Jump to content

US Brig Syren by WalrusGuy - FINISHED - Model Shipways - Scale 1:64 - Second wooden ship build


Recommended Posts

It looks very good standing with the rigging. Your speed is amazing.

Stay Well and Stay Safe

Will :pirate41:

Current Build:

Erycina 1882 Fishing Trawler by Vanguard Models 1:64 scale

Syren by pearwill Model Shipways 1:64 scale

On Hold:

HM Cutter Cheerful  Syren Shipmodel Scratch 1:48 scale

1776 Washington Row Galley scratch scratch from NRG plans #121  1:48 scale

Completed Build:

Charles W. Morgan by Artesania Latina circa 1988, Lowell Grand Banks Dory 1:24 scale by Model Shipways, Norwegian.Sailing Pram 1:12 scale by Model Shipways, Muscongus Bay Lobster Smack 1:24 scale by Model Shipways

 

Member Nautical Research Guild

 

Link to comment
Share on other sites

Thanks so much Thomas and Will!! I agree, I can't believe how much of a difference the standing rigging makes to the looks of the ship. I can't wait to see how the ship will look once the yards are all made and rigged!

 

Standing rigging is finally finished! Here are some pics to mark the completion of this chapter:

20210330_121841.thumb.jpg.2db8088fb3d24784b6db1d7395f7a928.jpg

20210330_121935.thumb.jpg.9a15418ae3976e26b2c0007cc944f334.jpg

image.thumb.png.20d68965019198ab3261fdd1aebfb4cb.png

20210330_123508.thumb.jpg.a509e3a09e5d3c957a4e8e4456fc199d.jpg

20210330_121811.thumb.jpg.4b6cc71fe2e3412d98f35ff5d1cc308f.jpg

20210330_121213.thumb.jpg.126f8b61e46512b32f1555087ab13b8e.jpg

20210330_121619.thumb.jpg.1e89b7739824e49067b078ba25c2a844.jpg

20210330_121703_1.thumb.jpg.cfd8c7f255784257a2dbf3c48f838cef.jpg

677874353_20210330_121826(1).thumb.jpg.5119f2622b722277fe1bee9292dd728a.jpg

20210330_120511.thumb.jpg.de2d4f95d110a7786bf8517a1462ada1.jpg

20210330_121434.thumb.jpg.2edf26ca964966eda0337e025209a45f.jpg

20210330_120404.thumb.jpg.92ef452739ec483443fc26f96e7b216f.jpg

20210330_122016.thumb.jpg.ed390a6ec91edf902a491db29ce03a5a.jpg

20210330_120943.thumb.jpg.bc9216007facdb6a14c12a115194fe2a.jpg

image.thumb.png.6c4fce6e67be5fc3434f708943090310.png

20210330_121650.thumb.jpg.e49a1d992731d25b111412826d092b37.jpg

And some pics of the rope coils (these were harder/trickier to make than the ones on cleats, at least for me...). I again followed Ed Tosti's method to make these from his Young America build.

20210330_122203.thumb.jpg.aa74811b8c22a5a869c25e4a4f1e681b.jpg

20210330_121639.thumb.jpg.1926373fce93467ea25fde6d3e5e8c5b.jpg

20210330_121011.thumb.jpg.89b9a94bc97fe245b1090ff0ee92ab8a.jpg

image.thumb.png.bb1549b6a61fa0e4990053f8e6667da6.png

Edited by WalrusGuy

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

1 hour ago, Retired guy said:

Hi Wally just spent an hour catching up on your brilliant build,  you are doing a fantastic job on her well done mate.

 

Regards

Richard  

Thanks for checking in Richard, and glad to have you back! Looking forward to seeing your beautiful Bluenose build take shape will all the detail work 🙂 (got to admit, I find myself browsing through your log every now and then admiring the craftsmanship and metal work) 

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

2 hours ago, TimC said:

Wonderful job so far. I’ve referenced your work frequently!  What did you use for your netting? I’m struggling to find anything that meets scale and looks decent 

 

Tim

Thanks Tim! I'm using the net provided by the kit. Maybe check with Model Expo to see if they sell these separately. The part number for netting is WP2828. 

Edited by WalrusGuy

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

4 hours ago, WalrusGuy said:

Thanks Tim! I'm using the net provided by the kit. Maybe check with Model Expo to see if they sell these separately. The part number for netting is WP2828. 

Thank you!  I’ll check it out 

 

tim

Current Build: Amati HMS Fly, First Time Builder, 2020

Link to comment
Share on other sites

Wonderful! This brig is absolutely gorgeous. A real pleasure to admire all the perfectly executed details.

Jean-Paul

 

'You are not carving a bear with a chain saw here folks',

Chuck Passaro, ´Queen Anne Style Barge´ manual of instructions

 

Current builds :

 

Finished build :

 

Next on list :

  • Santa Maria boat - Korabel (Ukraine) - 1:24
Link to comment
Share on other sites

Just checking in your build. I love to go back and admire the photos of your work.

 

Stay Well and Stay Safe

Will :pirate41:

Current Build:

Erycina 1882 Fishing Trawler by Vanguard Models 1:64 scale

Syren by pearwill Model Shipways 1:64 scale

On Hold:

HM Cutter Cheerful  Syren Shipmodel Scratch 1:48 scale

1776 Washington Row Galley scratch scratch from NRG plans #121  1:48 scale

Completed Build:

Charles W. Morgan by Artesania Latina circa 1988, Lowell Grand Banks Dory 1:24 scale by Model Shipways, Norwegian.Sailing Pram 1:12 scale by Model Shipways, Muscongus Bay Lobster Smack 1:24 scale by Model Shipways

 

Member Nautical Research Guild

 

Link to comment
Share on other sites

On 3/31/2021 at 4:50 AM, egkb said:

Magnificent .. Just Magnificent !!

 

Eamonn

 

On 3/31/2021 at 8:58 AM, JpR62 said:

Wonderful! This brig is absolutely gorgeous. A real pleasure to admire all the perfectly executed details.

 

On 4/1/2021 at 4:30 PM, niwotwill said:

Just checking in your build. I love to go back and admire the photos of your work.

 

Stay Well and Stay Safe

Will :pirate41:

Thank you so much for the nice comments, Eamonn, Jean-Paul, and Will. It's very much appreciated!!

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Just a quick update, I finished up shaping up and painting the yards, boom, and gaff. I used tung oil for the stunsl' booms. I bought the mini chisels from Lee Valley, and they helped to speed up the tapering process! It was also a lot of fun using them 😃

 

Here are some pics:

20210401_200712.thumb.jpg.086921d9a844d9309e3a30d68c088859.jpg

20210404_175259.thumb.jpg.d980aeac3b178178876a17583d2bd296.jpg

20210404_211315.thumb.jpg.ed0ee20613a7c2ad1429636601f0e510.jpg

Still deciding what to do next. Might go ahead and finish up detailing all the yards, gaff, and boom before I start rigging them.

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Gotta watch out for places like Lee Valley they have so much stuff that I need/want, but a good set of chisels are a great investment. Its even fun to sharpen them between usages. Oh the yard and gaff look great also.

 

Stay Well and Stay Safe

Will :pirate41:

Current Build:

Erycina 1882 Fishing Trawler by Vanguard Models 1:64 scale

Syren by pearwill Model Shipways 1:64 scale

On Hold:

HM Cutter Cheerful  Syren Shipmodel Scratch 1:48 scale

1776 Washington Row Galley scratch scratch from NRG plans #121  1:48 scale

Completed Build:

Charles W. Morgan by Artesania Latina circa 1988, Lowell Grand Banks Dory 1:24 scale by Model Shipways, Norwegian.Sailing Pram 1:12 scale by Model Shipways, Muscongus Bay Lobster Smack 1:24 scale by Model Shipways

 

Member Nautical Research Guild

 

Link to comment
Share on other sites

51 minutes ago, niwotwill said:

Gotta watch out for places like Lee Valley they have so much stuff that I need/want, but a good set of chisels are a great investment. Its even fun to sharpen them between usages. Oh the yard and gaff look great also.

 

Stay Well and Stay Safe

Will :pirate41:

For sure! I had to control myself 😄. I just got some of their miniature tools (chisel, spokeshave, and honing guide). Next on the list is their block plane. Too many options!!

 

Here are the chisels I got

20210404_231122.thumb.jpg.538da5cb2f18830544f1800ca6199742.jpg

They are really a pleasure to work with. I haven't tried sharpening them yet. I bought some small diamond credit card sized whetstones of different grits for that (hoping those will be good). Have never sharpened tools before, so once they get a bit blunt I'll try it out.

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

11 hours ago, KHauptfuehrer said:

The best models are the ones that look pristine and clean no matter how close the camera gets.  Yours is one of those. Congrats!

Thanks so much Kurt! 🙂 

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

I finished installing all the iron bands on them. From Lee's book, I read that if a spar had battens, iron bands were also used to hold them in place. So I deviated a bit from the instructions to include this small detail. Here are some pics of where they are at

20210406_165651.thumb.jpg.37be6d47b5070c672ffb5c512b9d0693.jpg

20210406_165623.thumb.jpg.713772115853ae4ea60707a043301a52.jpg

20210406_165454.thumb.jpg.4bdcac524c419d5af0a67735af4e6b9b.jpg

20210406_165432.thumb.jpg.d6f505ea8a3fa231d2882fd6c8b78860.jpg

20210406_165415.thumb.jpg.631358026a642b0a9d0860868b2d376e.jpg

20210406_165404.thumb.jpg.2fe6043214cde5e427f3a97b4ad072a5.jpg

20210406_165419.thumb.jpg.89fcf99f3fd28d74897d42c37d81e140.jpg

Still lots of work needed on the spars (installing blocks, footropes, stuns'l boom irons etc etc)

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

The iron bands make the spars. The small deviation adds the detail making them visually stunning. Great work what did you use for the bands?

 

Stay Well and Stay Safe

Will :pirate41:

Current Build:

Erycina 1882 Fishing Trawler by Vanguard Models 1:64 scale

Syren by pearwill Model Shipways 1:64 scale

On Hold:

HM Cutter Cheerful  Syren Shipmodel Scratch 1:48 scale

1776 Washington Row Galley scratch scratch from NRG plans #121  1:48 scale

Completed Build:

Charles W. Morgan by Artesania Latina circa 1988, Lowell Grand Banks Dory 1:24 scale by Model Shipways, Norwegian.Sailing Pram 1:12 scale by Model Shipways, Muscongus Bay Lobster Smack 1:24 scale by Model Shipways

 

Member Nautical Research Guild

 

Link to comment
Share on other sites

I haven't checked in for a while, and I'm always stunned at your rapid progress, and how clean and crisp it looks in closeups.  Amazing craftsmanship!   This will be a stunning model when finished.  You'll be amazed at what a difference it makes when you start adding each yard and rigging.  

 

Glad you caught the extra block on the crosstrees (I think that's where it was).  I didn't notice it, and adding it after you have a lot of rigging on was a bit difficult.  Much easier to get all the blocks and details on beforehand.

 

I agree with comments about iron bands around the spars.  A very nice detail to add, and kind of surprised it wasn't mentioned in the kit as an optional detail.  Chuck added so many small details like this, it really makes the kit.  And you have to draw the line somewhere.

 

Yours always looks better than mine in the photos.  I had a hard time with the netting on the bow.  It was hard to trim to the right shape because it wanted to deform, and when I started tying it, it didn't want to stay flat.  I managed, but yours looks a lot better.  Perhaps eyes and fingers about 50 years younger than mine make a difference?   Ha, ha!   It's just patience and your knack for getting details right.  I'll be patient for a while, and then get going too fast and make little mistakes. 

 

Display case is coming along slowly.  I've been sanding & spraying on coats of lacquer on the parts.  I'll assemble after I get the parts finished except for a final coat.   

David Salguero

Wichita, Kansas

 

Current Build:  Royal Yacht, Duchess of Kingston - Vanguard Models

Completed:  US Syren - Model Shipways

On Deck:  HM Cheerful - Syren Ship Models

Link to comment
Share on other sites

On 4/7/2021 at 9:39 AM, niwotwill said:

The iron bands make the spars. The small deviation adds the detail making them visually stunning. Great work what did you use for the bands?

 

Stay Well and Stay Safe

Will :pirate41:

 

22 hours ago, captain_hook said:

Very nice! You‘re approaching the finish line. Keep up the good work!

 

18 hours ago, abelson said:

I like the bands on the spars - a nice addition. I think I'll copy you when I reach that stage. Looking good. You better slow down or you'll be starting your next build soon. haha.

 

13 hours ago, desalgu said:

I haven't checked in for a while, and I'm always stunned at your rapid progress, and how clean and crisp it looks in closeups.  Amazing craftsmanship!   This will be a stunning model when finished.  You'll be amazed at what a difference it makes when you start adding each yard and rigging.  

 

Glad you caught the extra block on the crosstrees (I think that's where it was).  I didn't notice it, and adding it after you have a lot of rigging on was a bit difficult.  Much easier to get all the blocks and details on beforehand.

 

I agree with comments about iron bands around the spars.  A very nice detail to add, and kind of surprised it wasn't mentioned in the kit as an optional detail.  Chuck added so many small details like this, it really makes the kit.  And you have to draw the line somewhere.

 

Yours always looks better than mine in the photos.  I had a hard time with the netting on the bow.  It was hard to trim to the right shape because it wanted to deform, and when I started tying it, it didn't want to stay flat.  I managed, but yours looks a lot better.  Perhaps eyes and fingers about 50 years younger than mine make a difference?   Ha, ha!   It's just patience and your knack for getting details right.  I'll be patient for a while, and then get going too fast and make little mistakes. 

 

Display case is coming along slowly.  I've been sanding & spraying on coats of lacquer on the parts.  I'll assemble after I get the parts finished except for a final coat.   

Thanks so much for the motivating comments! 🙂 I was also surprised on how the spars looked with the bands. The end seems near, yet so far away. I am really excited to see how she'll look with all the spars. I took a bit of a break from the spars and started to work on rigging the boom and gaff. I will post photos in the next couple of days once I finish. The running rigging is even more fun than the standing rigging 😄! I am just having a bit of trouble with is belaying the lines in the cramped spots with all the ropes on the way. After doing a couple I think I am getting used to it.

 

Will, I used a black tape for the bands. I first stuck it on a flat piece of wood, then used a ruler as a guide to cut the small strips. Since the tape's adhesive is very weak, I put superglue on the ends to prevent it from peeling off. Here is the photo of the tape. Unfortunately there is no branding on it, so I am not sure what is actually called. Also, since the edges are a bit whitish, I painted it over again with black paint.

 

David, I also had a bit of trouble with the net. I ended up using a bit of an oversized piece of net, then seized the corners. After I seized all the links in the middle. Then I trimmed off the excess pieces with a small pair of scissors. I just took a look at your display case. The wood after staining is gorgeous! Can't wait to see it all come together.

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Finished up rigging the boom and gaff, and added the rope coils. I am thinking I'll add rope coils after each section of the rigging. Otherwise there will be too many to handle all at once!

20210409_091324.thumb.jpg.d74809af48942a1d01fbc40723a849dd.jpg

20210409_090058.thumb.jpg.5b2264d3b8da658f1117cb0ed48a91aa.jpg

20210409_085855.thumb.jpg.1684776eddb27accc9d9ab03f4e372f7.jpg

20210409_091431.thumb.jpg.2590fa2969d5dff3fde5874bf530918b.jpg

20210409_090138.thumb.jpg.0b5faa35bdbabe5ccf5dcf10daee29e7.jpg

20210409_091002.thumb.jpg.9ccfc04461137297f6e94e7c0452e3e1.jpg

20210409_091842.thumb.jpg.dec155ffca28ed9eafe262bedc444776.jpg

20210409_090116.thumb.jpg.447fa740ce0bad160838bf0dbe81e6b1.jpg

 

20210409_085941.thumb.jpg.b9754eb5df21928580b1756377d05bec.jpg

And pics of the rope coils:

 

20210409_091058.thumb.jpg.211e9ef7ee3012caaa90bffbcf74378a.jpg

20210409_090239.thumb.jpg.f9d59f2735277200b87bdb0ddd20714f.jpg

20210409_090306.thumb.jpg.992f4ca0716d01a0b6e7cdaebcbc20f0.jpg

20210409_090255.thumb.jpg.3fc1e8fb8b21eb925ef49da2360052c4.jpg

I'll next continue working on the spars. I might also do some work on the stay sail rigging as a break from the spars.

Edited by WalrusGuy

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Just stunning!

Been catching up on your progress. What a glorious brig 😉

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

4 hours ago, Edwardkenway said:

Just stunning!

Been catching up on your progress. What a glorious brig 😉

 

2 hours ago, NovaStorm said:

Just wonderful looking at your progress. Moving along nicely is an understatement :)

Many thanks for checking in and leaving the nice comments, Edward and Robin. And glad to see you back Robin! Looking forward to seeing progress in your beautiful Syren build 🙂 

Edited by WalrusGuy

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

I decided to go ahead and finish up the staysail rigging rather than work on the yards. For some reason the stirrups and footropes felt a bit daunting to attempt at this time. I will be trying to use thread with matt medium acrylic applied to stiffen them. I have never used this product, so very interesting to see how it all works.

 

For the staysail rigging I used waxed sewing thread (with beeswax) wherever ST was written on the plans. After installing the ropes, I started to make the coils, then I realized the thread I used is a tint lighter than Syren's ropes..... So I am planning to just dye the coils up a bit with very dilute tea water. Hoping this does the trick to match the colors. Here is a pic of the photo of the lighter colors contrasting with the thicker Syren rope. 

20210412_231928.thumb.jpg.6395a1ad91af9373094209d1e64fc1d5.jpg

And here are some pics of the staysail rigging. It was very hard to show the ropes with the white and cream background, so I tried to play around with the lighting to see if they show. I will be on the lookout for a greyish board/fabric I can use to contrast against the rope colors 😁

20210412_235126.thumb.jpg.e9483fa47cb0d65f51bc833523df56f1.jpg

20210412_234650.thumb.jpg.896051b5f4fb9e33a82bed8e257f319b.jpg

20210412_234812.thumb.jpg.c96dd9d13651294e9e464770d68d1623.jpg

20210412_234636.thumb.jpg.8bcff0c192d5773b8d882a5533987d1d.jpg

20210412_235145.thumb.jpg.ce0097f01b37f9d6f93181837598f72f.jpg

20210412_235044.thumb.jpg.f1ce13715224a9fd63280f5981571868.jpg

20210412_234916.thumb.jpg.020d87edda4a2ed5a210bea01370eb53.jpg

20210412_234733.thumb.jpg.fbb73b96346bc62ca19e9f5ab3dc3c47.jpg

20210412_234238.thumb.jpg.030b1ec9c803b9d1c0565cc07fa1c4bf.jpg

20210412_234235.thumb.jpg.188550e1cc95d3c99d20c06a2dd0aa73.jpg

20210412_234716.thumb.jpg.e03756519d57be368205a35f9148c8d1.jpg

20210412_234611.thumb.jpg.cc971bd7e5c63571568f505eeda5bf68.jpg

20210412_234852.thumb.jpg.5cf2ebbcf386e5dd0ef42e53920b07f1.jpg

20210412_234159.thumb.jpg.381fc6849f4ec98256bb0f4549ceb9e1.jpg

20210412_234125.thumb.jpg.6f32d9714d3b356babbfc1fecaf12b90.jpg

I'll next try to sort out the color issue with the rope coils, then will continue on with the yards.

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Thanks so much Thomas!! 😃

 

I dyed the sewing thread rope coils with some tea. I think that did the job. I just applied the tea with a toothpick, and allowed the strings to dry a bit. It's still a bit light, but matches the other ropes a bit better. Here are some pics:

20210413_203843.thumb.jpg.24f34914fd9b31eba7d3bd11c8db1cd2.jpg

20210413_203820.thumb.jpg.498fec5801339d07d2d36e9f50a6cb1f.jpg

And of the other rope coils

20210413_203918.thumb.jpg.23c45f6806b3cda531bfcdde1f2311de.jpg

20210413_204130.thumb.jpg.75f980b2b550c61ead9e2c6f86a27d58.jpg

20210413_204049.thumb.jpg.097a744b14a64ec56937f215ef348e20.jpg

Really enjoying making rope coils as an intermediate step. I don't think I'd feel the same if I did them all at once at the end 😬

 

Will now continue working on the yards, very curious on how they turn out (especially the footropes!)

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...