use the Hahn method of cutting them out. All frames were constructed using individual futtocks assembled over a drawing of the frames. It IS possible to get tight joints between the individual timbers using that method.

futt1.jpg

futt2.jpg

futt3.jpg

Share this post


Link to post
Share on other sites

Hey Dave,  Just discovered this log so I’ll be following along.  I also have a thing for colonial ships.

Your work looks excellent.  I don't think I could ever do a plank-on-frame, but yours looks outstanding.

So, keep up the outstanding work.

Cheers.

Share this post


Link to post
Share on other sites

Thanks, guys!

 

Rather that hand cut the building jig, My good friend Mike agreed to laser cut it for me out of some very nice 3/8" Baltic Birch plywood. The base of the jig has a pair of "clamps" that hold the keel straight. The stem and the sternpost fit into notches in the top , as do the arms of the frames. The principle is the same as my Blandford build jig. Thanks, Mike!!

Jig1.jpg

Share this post


Link to post
Share on other sites

I finished the building jig. The last photo shows the keel blank with the scarf cut into the forward end held in place by the wooden "clamps". Once the keel is placed in the jig, I'll hold it down to the base by drilling some holes on either side of the keel at a couple of locations and fixing it in place with a couple of nylon cable ties.

jig2.jpg

jig7.jpg

jig8.jpg

jig9.jpg

Share this post


Link to post
Share on other sites

Dave, I’ll pull up a chair and follow along. Very nice work so far. I’m interested in a future scratch POF and this may fit the bill. Have you bought many of Bob Hunt’s books? They are very expensive for the lot. 
 

Dave B

Share this post


Link to post
Share on other sites

Hi Dave!  I haven't purchased any of his books, but I did buy his College of Model ship Building CD's a a special discounted price a number of years ago. Lots of good info there.

 

I began work on assembling the keel. The most important part is getting the stem glued to the keel, and setting the sternpost and the deadwood. I fiddled with the sternpost angle for about an hour before I was satisfied. The first photo shows the relationship between the keel blank, the stern post and the stern deadwood.

Before I do any gluing, I need to decide what to do with the deadwood. Both Bob Hunt's plans and Hahn's plans call for this to be one single piece. Given the size and shape I'm sure in real life it was made up of component parts. Any thoughts on a design? I enclosed a photo of the part outline as well as what the deadwood looks like with the stern half frames in place.
 

image0.jpg

Image1.jpg

Image2.jpg

Edited by DocBlake

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...